CGHV35060MP

PRELIMINARY
CGHV35060MP
60W, 2700-3500 MHz, 50V, GaN HEMT for S Band Radar and LTE base stations
Cree’s CGHV35060MP is a 60W input matched, gallium nitride (GaN) high
electron mobility transistor (HEMT) optimized for S Band performance.
The
CGHV35060MP is suitable for typical bands of 2.7-3.1GHz and 3.1-3.5GHz
while the input matched transistor provides optimal gain, power and efficiency
in a small 6.5mm x 4.4mm plastic surface mount (SMT) package.
The
typical performance plots in the datasheet are derived with CGHV35060MP
matched into a 3.1-3.5GHz high power amplifier.
PN: CGHV35
060M
P
Typical Performance Over 3.1 - 3.5 GHz
Parameter
(TC = 25˚C)
of Demonstration Amplifier
3.1 GHz
3.3 GHz
3.5 GHz
Units
14.5
14.3
13.8
dB
Output Power
88
88
75
W
Drain Efficiency
61
67
64
%
Gain
Note:
Measured in the CGHV35060MP-TB amplifier circuit, under 100 μs pulse width, 10% duty cycle, PIN = 35 dBm.
Features
• Reference design amplifier 3.1 - 3.5 GHz
• 75W Typical output power
• 14.5 dB power gain
2015
Rev 0 – April
• 67% Drain efficiency
• Internally pre-matched on input, unmatched output
Subject to change without notice.
www.cree.com/rf
1
Absolute Maximum Ratings (not simultaneous) at 25˚C Case Temperature
Parameter
Drain-Source Voltage
Symbol
Rating
Units
Conditions
VDSS
150
Volts
25˚C
25˚C
Gate-to-Source Voltage
VGS
-10, +2
Volts
Storage Temperature
TSTG
-65, +150
˚C
Operating Junction Temperature
TJ
225
˚C
Maximum Forward Gate Current
IGMAX
10.4
mA
25˚C
Maximum Drain Current1
IDMAX
6.3
A
25˚C
TS
245
˚C
Soldering Temperature2
CW Thermal Resistance, Junction to Case3
RθJC
2.6
˚C/W
85˚C, PDISS = 52 W
Pulsed Thermal Resistance, Junction to Case
RθJC
1.95
˚C/W
85˚C, PDISS = 62 W, 100 μsec 10%
TC
-40, +107
˚C
Case Operating Temperature4
Note:
1
Current limit for long term, reliable operation.
2
Refer to the Application Note on soldering at http://www.cree.com/rf/document-library
3
Measured for the CGHV35060MP
4
See also, the Power Dissipation De-rating Curve on Page 4.
Electrical Characteristics (TC = 25˚C)
Characteristics
Symbol
Min.
Typ.
Max.
Units
Gate Threshold Voltage
VGS(th)
-3.8
-3.0
-2.3
VDC
Gate Quiescent Voltage
Conditions
DC Characteristics1
VDS = 10 V, ID = 10.4 mA
VGS(Q)
–
-2.7
–
VDC
VDS = 50 V, ID = 125 mA
Saturated Drain Current2
IDS
8.4
10.4
–
A
VDS = 6.0 V, VGS = 2.0 V
Drain-Source Breakdown Voltage
VBR
150
–
–
VDC
VGS = -8 V, ID = 10.4 mA
RF Characteristics (TC = 25˚C, F0 = 3.3 GHz unless otherwise noted)
4
Saturated Output Power3
PSAT
–
75
–
W
VDD = 50 V, IDQ = 125 mA, PIN = 35 dBm
Pulsed Drain Efficiency3
η
–
67
–
%
VDD = 50 V, IDQ = 125 mA, PIN = 35 dBm
Gain
3
G
–
14.5
–
dB
VDD = 50 V, IDQ = 125 mA, PIN = 35 dBm
Gain5
G
–
17
–
dB
VDD = 50 V, IDQ = 125 mA, POUT = 41.5 dBm
ACLR
–
-35
–
dBc
VDD = 50 V, IDQ = 125 mA, POUT = 41.5 dBm
η
–
35
–
%
VDD = 50 V, IDQ = 125 mA, POUT = 41.5 dBm
VSWR
–
–
TBD
Y
No damage at all phase angles, VDD = 50 V, IDQ =
125 mA, POUT = 60 W Pulsed
CGS
–
32.16
–
pF
VDS = 50 V, Vgs = -8 V, f = 1 MHz
Output Capacitance
CDS
–
4.4
–
pF
VDS = 50 V, Vgs = -8 V, f = 1 MHz
Feedback Capacitance
CGD
–
0.5
–
pF
VDS = 50 V, Vgs = -8 V, f = 1 MHz
WCDMA Linearity5
Drain Efficiency5
Output Mismatch Stress3
Dynamic Characteristics
Input Capacitance6
6
Notes:
Measured on wafer prior to packaging.
