GHz LGA Socket - Direct mount, solderless Features A • Directly mounts to target PCB (needs tooling holes) with hardware • High speed, reliable Elastomer connection • Minimum real estate required • Compression plate distributes forces evenly • Ball guide prevents over compression of elastomer • Easily removable swivel socket lid A 15.225 17.500 B 1.075 alignment pin B 1.5875 target PCB Recommended torque is 1.5 in lb. SECTION B-B SCALE 3 : 1 8.254 1.905 3.925 customer's device customer's target PCB SECTION A-A Description: Socket for 0.6mm pitch LGA100 Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. SG-LGA-7001 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: Material <not specified> Finish: Weight: 5.50 STATUS: Released SHEET: 1 OF 4 REV. A ENG: E. Smolentseva DRAWN BY: M. Raske SCALE: 4:1 FILE: SG-LGA-7001 Dwg DATE: 01/06/2015 8.400 *Note: LGA pattern is not symmetrical with respect to the mounting holes. It is shifted by 0.25mm to the right of center. 0.30 0.60 3.950±0.0125 4.20±0.0125 4.450±0.0125 1.2825±0.025 0.60 0.47 0.250 DETAIL A SCALE 14 : 1 A 6.3625±0.0250 (x4) 4.200±0.0125 17.500 0.70 7.950 8.400 5.50±0.10 4.200±0.0125 0.35 (x100) pad 5.00±0.10 1.710±0.100 (x4) Non-plated mounting hole 0.850±0.025 (x2) Non-plated alignment hole 6.3625±0.0250 (X4) 3.8225±0.025 15.225 Body Size Target PCB Recommendations Total thickness: 1.6mm min. Plating: Gold or Solder finish PCB Pad height: Same or higher than solder mask Description: Recommended PCB Layout Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. SG-LGA-7001 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: Material <not specified> Finish: Weight: 5.50 STATUS: Released SHEET: 2 OF 4 REV. A ENG: E. Smolentseva DRAWN BY: M. Raske SCALE: 6.5:1 FILE: SG-LGA-7001 Dwg DATE: 01/06/2015 0.10 C (2x) 0.10 C 9.00 0.10 M C A B 0.08 C A B +0.040 0.010 - 0.010 A1 corner A1 5.00±0.10 Datum A 0.47 C 0.60 9.00 0.10 M C A B 5.50±0.10 Datum B 0.30 0.70 0.10 C (2x) 0.60 0.30±0.05 0.10 M C A B 0.05 M C SHEET: 3 OF 4 REV. A ENG: E. Smolentseva DRAWN BY: M. Raske SCALE: 7:1 FILE: SG-LGA-7001 Dwg DATE: 01/06/2015 0.85±0.05 0.30 Description: Compatible LGA Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. SG-LGA-7001 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: Material <not specified> Finish: Weight: 5.50 STATUS: Released 4 2 3 5 1 ITEM NO. Description Material 1 GHz Socket Base 10mm IC 3mm Thk 7075-T6 Aluminum Alloy 2 Socket Lid 7075-T6 Aluminum Alloy 3 Compression Plate 9.95 x 1.5mm 7075-T6 Aluminum Alloy 4 Compression Screw M6x1 Stainless Steel (18-8) 5 #0-80 Shoulder Screw, 0.062" thread length Stainless Steel (303) 6 Customer's target PCB FR4 7 8 Elast Gde 10x10mm 4.725mm Thk Alignment Pin 1/32" dia. x 1/8" lng Ultem Chrome Stainless Steel 9 Customer's device FR4 Standard 10 IC (MLF) Guide Torlon 4203 11 Nut, #0-80, SS Stainless Steel (18-8) 12 14 10 9 20 Micron dia gold plated brass 0.5mm thick, 0.05x 0.05mm pitch, filaments arranged symettrically in a 10mm sqr, Z-axis conductive angled silicon rubber (63.5 degree angle), elastomer Thickness: 0.5mm 13 Washer, #0 x .025", Nylon Nylon 6/6 14 #0-80 X .313 LG, SOC HD CAP SCREW, ALLOY STL, BLK OXIDE Alloy Steel 7 12 8 6 13 11 Description: Socket Specification Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. SG-LGA-7001 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: Material <not specified> Finish: Weight: 5.50 STATUS: Released SHEET: 4 OF 4 REV. A ENG: E. Smolentseva DRAWN BY: M. Raske SCALE: 3.75:1 FILE: SG-LGA-7001 Dwg DATE: 01/06/2015