Series AMEPR3/4-KZ up to 700mA | AC-DC LED driver FEATURES: • • • • AC-DC Constant Current LED Driver Universal Input: 90-264VAC, 47-63Hz Short circuit protection RoHS compliant • • • • Waterproof IP67 Over current protection Over voltage protection Low output Ripple Models Single output Model Max Output Power (W) * Output Voltage Range (V) Output Current (mA) Input Voltage (VAC/Hz) Efficiency (%) 4 2.9 2 - 12 2-4 300 ±30 700 ±30 90-264/ 47-63 90-264/ 47-63 60 60 AMEPR4-1230KZ AMEPR3-0470KZ * Exceeding the maximum output power will permanently damage the converter NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Conditions Typical 115V 220V 230V 115V 220V 90-264 10 20 0.25 0.01 0.03 0.7 Voltage range Inrush current <2ms Leakage current AC current No-load consumption External fuse Maximum Units VAC A mA A W 250V/1.5A Output Specifications Parameters Current accuracy Line regulation Load regulation Ripple & Noise Hold-up time (min) Conditions Typical Maximum Units LL-HL 2V to 100% load 20MHz Bandwidth 100% load ±10 ±5 ±10 100 3 5 % % % mV p-p ms Conditions Typical Maximum Units 5mA/60s 1500 1500 1500 Conditions Typical Isolation Specifications Parameters Tested I/O voltage Input FG Output FG VAC VAC VAC General Specifications Parameters Maximum Units Switching frequency Over current protection Over voltage protection Short circuit protection Operating temperature * Temperature Rise Storage temperature Temperature coefficient Cooling Humidity Case material 95 ABS (Acrylonitrile-Butadiene-Styrene Co-polymers) www.aimtec.com Tel: +1 514 620 2722 F 052.1e R1.D 100 115 Zener Diode Clamp Auto-Recovery -30 to +55 25 -40 to +80 0.05 Free Air Convection 1 of 2 KHz % o C C o C % / oC o % RH Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEPR3/4-KZ up to 700mA | AC-DC LED driver General Specifications (continued) Parameters Conditions Weight Dimensions (L X H X W) Switching frequency MTBF Typical Maximum Units 45 2.05 x 0.87 x 1.02 inches 52.00 x 22.00 x 26.00 mm 100 30 000 hrs (MIL-HDBK-217 F at +25 oC) g KHz * NOTE: Converters do not have Over Temperature Protection and will be damaged if their maximum case temperature is exceeded. Safety Specifications Parameters Standards Designed to meet GB195110.1-2004/IEC61347-1:2003, EN55015, EN61000, EN61547 22.00 (0.87) 2 (0.08) 22.00 (0.87) 26.00 (1.02) 10.4 (0.41) Dimensions NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 052.1e R1.D Tel: +1 514 620 2722 2 of 2 Toll free: + 1 888 9 AIMTEC (924 6832) North America only