Model # BX9887 (Preliminary) RF/Microwave Amplifier Frequency Range: 10 to 500 MHz Features • High Output Power • Laser Sealed Housing • No External Circuitry Needed • RoHS Compliant Model Available • Unconditionally Stable • EAR99 Model BX9887 is an RF amplifier covering 10 to 500 MHz. This design utilizes a laser sealed housing for superior environmental protection. All specification ratings are based on measurements in a 50 Ω (ohm) system with a DC supply voltage tolerance of +/- 2%. Typical Intermodulation Performance at 25 ºC Technical Specifications Parameter Unit Typical Min/Max Frequency Range MHz 10 to 500 10 to 500 dB 27 25 (Min), 29 (Max) dB 4.0 5.0 dBm 32 31 Reverse Isolation dB -40 --- Input VSWR --- 1.5:1 2.0:1 Output VSWR --- 1.5:1 2.0:1 Supply Voltage volts +15 +15 Supply Current mA 750 800 Gain Noise Figure* Output Power @ 1 dB Compression Specification Temperatures (Min/Max) -20°C to +70°C 1.75” L x 1.100” W x 0.52” H Housing Drawing SMA Connectorized Housing RF Connectors SMA Female Replaceable Connectors Second Order Two Tone Intercept Point: +63 dBm (Typ.) Third Order Two Tone Intercept Point: +45 dBm (Typ.) Absolute Maximum (No Damage) Ratings Specification Housing Size +68 dBm (Typ.) Note: Intercept Values Measured at 250 MHz. *NF below 50 MHz will be 2 dB higher. Mechanical & Electrical Parameter Second Order Harmonic Intercept Point: Operating Temperature -55ºC to +100 ºC Storage Temperature -62ºC to +125ºC Case Temperature +125 ºC DC Voltage +18 Volts Continuous RF Input Power +13 dBm Short Term RF Input Power 200 Milliwatts (1 Minute Max.) Maximum Peak Power 0.5 Watt (3 µsec Max.) Rev Date: 12/2/2015 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]