1200V APT60D120B APT60D120BG* ® 60A APT60D120S APT60D120SG* *G Denotes RoHS Compliant, Pb Free Terminal Finish. ULTRAFAST SOFT RECOVERY RECTIFIER DIODE TO PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Anti-Parallel Diode -Switchmode Power Supply -Inverters • Free Wheeling Diode -Motor Controllers -Converters -Inverters • Snubber Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • PFC 7 D3PAK 1 2 • Cooler Operation • Popular TO-247 Package or Surface Mount D3PAK Package • Higher Reliability Systems • Low Forward Voltage • Low Leakage Current -2 4 2 1 2 1 • Increased System Power Density 1 - Cathode 2 - Anode Back of Case - Cathode MAXIMUM RATINGS Symbol VR All Ratings: TC = 25°C unless otherwise specified. Characteristic / Test Conditions Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 126°C, Duty Cycle = 0.5) IFSM TJ,TSTG TL UNIT 1200 Volts Maximum D.C. Reverse Voltage VRRM IF(RMS) APT60D120B(G)_S(G) 60 RMS Forward Current (Square wave, 50% duty) 115 Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) 540 Amps -55 to 175 Operating and StorageTemperature Range °C 300 Lead Temperature for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V MIN TYP MAX IF = 60A 2.0 2.5 IF = 120A 2.3 IF = 60A, TJ = 125°C 1.8 Volts VR = VR Rated 250 VR = VR Rated, TJ = 125°C 500 APT Website - http://www.advancedpower.com 60 UNIT µA pF 4-2005 VF Characteristic / Test Conditions 053-0011 Rev E Symbol DYNAMIC CHARACTERISTICS Symbol APT60D120B(G)_S(G) Characteristic Test Conditions trr Reverse Recovery Time trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C Reverse Recovery Time Qrr Reverse Recovery Charge IF = 60A, diF/dt = -200A/µs Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM VR = 800V, TC = 25°C Maximum Reverse Recovery Current trr IRRM IF = 60A, diF/dt = -200A/µs VR = 800V, TC = 125°C IF = 60A, diF/dt = -1000A/µs Maximum Reverse Recovery Current VR = 800V, TC = 125°C MIN TYP MAX UNIT - 38 - 400 - 1200 - 6 - 470 ns - 4000 nC - 13 - 200 ns - 6200 nC - 47 Amps MIN TYP ns nC - - Amps Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions MAX RθJC Junction-to-Case Thermal Resistance .31 RθJA Junction-to-Ambient Thermal Resistance 40 WT Torque Package Weight oz 5.9 g 10 lb•in 1.1 N•m APT Reserves the right to change, without notice, the specifications and information contained herein. 0.9 0.25 0.7 0.20 0.10 0.3 0.05 0.1 0.05 0 Note: 0.5 PDM Z JC, THERMAL IMPEDANCE (°C/W) θ 0.35 0.15 t2 10 Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC SINGLE PULSE 10 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION -4 RC MODEL 4-2005 Junction temp (°C) 053-0011 Rev E t1 t -5 Power (watts) 0.0225 °C/W 0.00436 J/°C 0.123 °C/W 0.0115 J/°C 0.165 °C/W 0.117 J/°C Case temperature (°C) FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL °C/W 0.22 Maximum Mounting Torque 0.30 UNIT TYPICAL PERFORMANCE CURVES 200 140 TJ = 150°C 100 80 TJ = 25°C TJ = 125°C 60 40 TJ = -55°C 20 0 0 0.5 1 1.5 2 2.5 3 3.5 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage Qrr, REVERSE RECOVERY CHARGE (nC) 9000 T = 125°C J V = 800V 8000 R 120A 7000 6000 60A 5000 4000 3000 30A 2000 1000 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change trr, REVERSE RECOVERY TIME (ns) 160 60A 300 30A 200 100 50 T = 125°C J V = 800V R 120A 40 30 60A 20 30A 10 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change trr 0.8 Qrr 0.6 0.4 trr Duty cycle = 0.5 T = 175°C J 120 Qrr IRRM R 0 100 IF(AV) (A) Kf, DYNAMIC PARAMETERS (Normalized to 1000A/µs) 400 140 1.0 80 60 40 20 0.2 0.0 500 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change 1.4 1.2 T = 125°C J V = 800V 120A 0 IRRM, REVERSE RECOVERY CURRENT (A) IF, FORWARD CURRENT (A) 180 120 APT60D120B(G)_S(G) 600 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 0 25 50 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 500 400 4-2005 300 200 100 0 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 053-0011 Rev E CJ, JUNCTION CAPACITANCE (pF) 600 APT60D120B(G)_S(G) Vr diF /dt Adjust +18V APT10035LLL 0V D.U.T. 30µH trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 2 diF /dt - Rate of Diode Current Change Through Zero Crossing. 3 IRRM - Maximum Reverse Recovery Current. 4 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. 5 1 4 Zero 5 0.25 IRRM 3 2 Qrr - Area Under the Curve Defined by IRRM and trr. Figure 10, Diode Reverse Recovery Waveform and Definitions 3 D PAK Package Outline TO-247 Package Outline 15.49 (.610) 16.26 (.640) 6.15 (.242) BSC 5.38 (.212) 6.20 (.244) 4.90 (.193) 5.10 (.201) 1.45 (.057) 1.60 (.063) 20.80 (.819) 21.46 (.845) Cathode 4-2005 053-0011 Rev E e3 100% Sn Cathode (Heat Sink) e1 SAC: Tin, Silver, Copper 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 0.40 (.016) 0.65 (.026) 4.50 (.177) Max. 19.81 (.780) 20.32 (.800) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) 1.00 (.039) 1.15(.045) 12.40 (.488) 12.70 (.500) 0.020 (.001) 0.250 (.010) 2.70 (.106) 2.90 (.114) 1.15 (.045) 1.45 (.057) 1.20 (.047) 1.90 (.075) 1.40 (.055) 2.10 (.083) 5.45 (.215) BSC (2 Plcs.) Anode 2.21 (.087) 2.59 (.102) 13.30 (.524) 13.60(.535) 18.70 (.736) 19.10 (.752) 3.50 (.138) 3.81 (.150) 0.40 (.016) 0.79 (.031) 15.85 (.624) 16.05(.632) Cathode 10.90 (.430) BSC Dimensions in Millimeters and (Inches) 2.40 (.094) 2.70 (.106) (Base of Lead) Heat Sink (Cathode) and Leads are Plated Anode Cathode Dimensions in Millimeters (Inches) APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.