66260 - Micropac Industries

66260
6 PIN GULL WING
PROTON RADIATION TOLERANT OPTOCOUPLER
OPTOELECTRONIC PRODUCTS
DIVISION
05/31/2013
Features:
Applications:










High Reliability
Base lead provided for conventional transistor
biasing
Rugged package
Stability over wide temperature
+1000 V electrical isolation
Eliminate ground loops
Level shifting
Line receiver
Switching power supplies
Motor control
DESCRIPTION
The 66260 is a single channel device electrically similar to the 4N48. This product has been designed to be more tolerant to
proton radiation. The 66260 optocoupler is packaged in a hermetically sealed 6 pin gull wing package. This device can be
supplied to customer specifications as well as tested and screened to the requirements of MIL-PRF-19500 up to space
(JANS) level.
ABSOLUTE MAXIMUM RATINGS
Input to Output Voltage .......................................................................................................................................................... 1 kV
Emitter-Base Voltage ............................................................................................................................................................... 7 V
Collector-Emitter Voltage (Value applies to emitter-base open-circuited & the input-diode equal to zero) ........................ 60 V
Collector-Base Voltage .......................................................................................................................................................... 60 V
Reverse Input Voltage ............................................................................................................................................................ 7 V
Input Diode Continuous Forward Current at (or below) 25°C Free-Air Temperature (see note 1) .................................. 50 mA
Peak Forward Input Current (Value applies for tw 1s, PRR < 300 pps) ............................................................................ 1 A
Continuous Collector Current ............................................................................................................................................. 50 mA
Continuous Transistor Power Dissipation at (or below) 25C Free-Air Temperature (see Note 2) ............................... 300 mW
Storage Temperature......................................................................................................................................... -65°C to +125°C
Operating Free-Air Temperature Range ............................................................................................................-55°C to +100°C
Lead Solder Temperature (10 seconds max.) .................................................................................................................. 240°C
Notes:
1. Derate linearly to 100°C free-air temperature at the rate of 0.67 mA/°C above 25°C.
2. Derate linearly to 100°C free-air temperature at the rate of 4 mW/°C above 25C.
Package Dimensions
Schematic Diagram
0.350±0.010
PIN 1
0.195
6X 0.015±0.002
6E
A1
0.130
4X 0.050
4C
0.046±0.010
5B
K3
26° NOM.
0.025
0.008 MAX.
0.010
ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED.
ALL TOLERANCES ARE ±0.005 UNLESS OTHERWISE NOTED.
A - ANODE
B - BASE
C - COLLECTOR
E - EMITTER
K - CATHODE
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION  725 E.Walnut St., Garland, TX 75040  (972)272-3571  Fax (972)487-6918
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM
66260
6 PIN GULL WING PROTON RADIATION TOLERANT OPTOCOUPLER
05/31/2013
ELECTRICAL CHARACTERISTICS
TA = 25C unless otherwise specified.
PARAMETER
SYMBOL
Input Diode Static Reverse Current
MIN
TYP
IR
MAX
UNITS
TEST CONDITIONS
100
µA
VR = 3 V
2.2
V
IF = 10 mA
2.0
V
IF = 10 mA
2.2
V
IF = 10 mA
MAX
UNITS
TEST CONDITIONS
Input Diode Static Forward Voltage
-55C
VF
1.0
Input Diode Static Forward Voltage
+25C
VF
0.8
VF
0.8
SYMBOL
MIN
Collector-Base Breakdown Voltage
V(BR)CBO
45
V
IC = 100 A, IB = 0, IF = 0
Collector-Emitter Breakdown Voltage
V(BR)CEO
40
V
IC = 1mA, IB = 0, IF = 0
Input Diode Static Forward Voltage

+100 C
1.8
NOTE
OUTPUT TRANSISTOR
TA = 25C unless otherwise specified.
PARAMETER
Off-State Collector Current
TYP
ICEO
+100C
100
nA
VCE = 20 V, IF = 0 mA, IB = 0
100
A
VCE = 20 V, IF = 0 mA, IB = 0
MAX
UNITS
TEST CONDITIONS
NOTE
COUPLED CHARACTERISTICS
TA = 25C unless otherwise specified.
PARAMETER
SYMBOL
MIN
On State Collector Current
On State Collector Current
+100C
On State Collector Current
-55C
TYP
NOTE
IC(ON)
1.0
mA
VCE = 5 V, IF = 1mA, IB = 0
IC(ON)
1.0
mA
VCE = 5.0 V, IF = 2 mA, IB = 0
IC(ON)
1.0
mA
VCE = 5 V, IF = 2 mA, IB = 0
V
IF = 2 mA, IC= 1 mA

VIN-OUT = 1000 V
1
pF
f = 1MHz, VIN-OUT = 1000 V
1
Collector-Emitter Saturation Voltage
VCE(SAT)
Input to Output Internal Resistance
RIO
Input to Output Capacitance
CIO
0.3
11
10
2.5
5
Rise Time-Phototransistor Operation
tr
5
10
s
Fall Time-Phototransistor Operation
tf
5
10
s
VCC = 10 V, IF = 10 mA,
RL = 100 , IB = 0
VCC = 10 V, IF = 10 mA,
RL = 100 , IB = 0
NOTES:
1.
These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together.
This parameter must be measured using pulse techniques (tW = 100 s duty cycle  1%).
RECOMMENDED OPERATING CONDITIONS:
PARAMETER
SYMBOL
MIN
MAX
UNITS
IFL
0
90
A
Input Current, High Level
IFH
1
10
mA
Supply Voltage
VCE
5
10
TA
-55
100
Input Current, Low Level
Operating Temperature
V

C
SELECTION GUIDE
PART NUMBER
PART DESCRIPTION
66260-001
Commercial
66260-101
Screened to JAN Level
66260-103
Screened to JANTX Level
66260-105
Screened to JANTXV Level
66260-300
Screened to JANS Level
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION  725 E.Walnut St., Garland, TX 75040  (972)272-3571  Fax (972)487-6918
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM