AD AD828AR

a
Dual, Low Power
Video Op Amp
AD828
FEATURES
Excellent Video Performance
Differential Gain and Phase Error of 0.01% and 0.05
High Speed
130 MHz 3 dB Bandwidth (G = +2)
450 V/s Slew Rate
80 ns Settling Time to 0.01%
Low Power
15 mA Max Power Supply Current
High Output Drive Capability
50 mA Minimum Output Current per Amplifier
Ideal for Driving Back Terminated Cables
Flexible Power Supply
Specified for +5 V, 5 V, and 15 V Operation
3.2 V Min Output Swing into a 150 Load
(VS = 5 V)
Excellent DC Performance
2.0 mV Input Offset Voltage
Available in 8-Lead SOIC and 8-Lead Plastic Mini-DIP
The AD828 is a low cost, dual video op amp optimized for use
in video applications that require gains of +2 or greater and
high output drive capability, such as cable driving. Due to its
low power and single-supply functionality, along with excellent
differential gain and phase errors, the AD828 is ideal for powersensitive applications such as video cameras and professional
video equipment.
With video specs like 0.1 dB flatness to 40 MHz and low
differential gain and phase errors of 0.01% and 0.05°, along
with 50 mA of output current per amplifier, the AD828 is an
excellent choice for any video application. The 130 MHz gain
bandwidth and 450 V/µs slew rate make the AD828 useful in
many high speed applications, including video monitors, CATV,
color copiers, image scanners, and fax machines.
+V
OUT1
1
8
V+
–IN1
2
7
OUT2
+IN1
3
6
–IN2
V–
4
5
+IN2
AD828
The AD828 is fully specified for operation with a single 5 V
power supply and with dual supplies from ± 5 V to ± 15 V. This
power supply flexibility, coupled with a very low supply current
of 15 mA and excellent ac characteristics under all power supply
conditions, make the AD828 the ideal choice for many demanding yet power-sensitive applications.
The AD828 is a voltage feedback op amp that excels as a gain
stage (gains > +2) or active filter in high speed and video systems
and achieves a settling time of 45 ns to 0.1%, with a low input
offset voltage of 2 mV max.
The AD828 is available in low cost, small 8-lead plastic mini-DIP
and SOIC packages.
0.03
0.1F
0.02
VIN
RT
75
R BT
75
1/2
AD828
0.1F
75
RT
75
–V
1k
1k
Figure 1. Video Line Driver
DIFFERENTIAL PHASE – Degrees
DIFF GAIN
0.01
0.07
0.06
DIFFERENTIAL GAIN – Percent
GENERAL DESCRIPTION
FUNCTIONAL BLOCK DIAGRAM
DIFF PHASE
0.05
0.04
5
10
SUPPLY VOLTAGE – V
15
Figure 2. Differential Phase vs. Supply Voltage
REV. C
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
www.analog.com
Fax: 781/326-8703
© Analog Devices, Inc., 2002
AD828–SPECIFICATIONS
(@ TA = 25C, unless otherwise noted.)
