Model A300B50X1A RoHS Compliant Chip Termination 300 Watts, 50Ω General Specifications Resistive Element Substrate Terminal Finish Operating Temperature Thick film Beryllium oxide Ceramic Thick film Silver -55 to +125°C (see chart) Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Features: • DC – 1.0 GHz • 300 Watts • BeO Ceramic • Non-Nichrome Resistive Element Electrical Specifications Resistance Value: Power: Frequency Range: V.S.W.R.: 50 ohms, ± 2% 300 Watts DC – 1.0 GHz 1.25:1 Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change without notice • Low VSWR • 100% Tested • RoHS Compliant Outline Drawing A300B50X1A (097) Rev B Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model A300B50X1A Typical Performance: Power De-rating: Suggested Mounting Procedure: A300B50X1A (097) Rev B USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.