FEATURES PROFESSIONAL LED INDICATORS Ø12.7mm Mounting 652 SERIES l Each product will operate over a wide voltage input range PACK QUANTITY = 10 PIECES l Black anodised aluminium housing l 180° viewing angle l Full internal potting to resist shock and vibration l Sealed to IP67 l True Bi-polar product SPECIFICATIONS Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE OPERATING STORAGE LENGTH TEMP TEMP λp (nm) Topr Tstg HIGH INTENSITY 652-105-63 Red Colour Diffused 12-28 6-16 100 627 -40 ~ +85^ -40 ~ +85 Yes 652-102-63 Red (GaAlAs) Colour Diffused 12-28 6-16 450 660 -40 ~ +85^ -40 ~ +85 Yes 652-111-63 Yellow Colour Diffused 12-28 6-16 50 590 -40 ~ +85^ -40 ~ +85 Yes 652-114-63 Green Colour Diffused 12-28 6-16 60 565 -40 ~ +85^ -40 ~ +85 Yes 652-105-75 Red Colour Diffused 110Vac 6 100 627 -40 ~ +85^ -40 ~ +85 Yes 652-102-75 Red (GaAlAs) Colour Diffused 110Vac 6 450 660 -40 ~ +85^ -40 ~ +85 Yes 652-111-75 Yellow Colour Diffused 110Vac 6 50 590 -40 ~ +85^ -40 ~ +85 Yes 652-114-75 Green Colour Diffused 110Vac 6 60 565 -40 ~ +85^ -40 ~ +85 Yes Vac/Vdc mA mcd nm °C °C UNITS 105,102,111 & 114 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 069/07 Issue 2 SAMPLES AVAILABLE Page 1 of 2 652 Series All other voltages 20mA to 48Vac/dc Mounting Hole Dimensions in mm (Typical) Mounting hole to be clean and burr free Not to scale MATERIALS PUSH-ON CONNECTORS Body Aluminium grade 6063 black anodised Nut Stainless Steel grade 303 Panel Seal Viton Termination Copper with silver flash finish Lock Washer Zinc plated steel Fresnel lens Polycarbonate Encapsulation PC5430 Header Nylon6 A82 925-000-00 is brass tin plated. For use with 652 series lamps. Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES MAXIMUM PANEL POWER DISSIPATION 652 NUT CUTOUT MOUNTING TORQUE MINIMUM MOUNTING CENTRES MIN/MAX. PANEL THICKNESS 825 12.7 1.0 x,y=19.5 1.5-8.0 mW mm Nm mm mm How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 069/07 Issue 2 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 2