UNISONIC TECHNOLOGIES CO., LTD BTC1510F3 Preliminary NPN SILICON TRANSISTOR NPN EPITAXIAL PLANAR TRANSISTOR DESCRIPTION As a NPN Darlington transistor the UTC BTC1510F3 is designed for general purpose amplifier and low speed switching application. FEATURES * Very high BVCEO * Very low VCE(SAT) * Very high current gain Lead-free: BTC1510F3L Halogen-free: BTC1510F3G ORDERING INFORMATION Normal BTC1510F3-TQ2-R BTC1510F3-TQ2-T Ordering Number Lead Free Halogen Free BTC1510F3L-TQ2-R BTC1510F3G-TQ2-R BTC1510F3L-TQ2-T BTC1510F3G-TQ2-T www.unisonic.com.tw Copyright © 2008 Unisonic Technologies Co., Ltd Package TO-263 TO-263 Pin Assignment 1 2 3 B C E B C E Packing Tape Reel Tube 1 of 3 QW-R223-002.a BTC1510F3 Preliminary NPN SILICON TRANSISTOR EQUIVALENT CIRCUIT UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R223-002.a BTC1510F3 Preliminary NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATING (Ta=25°C) PARAMETER Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage SYMBOL VCBO VCEO VEBO DC RATINGS 150 150 5 UNIT V V V 10 A 15 2 Collector Dissipation PD W 60 Junction Temperature TJ 150 ℃ Storage Temperature TSTG -55 ~ +150 ℃ Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Note: 1 .Absolute maximum ratings are stress ratings only and functional device operation is not implied. Note: 2. Pulse test: Pulse Width=100ms Collector Current Pulse(Note 2) Ta=25℃ TC=25℃ IC ELECTRICAL CHARACTERISTICS PARAMETER Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage SYMBOL BVCBO BVCEO Base-Emitter Turn-On Voltage (Note) VBE(ON) Collector Cutoff Current Collector Cutoff Current Emitter Cutoff Current ON CHARACTERISTICS VFEC ICBO ICEO IEBO TEST CONDITIONS IC=100µA, IE=0 IC=1mA, IB=0 VCE=3V, IC=5A VCE=3V, IC=10A IC=5A VCB=150V, IE=0 VCE=150V, IE=0 VEB=5V, IC=0 VCE=3V, IC=5A VCE=3V, IC=10A Base-Emitter Saturation Voltage(Note) VBE(SAT) IC=5A, IB=5mA IC=5A, IB=10mA Collector-Emitter Saturation Voltage VCE(SAT) IC=10A, IB=100mA (Note) IC=5A, IB=2.5mA Note: Pulse test: Pulse Width≦380μs, Duty Cycle≦2% DC Current Gain (Note) hFE MIN 150 150 2 100 TYP MAX UNIT V V 2.8 4.5 3 200 200 2 V µA µA mA 20 K 2 1.5 3 2 V V V UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R223-002.a