Parameter
Conditions
VS
Min
Typ
DYNAMIC PERFORMANCE
–3 dB Bandwidth
Gain = +2
±5 V
± 15 V
0, +5 V
±5 V
± 15 V
0, +5 V
±5 V
± 15 V
0, +5 V
±5 V
± 15 V
0, +5 V
60
100
30
35
60
20
30
30
10
15
30
10
85
130
45
55
90
35
43
40
18
25
50
19
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
22.3
MHz
7.2
350
450
250
45
45
80
80
MHz
V/µs
V/µs
V/µs
ns
ns
ns
ns
± 15 V
± 5 V, ± 15 V
± 5 V, ± 15 V
± 15 V
±5 V
0, +5 V
± 15 V
±5 V
0, +5 V
–78
10
1.5
0.01
0.02
0.08
0.05
0.07
0.1
dB
nV/√Hz
pA/√Hz
%
%
%
Degrees
Degrees
Degrees
± 5 V, ± 15 V
0.5
± 5 V, ± 15 V
10
3.3
± 5 V, ± 15 V
25
Gain = –1
Bandwidth for 0.1 dB Flatness
Gain = +2
CC = 1 pF
Gain = –1
CC = 1 pF
Full Power Bandwidth*
Slew Rate
Settling Time to 0.1%
Settling Time to 0.01%
NOISE/HARMONIC PERFORMANCE
Total Harmonic Distortion
Input Voltage Noise
Input Current Noise
Differential Gain Error
(RL = 150 Ω)
Differential Phase Error
(RL = 150 Ω)
VOUT = 5 V p-p
RLOAD = 500 Ω
VOUT = 20 V p-p
RLOAD = 1 kΩ
RLOAD = 1 kΩ
Gain = –1
±5 V
–2.5 V to +2.5 V
0 V–10 V Step, AV = –1
–2.5 V to +2.5 V
0 V–10 V Step, AV = –1
FC = 1 MHz
f = 10 kHz
f = 10 kHz
NTSC
Gain = +2
NTSC
Gain = +2
DC PERFORMANCE
Input Offset Voltage
± 15 V
±5 V
± 15 V
0, +5 V
±5 V
± 15 V
±5 V
± 15 V
300
400
200
TMIN to TMAX
Offset Drift
Input Bias Current
TMIN
TMAX
Input Offset Current
TMIN to TMAX
Offset Current Drift
Open-Loop Gain
VOUT = ± 2.5 V
RLOAD = 500 Ω
TMIN to TMAX
RLOAD = 150 Ω
VOUT = ± 10 V
RLOAD = 1 kΩ
TMIN to TMAX
VOUT = ± 7.5 V
RLOAD = 150 Ω (50 mA Output)
INPUT CHARACTERISTICS
Input Resistance
Input Capacitance
Input Common-Mode Voltage Range
± 15 V
± 15 V
±5 V
± 15 V
0, +5 V
Common-Mode Rejection Ratio
VCM = +2.5 V, TMIN to TMAX
VCM = ± 12 V
TMIN to TMAX
–2–
0.3
±5 V
±5 V
± 15 V
± 15 V
Max
0.02
0.03
0.09
0.1
2
3
6.6
10
4.4
300
500
Unit
mV
mV
µV/°C
µA
µA
µA
nA
nA
nA/°C
3
2
2
5
5.5
2.5
9
V/mV
V/mV
3
5
V/mV
+3.8
–2.7
+13
–12
+3.8
+1.2
82
86
84
300
1.5
+4.3
–3.4
+14.3
–13.4
+4.3
+0.9
100
120
100
kΩ
pF
V
V
V
V
V
V
dB
dB
dB
4
V/mV
V/mV
V/mV
REV. C
AD828
Parameter
OUTPUT CHARACTERISTICS
Output Voltage Swing
Conditions
VS
Min
Typ
RLOAD = 500 Ω
RLOAD = 150 Ω
RLOAD = 1 kΩ
RLOAD = 500 Ω
±5 V
±5 V
± 15 V
± 15 V
3.8
3.6
13.7
13.4
±V
±V
±V
±V
RLOAD = 500 Ω
0, +5 V
± 15 V
±5 V
0, +5 V
± 15 V
3.3
3.2
13.3
12.8
1.5
3.5
50
40
30
90
8
±V
mA
mA
mA
mA
Ω
dB
dB
V/µs
Output Current
Short Circuit Current
Output Resistance
MATCHING CHARACTERISTICS
Dynamic
Crosstalk
Gain Flatness Match
Skew Rate Match
DC
Input Offset Voltage Match
Input Bias Current Match
Open-Loop Gain Match
Common-Mode Rejection Ratio Match
Power Supply Rejection Ratio Match
POWER SUPPLY
Operating Range
Open-Loop
f = 5 MHz
G = +1, f = 40 MHz
G = –1
± 15 V
± 15 V
± 15 V
–80
0.2
10
TMIN to TMAX
TMIN to TMAX
VO = ±10 V, RL = 1 kΩ, TMIN to TMAX
VCM = ± 12 V, TMIN to TMAX
± 5 V to ± 15 V, TMIN to TMAX
± 5 V, ± 15 V
± 5 V, ± 15 V
± 15 V
± 15 V
0.5
0.06
0.01
100
100
Dual Supply
Single Supply
Power Supply Rejection Ratio
TMIN to TMAX
TMIN to TMAX
VS = ± 5 V to ± 15 V, TMIN to TMAX
