Model # BXHF1227 Preliminary High Frequency Microwave Amplifier Frequency Range: 2-18 GHz Features • Laser Sealed Housing • No External Circuitry Needed • RoHS Compliant Model Available • Unconditionally Stable • EAR99 Model BXHF1227 is a high frequency amplifier covering 2-18 GHz. This design utilizes a laser sealed housing for superior environmental protection. All specification ratings are based on measurements in a 50 Ω (ohm) system with a DC supply voltage tolerance of +/- 2%. Typical Intermodulation Performance at 25 ºC Technical Specifications Parameter Unit Typical Min/Max Frequency Range GHz 2 to 18 2 to 18 dB 19 17 (Min), 21 (Max) dB 3.5 5.0 dBm 25 23 Reverse Isolation dB -40 --- Input VSWR --- 1.5:1 2.0:1 Output VSWR --- 1.5:1 2.0:1 Supply Voltage volts +15 +15 Supply Current mA 450 500 Gain Noise Figure Output Power @ 1 dB Compression Third Order Two Tone Intercept Point: Note: Intercept Values Measured at 10 GHz. Absolute Maximum (No Damage) Ratings Mechanical & Electrical Parameter Specification Temperatures (Min/Max) Specification -20°C to +70°C Housing Size 0.870” L x 1.060” W x 0.300” H Housing Drawing HF2 Package RF Connectors SMA Female Replaceable Connectors Operating Temperature -55ºC to +100 ºC Storage Temperature -62ºC to +125ºC Case Temperature +125 ºC DC Voltage +18 Volts Continuous RF Input Power +13 dBm Short Term RF Input Power 200 Milliwatts (1 Minute Max.) Maximum Peak Power 0.5 Watt (3 µsec Max.) Rev Date: 12/3/2015 © API Technologies Corp. Proprietary Information +30 dBm (Typ.) Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]