General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 sensitive n1 pole 10A, 1 form C (CO) or 1 form A (NO) contact sensitive version, coil power 250mW n5kV/10mm coil-contact nReinforced insulation nAmbient temperature 85°C nHighly Typical applications Domestic appliances, heating control F0145-C VZb Approvals VDE REG.-Nr. 6106,UL E214025, cCSAus 14385 Technical data of approved types on request Contact Data Contact arrangement 1 form C (CO) or 1 form A (NO) Rated voltage 250VAC Max. switching voltage 400 VAC Rated current 10A Limiting making current; max. 4s, duty factor 10% 15A Breaking capacity 2500VA Contact material AgNi 90/10 Frequency of operation; with/without load 3000/72000h-1 Operate/release time max. 10/8ms Bounce time max.; form A/form B 4/9ms Contact ratings Type Contact Load Cycles IEC 61810 RT174 A/B (NO/NC) 10A, 250VAC resistive, 85°C 100x103 UL 508 RT174 C (CO) 10A, 250VAC, general purpose, 85°C 6x103 RT174 A/B (NO/NC) 10A, 250VAC, general purpose, 40°C 30x103 RT174 A/B (NO/NC) B300, 40°C 6x103 RT174 A (NO) R150, 40°C 6x103 RT174 B (NC) 1/2hp, 240VAC, 40°C 1x103 RT174 A (NO) 3/4hp, 240VAC, 40°C 1x103 EN60730-1 RT174 A (NO) 6(4)A, 250VAC, 85°C 100x103 Mechanical endurance Coil Data Coil voltage range Operative range, IEC 61810 Coil insulation system according UL Coil versions, DC coil Coil Rated Operate code voltage voltage VDC VDC 005 5 3.7 006 6 4.5 009 9 6.8 012 12 9.0 024 24 18.0 048 48 36.0 060 60 45.0 5 to 60VDC 2 class F Release voltage VDC 0.5 0.6 0.9 1.2 2.4 4.8 6.0 Coil resistance Ω±10%1) 100 144 312 576 2304 9216 128571) Rated coil power mW 250 250 260 250 250 250 280 1) Coil resistance ±12%. All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. >30x106 operations Insulation Data Initial dielectric strength between open contacts between contact and coil Clearance/creepage between contact and coil Material group of insulation parts Tracking index of relay base 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 1000Vrms 5000Vrms ≥10/10mm IIIa PTI 250V Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 sensitive (Continued) Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to 85°C Category of environmental protection IEC 61810 RTII - flux proof, RTIII - wash tight Vibration resistance (functional), form A/form B contact, 30 to 500Hz 20g/5g Shock resistance (destructive) 100g Terminal type PCB-THT, plug-in Weight 14g Resistance to soldering heat THT, IEC 60068-2-20 RTII 270°C/10s RTIII 260°C/5s Packaging/unit tube/20 pcs., box/500 pcs. PCB layout / terminal assignment Bottom view on solder pins 10A, pinning 3.5mm S0418-CB *) With the recommended PCB hole sizes a grid pattern from 2.5mm to 2.54mm can be used. Accessories For details see datasheet Accessories Industrial Power Relay RT NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1); for relays mounted on sockets deratings may apply. 1 form C (CO) contact Dimensions S0163-BG 1 form A (NO) contact S0163-BH S0272-BB Product code structure Typical product code Type RT Power PCB Relay RT1 sensitive Version 1 10A, pinning 3.5mm, flux proof Contact configuration 7 1 form C (CO) contact Contact material 4 AgNi 90/10 Coil Coil code: please refer to coil versions table Product code Version 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company 1 7 4 012 B 10A, pinning 3.5mm, wash tight 8 1 form A (NO) contact Contacts Contact material RT174005 Flux proof 1 form C (CO) AgNi 90/10 RT174009 contact RT174012 RT174024 RT184005 1 form A (NO) RTB84009 Wash tight contact This list represents the most common types and does not show all variants covered by this datasheet. Other types on request 2 RT Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Coil 5VDC 9VDC 12VDC 24VDC 5VDC 9VDC Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Part number 3-1393239-6 9-1419143-5 3-1393239-8 3-1393239-9 4-1393239-5 4-1393238-7 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.