Unit
2
0.8
0.15
mV
µA
mV/V
dB
dB
± 18
+36
15
15
15
V
V
mA
mA
mA
dB
90
ORDERING GUIDE
Temperature
Range
Model
AD828AN
–40°C to +85°C
AD828AR
–40°C to +85°C
AD828AR-REEL7 –40°C to +85°C
AD828AR-REEL –40°C to +85°C
Package
Description
Package
Option
8-Lead Plastic DIP
8-Lead Plastic SOIC
7" Tape and Reel
13" Tape and Reel
N-8
SO-8
SO-8
SO-8
2.0
TJ = 150C
MAXIMUM POWER DISSIPATION – Watts
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 18 V
Internal Power Dissipation2
Plastic DIP (N) . . . . . . . . . . . . . . . . . . See Derating Curves
Small Outline (R) . . . . . . . . . . . . . . . . . See Derating Curves
Input Voltage (Common Mode) . . . . . . . . . . . . . . . . . . . . ± VS
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . ± 6 V
Output Short Circuit Duration . . . . . . . . See Derating Curves
Storage Temperature Range (N, R) . . . . . . . . –65°C to +125°C
Operating Temperature Range . . . . . . . . . . . . –40°C to +85°C
Lead Temperature Range (Soldering 10 sec) . . . . . . . . +300°C
14.0
14.0
80
*Full power bandwidth = slew rate/2 π VPEAK.
Specifications subject to change without notice.
ABSOLUTE MAXIMUM RATINGS 1
± 2.5
+5
±5 V
±5 V
±5 V
Quiescent Current
80
80
Max
NOTES
1
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
2
Specification is for device in free air:
8-Lead Plastic DIP Package: θJA = 100°C/W
8-Lead SOIC Package: θJA = 155°C/W
8-LEAD MINI-DIP PACKAGE
1.5
1.0
0.5
8-LEAD SOIC PACKAGE
0
–50 –40 –30 –20 –10 0 10 20 30 40 50 60 70
AMBIENT TEMPERATURE – C
80
90
Figure 3. Maximum Power Dissipation vs.
Temperature for Different Package Types
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the AD828 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
REV. C
–3–
WARNING!
ESD SENSITIVE DEVICE
AD828—Typical Performance Characteristics
7.7
QUIESCENT SUPPLY CURRENT PER AMP – mA
INPUT COMMON-MODE RANGE – V
20
15
+VCM
10
–V CM
5
+85C
0
5
10
15
SUPPLY VOLTAGE – V
–40C
6.2
0
20
TPC 1. Common-Mode Voltage Range vs. Supply
Voltage
15
450
SLEW RATE – V/s
500
RL = 500
10
15
10
SUPPLY VOLTAGE – V
20
RL = 150
400
350
5
300
0
5
15
10
SUPPLY VOLTAGE – V
20
0
TPC 2. Output Voltage Swing vs. Supply Voltage
10
SUPPLY VOLTAGE – V
15
20
CLOSED-LOOP OUTPUT IMPEDANCE – 100
25
Vs = 15V
20
15
10
Vs = 5V
5
0
10
5
TPC 5. Slew Rate vs. Supply Voltage
30
OUTPUT VOLTAGE SWING – V p-p
5
TPC 4. Quiescent Supply Current per Amp vs. Supply
Voltage for Various Temperatures
20
0
+25C
6.7
5.7
0
OUTPUT VOLTAGE SWING – V
7.2
100
1k
LOAD RESISTANCE – 10
1
0.1
0.01
1k
10k
10k
100k
1M
FREQUENCY – Hz
10M
100M
TPC 6. Closed-Loop Output Impedance vs. Frequency
TPC 3. Output Voltage Swing vs. Load Resistance
–4–
REV. C
7
100
6
80
PHASE 5V OR
15V SUPPLIES
100
80
OPEN-LOOP GAIN – dB
15V SUPPLIES
5
4
3
60
60
40
40
5V SUPPLIES
20
20
0
2
0
RL = 1k
1
–60
–40
–20
0
20
40
60
80
100
120
–20
1k
140
10k
TEMPERATURE – C
TPC 7. Input Bias Current vs. Temperature
100k
1M
10M
FREQUENCY – Hz
100M
1G
TPC 10. Open-Loop Gain and Phase Margin vs.
