Model # LC8530 Preliminary Low Cost, Low Noise RF Amplifier Frequency Range: 1030 to 1090 MHz Features • Broad Bandwidth: 1030-1090 MHz • Low Cost Packaging • Low Noise Figure: 0.9 dB Model LC8530 is a high performance low cost amplifier covering the IFF 1030 to 1090 MHz band. This design utilizes a FET based active for superior low noise performance. This standard model may also be modified or customized in order to optimize any one particular parameter.) All specification ratings are based on measurements in a 50 Ω (ohm) system with a DC supply voltage tolerance of +/- 2%. Technical Specifications Maximum Ratings Parameter Unit Typical Min/Max Frequency Range MHz 1030 to 1090 1030 to 1090 Gain dB 26 Noise Figure (-15°C to -55°C ) dB Output Power @ 1 dB Compression Maximum (No Damage) Ratings Storage Temperature -55°C to +85°C 24 Operating Temperature -40°C to +85°C 0.9 1.2 DC Voltage @ 25°C +8 volts dBm 12 10 Input Drive @ 25°C (CW) +13 dBm Output 3rd Order Intercept dBm 25 - Output 2nd Order Intercept dBm 35 - Reverse Isolation dB -35 - Input VSWR --- 1.5:1 2.0:1 Output VSWR --- 1.5:1 2.0:1 Supply Voltage volts +5 +5 Supply Current mA 50 60 1030 MHz 1090 MHz 1030 MHz 1090 MHz 1030 MHz * Typical values are measured at 25°C, but not guaranteed. 1090 MHz 1030 MHz 1090 MHz Parameter Specification Specification Temperatures (Min/Max) -40°C to +85°C Housing Size 0.500” L x 0.500” W x 0.300” H Housing Drawing LC1 1030 MHz 1090 MHz 1030 MHz 1090 MHz Rev Date: 4/8/2015 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]