Series AM1DS-NZ 1 Watt | DC-DC Converter FEATURES: RoHS compliant High efficiency up to 82% Low profile plastic package 7 pin SIP package Operating temperature -40°C to + 85°C Continuous short circuit protection Pin compatible with multiple manufacturers Up to 3000VDC Isolation Models Single output Input Voltage (V) Output Voltage (V) AM1DS-0303S-NZ AM1DS-0305S-NZ AM1DS-0505S-NZ AM1DS-0509S-NZ AM1DS-0512S-NZ AM1DS-0515S-NZ AM1DS-0524S-NZ AM1DS-1205S-NZ AM1DS-1209S-NZ AM1DS-1212S-NZ AM1DS-1215S-NZ AM1DS-1515S-NZ AM1DS-2403S-NZ AM1DS-2405S-NZ AM1DS-2412S-NZ AM1DS-2415S-NZ 3.0-3.6 3.0-3.6 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 5 9 12 15 24 5 9 12 15 15 3.3 5 12 15 AM1DS-0305SH30-NZ AM1DS-0505SH30-NZ AM1DS-0512SH30-NZ AM1DS-0515SH30-NZ AM1DS-0524SH30-NZ AM1DS-1205SH30-NZ AM1DS-1212SH30-NZ AM1DS-1215SH30-NZ AM1DS-2405SH30-NZ AM1DS-2412SH30-NZ AM1DS-2415SH30-NZ 3.0-3.6 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 5 5 12 15 24 5 12 15 5 12 15 Input Voltage (V) Output Voltage (V) 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 ±5 ±9 ±12 ±15 ±24 ±5 ±12 ±15 ±5 ±12 ±15 4.5-5.5 4.5-5.5 ±5 ±12 Model Output Current max (mA) Isolation (VDC) Efficiency (%) 303 200 200 112 83 67 42 200 112 83 67 67 303 200 83 67 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 78 79 80 80 81 81 81 80 80 81 81 80 79 79 81 82 200 200 83 67 42 200 83 67 200 83 67 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 79 80 80 81 81 80 81 81 79 81 82 Isolation (VDC) Efficiency (%) ±100 ±56 ±42 ±34 ±21 ±100 ±42 ±34 ±100 ±42 ±34 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 80 80 80 81 81 80 81 81 79 81 82 ±100 ±42 3000 3000 80 80 Models Dual output Model AM1DS-0505D-NZ AM1DS-0509D-NZ AM1DS-0512D-NZ AM1DS-0515D-NZ AM1DS-0524D-NZ AM1DS-1205D-NZ AM1DS-1212D-NZ AM1DS-1215D-NZ AM1DS-2405D-NZ AM1DS-2412D-NZ AM1DS-2415D-NZ AM1DS-0505DH30-NZ AM1DS-0512DH30-NZ www.aimtec.com F 051e R12.C Output Current max (Ma) Tel: +1 514 620 2722 1 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-NZ 1 Watt | DC-DC Converter Models Dual output (continued) Model Input Voltage (V) Output Voltage (V) Output Current max (Ma) Isolation (VDC) Efficiency (%) AM1DS-0515DH30-NZ 4.5-5.5 ±15 ±34 3000 81 AM1DS-0524DH30-NZ 4.5-5.5 ±24 ±21 3000 81 AM1DS-1205DH30-NZ 4.5-5.5 ±5 ±100 3000 81 AM1DS-1212DH30-NZ 10.8-13.2 ±12 ±42 3000 81 AM1DS-1215DH30-NZ 10.8-13.2 ±15 ±34 3000 79 AM1DS-2405DH30-NZ 21.6-26.4 ±5 ±100 3000 81 AM1DS-2412DH30-NZ 21.6-26.4 ±12 ±42 3000 81 AM1DS-2415DH30-NZ 21.6-26.4 ±15 ±34 3000 82 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Nominal Typical 3.3 5 12 15 24 Filter Absolute Maximum Rating Maximum Units 3.0-3.6 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 Capacitor VDC 3.3 5 12 15 24 7 9 18 21 30 1 50 Peak Input Voltage time No Load Input Current VDC s mA Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 60 sec Rated Units 1500, 3000 VDC MOhm pF > 1000 20 Output Specifications Parameters Voltage accuracy Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise Conditions Typical Maximum ±5 Continuous Auto recovery ±1.2 15% ±0.03 For 1.0% change of Vin load 10~100% 20MHz Bandwidth Units % % of Vin % %/oC (output 3.3/5/12) 30 (output 15/24) 60 mV p-p 10 % of Max Minimum Load Current General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Derating Cooling www.aimtec.com F 051e R12.C Conditions 100% load Typical Maximum 100 - 300 -40 to +85 -55 to +125 100 Not-Required Free air convection Tel: +1 514 620 2722 2 of 3 Units KHz o C o C o C %/ oC Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-NZ 1 Watt | DC-DC Converter General Specifications (continued) Parameters Conditions Humidity Case material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Typical Maximum Units 95 Non-conductive black plastic (UL94V-0 rated) 2.3 0.77 x 0.24 x 0.37 inches 19.5 x 6.00 x 9.35 mm >3,450,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) 1.5 mm from case for 10sec 300 % RH g o C Pin Out Specifications Pin 1500 VDC Single + V Input - V Input - V Output No pin + V Output No pin 1 2 4 5 6 7 3000VDC Dual + V Input - V Input - V Output Common + V Output No pin Single + V Input - V Input No pin - V Output No pin + V Output Dual + V Input - V Input No pin - V Output Common + V Output Dimensions 19.50 (0.76) 6.00 (0.24) PRINTED FACE 9.30 (0.36) 0.30 (0.02) 6.00 (0.24) 9.30 (0.36) 4.10 (0.16) 2.54 (0.10) 15.20 (0.60) 0.50 (0.02) 0.50 (0.02) NOTE: Unit:mm [inch] Pin tolerances: 0.10mm [ 0.004inch] General tolerances: 0.25mm [ 0.010inch] 0.25 (0.01) 1.50 (0.06) NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.C Tel: +1 514 620 2722 3 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only