Frequency
9
130
OPEN-LOOP GAIN – V/mV
SHORT CIRCUIT CURRENT – mA
15V
8
110
SOURCE CURRENT
90
SINK CURRENT
70
50
30
–60
7
5V
6
5
4
–40
–20
0
20
40
60
80
100
120
3
100
140
1k
LOAD RESISTANCE – TEMPERATURE – C
TPC 8. Short Circuit Current vs. Temperature
80
10k
TPC 11. Open-Loop Gain vs. Load Resistance
100
80
80
70
PHASE MARGIN
60
60
GAIN BANDWIDTH
50
50
+SUPPLY
70
PSRR – dB
70
–3dB BANDWIDTH – MHz
PHASE MARGIN – Degrees
90
60
50
–SUPPLY
40
30
20
40
–60
–40
–20
0
20
40
60
80
TEMPERATURE – C
100
120
10
100
40
140
TPC 9. –3 dB Bandwidth and Phase Margin vs.
Temperature, Gain = +2
REV. C
1k
10k
100k
1M
FREQUENCY – Hz
10M
100M
TPC 12. Power Supply Rejection vs. Frequency
–5–
PHASE MARGIN – Degrees
INPUT BIAS CURRENT – A
AD828
AD828
–40
140
VIN = 1V p-p
GAIN = +2
HARMONIC DISTORTION – dB
–50
CMR – dB
120
100
80
–60
–70
–80
2ND HARMONIC
–90
3RD HARMONIC
–100
100
60
1k
10k
100k
FREQUENCY – Hz
10M
1M
10k
100k
FREQUENCY – Hz
1M
10M
TPC 16. Harmonic Distortion vs. Frequency
TPC 13. Common-Mode Rejection vs. Frequency
50
Hz
30
RL = 1k
INPUT VOLTAGE NOISE – nV/
OUTPUT VOLTAGE – V p-p
1k
20
RL = 150
10
40
30
20
10
0
0
100k
1M
10M
FREQUENCY – Hz
100M
TPC 14. Large Signal Frequency Response
0
10
100
1k
10k
FREQUENCY – Hz
100k
1M
10M
TPC 17. Input Voltage Noise Spectral Density vs.
Frequency
10
650
6
550
4
1%
0.1%
SLEW RATE – V/s
OUTPUT SWING FROM 0 TO V
8
0.01%
2
0
2
1%
0.1%
0.01%
4
450
350
6
8
10
0
20
40
60
80
100
SETTLING TIME ns
120
140
250
–60
160
–40
–20
0
20
40
60
80
TEMPERATURE – C
100
120
140
TPC 18. Slew Rate vs. Temperature
TPC 15. Output Swing and Error vs. Settling Time
–6–
REV. C
AD828
5
10
6
1k
VOUT
AD828
4
VIN
2
GAIN – dB
1k
VS
15V
5V
+5V
150
1k
3
2
VS
15V
5V
+5V
1k
VOUT
VIN
AD828
0
VS = +5V
VS = 15V
1
0
–1
–2
–4
VS = 5V
VS = 5V
–6
–3
–8
–4
–10
100k
1M
10M
FREQUENCY – Hz
1M
10M
FREQUENCY – Hz
100M
TPC 22. Closed-Loop Gain vs. Frequency, G = –1
0.02
DIFF GAIN
0.01
0.06
1.0
0.8
0.6
0.4
GAIN – dB
0.03
DIFFERENTIAL GAIN – Percent
TPC 19. Closed-Loop Gain vs. Frequency
DIFFERENTIAL PHASE – Degrees
VS = +5V
–5
100k
100M
0.07
FLATNESS
50MHz
25MHz
19MHz
150
VS = 15V
–2
0.1dB
4
FLATNESS
40MHz
43MHz
18MHz
GAIN – dB
8
1pF
0.1dB
1pF
0.2
VS = 15V
0
–0.2
VS = 5V
–0.4
DIFF PHASE
0.05
–0.6
VS = 5V
–0.8
–1.0
100k
0.04
5
10
SUPPLY VOLTAGE – V
15
1M
10M
FREQUENCY – Hz
TPC 23. Gain Flatness Matching vs. Supply, G = +2
TPC 20. Differential Gain and Phase vs. Supply Voltage
–30
5V
–40
0.1F
VOUT
1F
–50
CROSSTALK – dB
100M
3
–60
–70
RL = 150
