PRELIMINARY SPMT6678-01 SOLID STATE DEVICES, INC. 14005 Stage Road * Santa Fe Springs, Ca 90670 Phone: (562) 404-4474 * Fax: (562) 404-1773 90 AMP 450 VOLTS NPN TRANSISTOR POWER MODULE DESIGNER'S DATA SHEET FEATURES: • High Current Switching for Motor Drives and Inverters for Aerospace Applications. • Low Saturation Voltage at High Current. • Low Mechanical Stress Design. • Hermetic Construction for Aerospace Applications. • Excellent Thermal Management. • Full Power Screened Hermetic Discretes. • TX, TXV, and S-Level Screening Available. ASPM SYMBOL VALUE UNITS Collector - Emitter Voltage VCEO 450 Volts Collector - Base Voltage V CBO 525 Volts Emitter - Base Voltage V EBO 8 Volts Collector Current IC 90 Amps Base Current IB 20 Amps Emitter - Base Avalanche Energy EEBOaval 52 :J Emitter - Base Avalanche Power PEBOaval 1 W 1 JB 0.25 TB and TSTG -55 to 150 PD 400 4 MAXIMUM RATINGS Thermal Resistance, Junction to Base Operating and Storage Temperature Total Module Power Dissipation @ TB = 50oC 1/ Power Derating Above 100oC 1/ Subject to SOA Curves. Contact SSDI for Details. ELECTRICAL SCHEMATIC NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0004B o C/W o C W W/oC PRELIMINARY SPMT6678-01 SOLID STATE DEVICES, INC. 14005 Stage Road * Santa Fe Springs, Ca 90670 Phone: (562) 404-4474 * Fax: (562) 404-1773 ELECTRICAL CHARACTERISTICS Collector Cutoff Current (VCE = 525V, VBE = -2V) Emitter Cutoff Current (VEB = 8V) DC Current Gain (IC = 40A, VBE = -2V) Collector - Emitter Saturation Voltage (IC = 40A, IB = 3.33A) Base - Emitter Saturation Voltage (IC = 40A, IB = 6.0A) Switch Time (VCC = 300V, IC = 40A, IB1 = IB2 = 6A, TB = 85EC) TB = 25EC TB = 125EC TB = 25EC TB = 85EC TB = -55EC Turn On Time Storage Time Fall Time Insulation Resistance (All terminals to Base @1000V) *Pulse Test: Pulse Width = 300us, Duty Cycle = 2% CASE OUTLINE: ASPM Tolerances (Unless specified): .XX ".03 .XXX ".010 SYMBOL MIN MAX UNITS ICEV - 2.0 10.0 mAmps I EBO - 5.0 mAmps HFE 20.0 18.0 18.0 55 - - VCE(SAT) - 1.0 Volts VBE(SAT) - 1.5 Volts tON tS tF - 1.2 4.0 1.0 :sec RINSUL1 1 - GS