Revised September 2003 CD40106BC Hex Schmitt Trigger General Description Features The CD40106BC Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N and P-channel enhancement transistors. The positive and negative-going threshold voltages, VT+ and VT−, show low variation with respect to temperature (typ 0.0005V/°C at VDD = 10V), and hysteresis, VT+ − VT− ≥ 0.2 VDD is guaranteed. ■ Wide supply voltage range: All inputs are protected from damage due to static discharge by diode clamps to VDD and VSS. ■ Equivalent to MM74C14 3V to 15V ■ High noise immunity: 0.7 VDD (typ.) ■ Low power TTL compatibility: Fan out of 2 driving 74L or 1 driving 74LS ■ Hysteresis: 0.4 VDD (typ.), 0.2 VDD guaranteed Ordering Code: Order Number Package Number Package Description CD40106BCM M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow CD40106BCN N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Schematic Diagram Top View © 2003 Fairchild Semiconductor Corporation DS005985 www.fairchildsemi.com CD40106BC Hex Schmitt Trigger October 1987 CD40106BC Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 2) (Note 2) −0.5 to +18 VDC DC Supply Voltage (VDD) Input Voltage (VIN) DC Supply Voltage (VDD) −0.5 to VDD +0.5 VDC −65°C to +150°C Storage Temperature Range (TS) 700 mW Small Outline 500 mW −55°C to +125°C Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The table of “Recommended Operating Conditions” and “Electrical Characteristics” provides conditions for actual device operation. Lead Temperature (TL) Note 2: VSS = 0V unless otherwise specified. 260°C (Soldering, 10 seconds) 0 to VDD VDC Operating Temperature Range (TA) Power Dissipation (PD) Dual-In-Line 3 to 15 VDC Input Voltage (VIN) DC Electrical Characteristics (Note 3) Symbol IDD VOL Parameter Quiescent Device Current LOW Level Output Voltage VOH HIGH Level Output Voltage VT− VT+ VH IOL IOH IIN −55°C Conditions Min Max +25°C Min Typ +125°C Max Min Max VDD = 5V 1.0 1.0 30 VDD = 10V 2.0 2.0 60 VDD = 15V 4.0 4.0 120 VDD = 5V 0.05 0.05 0.05 VDD = 10V 0.05 0.05 0.05 VDD = 15V 0.05 0.05 0.05 V |IO| < 1 µA VDD = 5V 4.95 4.95 5 4.95 VDD = 10V 9.95 9.95 10 0.95 VDD = 15V 14.95 V 14.95 15 VDD = 5V, VO = 4.5V 0.7 2.0 0.7 1.4 2.0 0.7 2.0 Voltage VDD = 10V, VO = 9V 1.4 4.0 1.4 3.2 4.0 1.4 4.0 VDD = 15V, VO = 13.5V 2.1 6.0 2.1 5.0 6.0 2.1 6.0 Positive-Going Threshold VDD = 5V, VO = 0.5V 3.0 4.3 3.0 3.6 4.3 3.0 4.3 Voltage VDD = 10V, VO = 1V 6.0 8.6 6.0 6.8 8.6 6.0 8.6 VDD = 15V, VO = 1.5V 9.0 12.9 9.0 10.0 12.9 9.0 12.9 Hysteresis (VT+ − VT−) VDD = 5V 1.0 3.6 1.0 2.2 3.6 1.0 3.6 Voltage VDD = 10V 2.0 7.2 2.0 3.6 7.2 2.0 7.2 VDD = 15V 3.0 10.8 3.0 5.0 10.8 3.0 10.8 LOW Level Output VDD = 5V, VO = 0.4V 0.64 0.51 0.88 Current (Note 3) VDD = 10V, VO = 0.5V 1.6 1.3 2.25 0.9 VDD = 15V, VO = 1.5V 4.2 3.4 8.8 2.4 HIGH Level Output VDD = 5V, VO = 4.6V −0.64 −0.51 −0.88 −0.36 Current (Note 3) VDD = 10V, VO = 9.5V −1.6 −1.3 −2.25 −0.9 VDD = 15V, VO = 13.5V −4.2 −3.4 −8.8 −2.4 14.95 V V mA mA VDD = 15V, VIN = 0V −0.1 −10−5 −0.1 −1.0 0.1 10−5 0.1 1.0 2 V 0.36 VDD = 15V, VIN = 15V Note 3: IOH and IOL are tested one output at a time. www.fairchildsemi.com µA |IO| < 1 µA Negative-Going Threshold Input Current Units µA TA = 25°C, CL = 50 pF, RL = 200k, tr and tf = 20 ns, unless otherwise specified Symbol tPHL or tPLH tTHL or tTLH Typ Max Propagation Delay Time from Parameter VDD = 5V 220 400 Input to Output VDD = 10V 80 200 VDD = 15V 70 160 VDD = 5V 100 200 VDD = 10V 50 100 VDD = 15V 40 80 7.5 Transition Time Conditions Min CIN Average Input Capacitance Any Input 5 CPD Power Dissipation Capacity Any Gate (Note 5) 14 Units ns ns pF pF Note 4: AC Parameters are guaranteed by DC correlated testing. Note 5: CPD determines the no load ac power consumption of any CMOS device. For complete explanation see 74C Family Characteristics Application Note, AN-90. Switching Time Waveforms tr = tf = 20 ns Typical Applications Low Power Oscillator Note: The equations assume t1 + t2 >> tPHL + tPLH 3 www.fairchildsemi.com CD40106BC AC Electrical Characteristics (Note 4) CD40106BC Typical Performance Characteristics Typical Transfer Characteristics Guaranteed Trip Point Range Guaranteed www.fairchildsemi.com 4 CD40106BC Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A 5 www.fairchildsemi.com CD40106BC Hex Schmitt Trigger Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 6