5
8
1/2
VIN
AD828
1/2
1
7
2
AD828
4
6
–80
RL
RL = 1k
–90
0.1F
RL
1F
–100
–110
10k
5V
100k
1M
FREQUENCY – Hz
10M
USE GROUND PLANE
PINOUT SHOWN IS FOR MINI-DIP PACKAGE
100M
TPC 21. Crosstalk vs. Frequency
REV. C
TPC 24. Crosstalk Test Circuit
–7–
AD828
CF
5V
50ns
1k
+VS
100
3.3F
90
0.01F
HP PULSE (LS)
VIN 1k
OR FUNCTION (SS)
GENERATOR
2
8
1/2
AD828
50
3
4
VOUT
1
0.01F
TEKTRONIX
P6201 FET
PROBE
TEKTRONIX
7A24
PREAMP
10
0%
RL
5V
3.3F
–VS
TPC 28. Inverter Large Signal Pulse Response 15 VS,
CF = 1 pF, RL = 1 kΩ
TPC 25. Inverting Amplifier Connection
2V
200mV
50ns
100
100
90
90
10
10
0%
0%
200mV
2V
TPC 29. Inverter Small Signal Pulse Response 15 VS,
CF = 1 pF, RL = 1500 Ω
TPC 26. Inverter Large Signal Pulse Response 5 VS,
CF = 1 pF, RL = 1 kΩ
200mV
10ns
10ns
200mV
100
100
90
90
10
10
0%
0%
200mV
10ns
200mV
TPC 27. Inverter Small Signal Pulse Response 5 VS,
CF = 1 pF, RL = 150 Ω
TPC 30. Inverter Small Signal Pulse Response 5 VS,
CF = 0 pF, RL = 150 Ω
–8–
REV. C
AD828
CF
5V
1k
50ns
1k
100
+VS
3.3F
90
0.01F
2
HP PULSE (LS)
OR FUNCTION (SS)
GENERATOR
8
1/2
AD828
RIN
VIN 100
3
4
VOUT
1
0.01F
50
TEKTRONIX
P6201 FET
PROBE
TEKTRONIX
7A24
PREAMP
10
0%
RL
5V
3.3F
–VS
TPC 31. Noninverting Amplifier Connection
1V
TPC 34. Noninverting Large Signal Pulse Response
15 VS, CF = 1 pF, RL = 1 kΩ
50ns
100mV
10ns
100
100
90
90
10
10
0%
0%
2V
200mV
TPC 32. Noninverting Large Signal Pulse Response
5 VS, CF = 1 pF, RL = 1 kΩ
100mV
TPC 35. Noninverting Small Signal Pulse Response
15 VS, CF = 1 pF, RL = 150 Ω
10ns
100mV
100
100
90
90
10
10
0%
0%
200mV
200mV
TPC 33. Noninverting Small Signal Pulse Response
5 VS, CF = 1 pF, RL = 150 Ω
REV. C
10ns
TPC 36. Noninverting Small Signal Pulse Response
5 VS, CF = 0 pF, RL = 150 Ω
–9–
AD828
THEORY OF OPERATION
Circuit Board Layout
The AD828 is a low cost, dual video operational amplifier
designed to excel in high performance, high output current
video applications.
Input and output runs should be laid out so as to physically
isolate them from remaining runs. In addition, the feedback
resistor of each amplifier should be placed away from the feedback resistor of the other amplifier, since this greatly reduces
interamp coupling.
The AD828 consists of a degenerated NPN differential pair
driving matched PNPs in a folded-cascade gain stage (Figure 4).
The output buffer stage employs emitter followers in a class AB
amplifier that delivers the necessary current to the load while
maintaining low levels of distortion.
