Revised February 2005
74VCX00
Low Voltage Quad 2-Input NAND Gate
with 3.6V Tolerant Inputs and Outputs
General Description
Features
The VCX00 contains four 2-input NAND gates. This product is designed for low voltage (1.2V to 3.6V) VCC applications with I/O compatibility up to 3.6V.
■ 1.2V to 3.6V VCC supply operation
The VCX00 is fabricated with an advanced CMOS technology to achieve high-speed operation while maintaining low
CMOS power dissipation.
■ 3.6V tolerant inputs and outputs
■ tPD
2.8 ns max for 3.0V to 3.6V VCC
■ Power-off high impedance inputs and outputs
■ Static Drive (IOH/IOL)
r24 mA @ 3.0V VCC
■ Uses patented noise/EMI reduction
circuitry
■ Latchup performance exceeds JEDEC 78 conditions
■ ESD performance:
Human body model ! 2000V
Machine model ! 250V
■ Leadless Pb-Free DQFN package
Ordering Code:
Order Number
74VCX00M
74VCX00BQX
(Note 1)
Package
Package Description
Number
M14A
MLP014A
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Pb-Free 14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC
MO-241, 2.5 x 3.0mm
74VCX00MTC
MTC14
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
74VCX00MTCX_NL
(Note 2)
MTC14
Pb-Free 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm
Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Pb-Free package per JEDED J-STD-020B.
Note 1: DQFN package available in Tape and Reel only.
Note 2: “_NL” indicates Pb-Free package (per JEDEC J-STD-020B). Device available in Tape and Reel only.
© 2005 Fairchild Semiconductor Corporation
DS500160
www.fairchildsemi.com
74VCX00 Low Voltage Quad 2-Input NAND Gate with 3.6V Tolerant Inputs and Outputs
July 1999
74VCX00
Connection Diagrams
Logic Symbol
IEEE/IEC
Pin Assignments for SOIC and TSSOP
Pin Descriptions
Pin Names
Pad Assignments for DQFN
Description
An, Bn
Inputs
On
Outputs
(Top View)
www.fairchildsemi.com
2
Recommended Operating
Conditions (Note 5)
0.5V to 4.6V
0.5V to 4.6V
Supply Voltage (VCC)
DC Input Voltage (VI)
Power Supply
Output Voltage (VO)
HIGH or LOW State (Note 4)
VCC
0V
0.5V to VCC 0.5V
0.5V to 4.6V
Operating
1.2V to 3.6V
Input Voltage
0.3V to 3.6V
Output Voltage (VO)
DC Input Diode Current (IIK)
HIGH or LOW State
VI 0V
50 mA
VO 0V
VO ! VCC
DC Output Source/Sink Current (IOL/IOL)
DC VCC or Ground Current per
0V to VCC
Output Current in IOH/IOL
DC Output Diode Current (IOK)
VCC
3.0V to 3.6V
VCC
2.3V to 2.7V
VCC
1.65V to 2.3V
VCC
1.4V to 1.6V
50 mA
50 mA
r50 mA
r100 mA
VCC
1.2V
Supply Pin (ICC or Ground)
Storage Temperature Range (Tstg)
74VCX00
Absolute Maximum Ratings(Note 3)
Free Air Operating Temperature (TA)
65qC to 150qC
r24 mA
r18 mA
r6 mA
r2 mA
r 100 PA
40qC to 85qC
Minimum Input Edge Rate ('t/'V)
VIN
0.8V to 2.0V, VCC
3.0V
10 ns/V
Note 3: The Absolute Maximum Ratings are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation.
Note 4: IO Absolute Maximum Rating must be observed.
Note 5: Floating or unused inputs must be held HIGH or LOW
DC Electrical Characteristics
Symbol
VIH
VIL
Parameter
Conditions
HIGH Level Input Voltage
VCC
(V)
2.7 - 3.6
LOW Level Input Voltage
Min
HIGH Level Output Voltage
1.6
1.65 - 2.3
0.65 u VCC
1.4 - 1.6
0.65 u VCC
1.2
0.65 u VCC
2.7 - 3.6
V
0.8
2.3 - 2.7
0.7
1.65 - 2.3
0.35 u V CC
1.4 - 1.6
0.35 u V CC
V
0.05 x VCC
IOH
100 PA
2.7 - 3.6
VCC 0.2
IOH
12 mA
2.7
2.2
IOH
18 mA
3.0
2.4
IOH
24 mA
3.0
2.2
IOH
100 PA
2.3 - 2.7
VCC 0.2
IOH
6 mA
2.3
2.0
IOH
12 mA
2.3
1.8
IOH
18 mA
2.3
1.7
IOH
100 PA
1.65 - 2.3
VCC 0.2
IOH
6 mA
IOH
100 PA
IOH
2 mA
1.4
1.05
IOH
100 PA
1.2
VCC 0.2
3
Units
2.0
2.3 - 2.7
1.2
VOH
Max
1.65
1.25
1.4 - 1.6
VCC 0.2
V
www.fairchildsemi.com
74VCX00
DC Electrical Characteristics
Symbol
(Continued)
Parameter
VCC
Conditions
Min
Max
Units
(V)
VOL
LOW Level Output Voltage
IOL
100 PA
2.7 - 3.6
0.2
IOL
12 mA
2.7
0.4
IOL
18 mA
3.0
0.4
IOL
24 mA
3.0
0.55
IOL
100 PA
2.3 - 2.7
0.2
IOL
12 mA
2.3
0.4
IOL
18 mA
2.3
0.6
IOL
100 PA
1.65 - 2.3
0.2
IOL
6 mA
1.65
0.3
IOL
100 PA
IOL
2 mA
IOL
100 PA
II
Input Leakage Current
0 d VI d 3.6V
IOZ
3-STATE Output Leakage
0 d VO d 3.6V
VI
VIH or VIL
IOFFI
Power-OFF Leakage Current
0 d (VI, VO) d 3.6V
ICC
Quiescent Supply Current
VI
'ICC
Increase in ICC per Input
VIH
VCC or GND
VCC d (VI, VO) d 3.6V (Note 6)
VCC 0.6V
1.4 - 1.6
0.2
1.4
0.35
V
1.2
0.05
1.4 - 3.6
r5.0
PA
1.4 - 3.6
r10
PA
PA
0
10
1.4 - 3.6
20
1.4 - 3.6
r20
2.7 - 3.6
750
PA
PA
Note 6: Outputs disabled or 3-STATE only.
