ETC 95111

Single head system
Dimensions
22
134
100
100
117
13
5.5
LED window
UC2000-F43-2KIR2-V17
UC2000-F43-2KIR2-V17
M4
Bore holes for thread M4
(The delivery includes 4 pcs.)
41
5.5
30
52
Transducer 5 mm countersunk
Features
Technische
Technical
data
Daten
• Current output
General specifications
• 2 Relays
• Serial Interfaces
• Temperature compensation
• Watchdog
Sensing range
Standard target plate
Unusable area
Transducer frequency
Response delay
100 ... 2000 mm
100 mm x 100 mm
100 mm
approx. 175 kHz
minimum (EM; NONE): ≤50 ms (2 measuring cycles)
factory setting (EM, MXN, 5, 2): ≤150 ms (6 measuring cycles)
dynamic (EM, DYN): ≤75 ms (3 measuring cycles)
EN 60947-5-2
• Reverse polarity protection
Standard conformity
• Parameterisable
Indicating/Operating means
LED green
continuous: object in the measuring window
flashing: object outside the measuring window
error (e. g. interference level too high)
LED red
Electrical specifications
Power consumption
P0
Output
Output type
Contact loading
Lifetime
Electrical connection
Standard symbol/Connection:
U
2
1
4
6
7
3
5
+UB
-UB
RxD
TxD
Range hysteresis
H
Repeat accuracy
Resolution
Load impedance
Deviation of the characteristic
curve
Temperature influence
Interface
Interface type
Ambient conditions
Ambient temperature
Storage temperature
Mechanical specifications
Protection degree
Connection type
Material
Housing
Mass
Subject to reasonable modifications due to technical advances.
1
10 ... 30 V DC without current output function
15 ... 30 V DC with current output function
Ripple ±10 %SS
≤ 2 W (all relays pulled-in, current output 20 mA)
no-load power consumption ≤ 0.7 W
2 relay outputs, 1 analogue output 4 ... 20 mA
60 V DC / 1 A (max. 24 W DC), ohmic
electrical: 3 x 105 operating cycles at ohm. Load
(1 A / 24 V DC)
mechanical: 107 operating cycles
0 ... 15 % Parameterisable
≤ 0.1 %
0.5 mm
current output: ≤ 500 Ohm
< 0.2 % of final value
≤ 2 %, internal temperature compensation
RS 232, 9600 bit/s, no parity, 8 data bits, 1 stop bit
-25 ... +70 °C (248 ... 343 K)
-40 ... +85 °C
IP65 according to EN 60529
8-pin round connector, Lumberg type RSF 8
Ausgabedatum26.03.2001
Rated operational voltage Ue
PBT
290 g
Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com
Note
Hinweise
Model number
UC2000-F43-2KIR2-V17
Thanks to its extensive command set, the sensor can be configured to suit the application via the RS 232 interface.
RS 232 command set (overview)
Command
VS0
Meaning
Velocity of Sound at 0 °C
VS
TO
TEM
Velocity of Sound
Temperature Offset
TEMperature
REF
REFerence measurement REF distance in [mm] {100 ... 4000}
SD1
Switching Distance 1
SD2
SH1
SH2
NDE
FDE
BR
CBT
CCT
FTO
EM
CON
OM
FSF
MD
MA
NEF
AD
RD
RT
SS1
SS2
ADB
RDB
RTB
ER
VER
ID
DAT
Switching point, relay 1 SD1 in [mm] {100
... 4000}
Switching Distance 2
Switching point, relay 2 SD1 in [mm] {100
... 4000}
Switching Hysteresis 1
Hysteresis, relay 1 in [%] {0 ... 15}
Switching Hysteresis 2
Hysteresis, relay 2 in [%] {0 ... 15}
Near Distance of Evalua- Near measuring window limit in [mm]
tion
{100 ... 4000}
Far Distance of Evaluation Far measuring window limit in [mm]{100 ...
4000}
Blind Range
Unusable area in [mm] {100 ... 4000}
Constant Burst Time
Burst length in [µs] {0,1, 2, 3}
Constant Cycle Time
Time in [ms] {0 ... 1000}
Filter TimeOut
Number of measurements without echo to
be filtered {0 ... 255}
Evaluation Method
Evaluation method { 0 = NONE;
PT1[,f,p,c]; MXN[,m,n]; DYN[,p] }
CONservative filter
Counter threshold as number {0 ... 255}
Output Mode
OM coded [normally-open NO = 0, normally-closed NC = 1]
Fail Safe Function
Failure function type e.g. FSF,11,35 {0,1,2},
[fault current in 0.1 mA]
Master Device
Function as master
{0 = NONE},AD,RD,RT,SS,ADB,RDB,RTB }
Main Application
Determines whether the green LED orients
itself according to NDE, FDE or SD1 and
SD2
No Echo Failure
Sensor behavior when no echo is present
{0,1}
Absolute Distance
Distance in [mm]
Relative Distance
Relative distance as number {0 ... 4095}
RunTime
Echo run time in machine cycles
[1 machine cycle = 1.085 µs]
Switching State 1
SS1 binary [0: inactive, 1 active] (independent of OM)
Switching State 2
SS2 binary [0: inactive, 1 active] (independent of OM)
Absolute Distance Binary Distance in [mm] not as ASCII
Relative Distance Binary Relative distance as number {0 ... 4095}
not as ASCII
RunTime Binary
Echo run time in machine cycles
[1 machine cycle = 1.085 µs] not as ASCII
Echo Received
Echo detected: no, yes [0/1]
VERsion
Version string: xxxx
IDentification
ID string: P&F UC2000-F43-2KIR2-V17...
DATe
Date string: e.g. Date: e.g. 04/12/99
Time: 11:14:35
STatus
Status as hexadecimal string
ReSeT
Performs a reset
DEFault settings
Restores defaults
Store User Configuration Stores all settings
Recall User Configuration Restores stored settings
Access
read and set
read
read and set
read and
adapt to TO
adaptation of
VS0
read and set
Characteristic curves/
Additional information
Characteristic response curves
90 80 70
60
50
40
Angle [degrees]
30
20
10
read and set
2
read and set
read and set
read and set
read and set
read and set
read and set
read and set
read and set
0.6
-10
0.9
Distance [m]
1.5
1.8
2.1
2.4
2.7
3.0
-20
3.3
Curve 1: flat plate 100 mm x 100 mm
Curve 2: round bar, Ø 25 mm
Basic setting
OM:
Relay 1: NO
Relay 2: NO
SD1/SD2:
Switch point relay 1 = 100 mm
Switch point relay 2 = 2000 mm
read and set
NDE/FDE:
Analogue output: 4 mA ⇒ 100 mm
20 mA ⇒ 2000 mm
read and set
FSF:
Error
read and set
NEF:
No echo ⇒ error message
read
read
read
-0
0.3
1.2
read and set
read and set
read and set
read and set
1
0.0
⇒ Relay 1 and 2: latest state
⇒ Analogue output: IOUT = 3,9 mA
MA,S:
Switching mode
read
read
read
read
read
read
read
read
read
read
Command
Command
Command
Command
Ausgabedatum26.03.2001
ST
RST
DEF
SUC
RUC
Parameter
Velocity of sound at 0 °centigrade VS0 in
[cm/s] {10000 ... 60000)
Velocity of sound VS in [cm/s]
TO in [0.1K]
TEM in [0.1K]
Subject to reasonable modifications due to technical advances.
Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com
2