The AD828 will drive terminated cables and capacitive loads of
10 pF or less. As the closed-loop gain is increased, the AD828
will drive heavier cap loads without oscillating.
+VS
Choosing Feedback and Gain Resistors
To prevent the stray capacitance present at each amplifier’s
summing junction from limiting its performance, the feedback
resistors should be ≤ 1 kΩ. Since the summing junction capacitance may cause peaking, a small capacitor (1 pF to 5 pF) may
be paralleled with RF to neutralize this effect. Finally, sockets
should be avoided, because of their tendency to increase interlead
capacitance.
Power Supply Bypassing
Proper power supply decoupling is critical to preserve the
integrity of high frequency signals. In carefully laid out designs,
decoupling capacitors should be placed in close proximity to
the supply pins, while their lead lengths should be kept to a
minimum. These measures greatly reduce undesired inductive
effects on the amplifier’s response.
OUTPUT
–IN
Though two 0.1 µF capacitors will typically be effective in
decoupling the supplies, several capacitors of different values
can be paralleled to cover a wider frequency range.
+IN
PARALLEL AMPS PROVIDE 100 mA TO LOAD
–VS
By taking advantage of the superior matching characteristics of the
AD828, enhanced performance can easily be achieved by employing the circuit in Figure 5. Here, two identical cells are paralleled
to obtain even higher load driving capability than that of a single
amplifier (100 mA min guaranteed). R1 and R2 are included to
limit current flow between amplifier outputs that would arise in
the presence of any residual mismatch.
Figure 4. Simplified Schematic
INPUT CONSIDERATIONS
An input protection resistor (RIN in TPC 31) is required in circuits
where the input to the AD828 will be subjected to transient or
continuous overload voltages exceeding the ± 6 V maximum differential limit. This resistor provides protection for the input
transistors by limiting their maximum base current.
1k
+VS
1F
For high performance circuits, the “balancing” resistor should be
used to reduce the offset errors caused by bias current flowing
through the input and feedback resistors. The balancing resistor
equals the parallel combination of RIN and RF and thus provides
a matched impedance at each input terminal. The offset voltage
error will then be reduced by more than an order of magnitude.
0.1F
1k
R1
5
8
2
1/2
AD828
1
3
VOUT
VIN
APPLYING THE AD828
The AD828 is a breakthrough dual amp that delivers precision and
speed at low cost with low power consumption. The AD828 offers
excellent static and dynamic matching characteristics, combined
with the ability to drive heavy resistive loads.
As with all high frequency circuits, care should be taken to maintain overall device performance as well as their matching. The
following items are presented as general design considerations.
R2
5
5
1/2
AD828
1k
6
4
RL
7
0.1F
1F
1k
–VS
Figure 5. Parallel Amp Configuration
–10–
REV. C
AD828
AIN
3
RZ
1/2
AD828
510
3
RZ
1/2
AD828
1
1
2
2
510
510
100FT
RG59A/U
RZ = 75
510
510
536
536
6
BOUT
BIN
510
7
6
1/2
AD828
1/2
AD828
5
AOUT
7
5
Figure 6. Bidirectional Transmission CKT
Full-Duplex Transmission
Superior load handling capability (50 mA min/amp), high
bandwidth, wide supply voltage range, and excellent crosstalk
rejection makes the AD828 an ideal choice for even the most
demanding high speed transmission applications.
The schematic below shows a pair of AD828s configured to
drive 100 feet of coaxial cable in a full-duplex fashion.
Two different NTSC video signals are simultaneously applied at
AIN and BIN and are recovered at AOUT and BOUT, respectively.
This situation is illustrated in Figures 7 and 8. These pictures
clearly show that each input signal appears undisturbed at its output, while the unwanted signal is eliminated at either receiver.
The transmitters operate as followers, while the receivers’ gain
is chosen to take full advantage of the AD828’s unparalleled
CMRR. In practice, this gain is adjusted slightly from its
theoretical value to compensate for cable nonidealities and losses.
R Z is chosen to match the characteristic impedance of the
cable employed.