AC Electrical Characteristics
Symbol
tPHL,
Parameter
Propagation Delay
(Note 7)
Conditions
CL
30 pF, RL
500:
tPLH
CL
tOSHL
Output to Output Skew
tOSLH
(Note 8)
CL
CL
Note 7: For CL
15 pF, RL
30 pF, RL
15 pF, RL
2k:
500:
2k:
VCC
TA
40qC to 85qC
(V)
Min
Max
3.3 r 0.3
0.6
2.8
2.5 r 0.2
0.8
3.7
1.8 r 0.15
1.0
7.4
1.5 r 0.1
1.0
14.8
1.2
1.5
37.0
3.3 r 0.3
Units
Figure
Number
Figures
1, 2
ns
Figures
3, 4
0.5
2.5 r 0.2
0.5
1.8 r 0.15
0.75
1.5 r 0.1
1.5
1.2
1.5
ns
50PF, add approximately 300 ps to the AC maximum specification.
Note 8: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The
specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH).
www.fairchildsemi.com
4
Symbol
VOLP
VOLV
VOHV
Parameter
VCC
Conditions
Quiet Output Dynamic Peak VOL
CL
Quiet Output Dynamic Valley VOL
CL
Quiet Output Dynamic Valley VOH
CL
30 pF, VIH
30 pF, VIH
30 pF, VIH
VCC, VIL
0V
VCC, VIL
0V
VCC, VIL
0V
TA
25qC
(V)
Typical
1.8
0.25
2.5
0.6
3.3
0.8
1.8
0.25
2.5
0.6
3.3
0.8
1.8
1.5
2.5
1.9
3.3
2.2
Unit
V
V
V
Capacitance
Symbol
Parameter
TA
Conditions
25qC
Typical
Units
CIN
Input Capacitance
VI
0V or VCC, VCC
1.8V, 2.5V or 3.3V
6
COUT
Output Capacitance
VI
0V or VCC, VCC
1.8V, 2.5V or 3.3V
7
pF
CPD
Power Dissipation Capacitance
VI
0V or VCC, f
20
pF
10 MHz, VCC
1.8V, 2.5V or 3.3V
pF
AC Loading and Waveforms (VCC 3.3V r 0.3V to 1.8V r 0.15V)
FIGURE 1. AC Test Circuit
TEST
SWITCH
tPLH, tPHL
Open
FIGURE 2. Waveform for Inverting and Non-inverting Functions
Symbol
VCC
3.3V r 0.3V
2.5V r 0.2V
1.8V r 0.15V
Vmi
1.5V
VCC/2
VCC/2
Vmo
1.5V
VCC/2
VCC/2
5
www.fairchildsemi.com
74VCX00
Dynamic Switching Characteristics
74VCX00
AC Loading and Waveforms (VCC 1.5 r 0.1V to 1.2V)
TEST
SWITCH
tPLH, tPHL
Open
tPZL, tPLZ
1.5V r 0.1V
VCC x 2 at VCC
tPZH, tPHZ
GND
FIGURE 3. AC Test Circuit
FIGURE 4. Waveform for Inverting and Non-Inverting Functions
VCC
Symbol
www.fairchildsemi.com
1.5V r 0.1V
Vmi
VCC/2
Vmo
VCC/2
6
Tape Format for DQFN
Package
Designator
BQX
Tape
Number
Cavity
Section
Cavities
Status
Cover Tape
Status
Leader (Start End)
125 (typ)
Empty
Sealed
Carrier
2500/3000
Filled
Sealed
Trailer (Hub End)
75 (typ)
Empty
Sealed
TAPE DIMENSIONS inches (millimeters)
REEL DIMENSIONS inches (millimeters)
Tape Size
12 mm
A
B
C
D
N
W1
W2
13.0
0.059
0.512
0.795
7.008
0.488
0.724
(330)
(1.50)
(13.00)
(20.20)
(178)
(12.4)
(18.4)
7
www.fairchildsemi.com
74VCX00
Tape and Reel Specification
74VCX00
Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Package Number M14A
www.fairchildsemi.com
8
74VCX00
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
Pb-Free 14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.0mm
Package Number MLP014A
9
www.fairchildsemi.com
74VCX00 Low Voltage Quad 2-Input NAND Gate with 3.6V Tolerant Inputs and Outputs
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC14
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
www.fairchildsemi.com
10