Finally, although a coaxial cable was used, the same topology
applies unmodified to a variety of cables (such as twisted pairs
often used in telephony).
500mV
500mV
100
AIN
100
90
90
BIN
BOUT
AOUT
10
10
0%
0%
500mV
10µs
500mV
Figure 7. A Transmission/B Reception
10µs
Figure 8. B Transmission/A Reception
A High Performance Video Line Driver
+15V
The buffer circuit shown in Figure 9 will drive a back-terminated
75 Ω video line to standard video levels (1 V p-p) with 0.1 dB
gain flatness to 40 MHz with only 0.05° and 0.01% differential
phase and gain at the 3.58 MHz NTSC subcarrier frequency.
This level of performance, which meets the requirements for
high definition video displays and test equipment, is achieved
using only 7 mA quiescent current/amplifier.
0.1F
VIN
3
RT
75
1.0F
8
1/2
AD828
75
1
R BT
75
2
4
–15V
0.1F
1.0F
1k
1k
Figure 9. Video Line Driver
REV. C
–11–
RT
75
AD828
LOW DISTORTION LINE DRIVER
1.1k
The AD828 can quickly be turned into a powerful, low distortion line driver (see Figure 10). In this arrangement, the AD828
can comfortably drive a 75 Ω back-terminated cable with a
5 MHz, 2 V p-p input, while achieving the harmonic distortion
performance outlined in the following table.
+VS
1k
1F
0.1F
2
8
Configuration
2nd Harmonic
AD828
1
3
1. No Load
2. 150 Ω RL Only
3. 150 Ω RL 7.5 Ω RC
–78.5 dBm
–63.8 dBm
–70.4 dBm
C00879–0–6/02(C)
1/2
RC
7.5
1k
1k
6
In this application, one half of the AD828 operates at a gain of +2.1
and supplies the current to the load, while the other provides the
overall system gain of +2. This is important for two reasons: the
first is to keep the bandwidth of both amplifiers the same, and
the second is to preserve the AD828’s ability to operate from low
supply voltage. RC varies with the load and must be chosen to
satisfy the following equation:
1/2
VIN
AD828
4
5
75
75
RL
7
75
1F
0.1F
–VS
Figure 10. Low Distortion Amplifier
RC = MRL
where M is defined by [(M + 1) GS = GD] and GD = Driver’s
Gain, GS = System Gain.
OUTLINE DIMENSIONS
8-Lead Plastic Dual-in-Line Package [PDIP]
(N-8)
8-Lead Standard Small Outline Package [SOIC]
(R-8)
Dimensions shown in inches and (millimeters)
Dimensions shown in millimeters and (inches)
5.00 (0.1968)
4.80 (0.1890)
0.4299 (10.92)
0.3480 (8.84)
5
1
0.2799 (7.11)
0.2402 (6.10)
4
PIN 1
0.0598 (1.52)
0.0150 (0.38)
0.2098
(5.33)
MAX
0.1299
(3.30)
MIN
0.1598 (4.06)
0.1154 (2.93)
0.0697 (1.77)
0.0453 (1.15)
8
5
1
4
6.20 (0.2440)
5.80 (0.2284)
PIN 1
0.3248 (8.25)
0.3000 (7.62)
0.1000 (2.54)
BSC
0.0220 (0.56)
0.0142 (0.36)
0.1574 (4.00)
0.1497 (3.80)
0.50 (0.0196)
45
0.25 (0.0099)
1.27 (0.0500)
BSC
COPLANARITY
0.25 (0.0098)
0.10 (0.0040)
0.1949 (4.95)
0.1154 (2.93)
0.0150 (0.38)
0.0079 (0.20)
SEATING
PLANE
SEATING
PLANE
1.75 (0.0688)
1.35 (0.0532)
0.51 (0.0201)
0.33 (0.0130)
8
0.25 (0.0098) 0 1.27 (0.0500)
0.41 (0.0160)
0.19 (0.0075)
PRINTED IN U.S.A.
8
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
COMPLIANT TO JEDEC STANDARDS MS-012 AA
Revision History
Location
Page
6/02–Data Sheet changed from REV. B to REV. C.
Renumbered Figures and TPCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Global
Changes to Figure 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
–12–
REV. C