2
Scaled from PCM data.
3
Pulse Width = 100 µs, Duty Cycle = 10%
4
Measured in CGHV35060MP-TB.
5
Single Carrier WCDMA, 3GPP Test Model 1, 64 DPCH, 45% Clipping, PAR = 7.5 dB @ 0.01% Probability on CCDF, VDD = 50 V.
6
Includes package.
1
Copyright © 2014 - 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
and the Cree logo are registered trademarks of Cree, Inc.
2
CGHV35060MP Rev 0
Cree, Inc.
4600 Silicon Drive
Durham, North Carolina, USA 27703
USA Tel: +1.919.313.5300
Fax: +1.919.869.2733
www.cree.com/rf
Typical Performance
Figure 1. - Small Signal Gain and Return Losses of the CGHV35060MP
CGHV35060MP
Measured in Demonstration
Amplifier
Circuit
CGHV35060MP-TB
35dBm pin,
10% 100us, Vd
50V, Id 125mA
20
15
Gain and Return Loss (dB)
10
5
0
-5
-10
S21
-15
S11
S22
-20
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
Frequency (GHz)
3.6
3.7
3.8
Figure 2. - Gain, Efficiency & Output Power for the CGHV35060MP at PIN = 35 dBm with
CGHV35060MP
100 μs/10% as Measured in Demonstration
Amplifier Circuit CGHV35060MP
35dBm pin, 10% 100us, Vd 50V, Id 125mA
Output Power (W), Gain (dB), & Efficiency (%)
100
Output Power
90
80
70
60
Efficiency
50
40
30
20
Output Power(W)
Gain (dB)
Efficiency (%)
Gain
10
0
3.05
Gain
3.10
3.15
3.20
3.25
3.30
3.35
Frequency (GHz)
3.40
3.45
3.50
Copyright © 2014 - 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
and the Cree logo are registered trademarks of Cree, Inc.
3
CGHV35060MP Rev 0
3.55
Cree, Inc.
4600 Silicon Drive
Durham, North Carolina, USA 27703
USA Tel: +1.919.313.5300
Fax: +1.919.869.2733
www.cree.com/rf
CGHV35060MP Power Dissipation De-rating Curve
Power dissipation derating curve vs. Max Tcase
Pulsed (100 uS/ 10% duty)
100
90
80
Power dissipation (W)
70
60
50
Note 1
40
30
20
Pulse 100uS / 10%
10
0
0
50
100
150
200
250
Case Temperature (C)
Note 1. Area exceeds Maximum Case Temperature (See Page 2).
Copyright © 2014 - 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
and the Cree logo are registered trademarks of Cree, Inc.
4
CGHV35060MP Rev 0
Cree, Inc.
4600 Silicon Drive
Durham, North Carolina, USA 27703
USA Tel: +1.919.313.5300
Fax: +1.919.869.2733
www.cree.com/rf
Part Number System
CGHV35060MP
Plastic Overmold
Power Output (W)
Upper Frequency (GHz)
Cree GaN High Voltage
Parameter
Value
Units
Upper Frequency
3.5
GHz
Power Output
60
W
Package
MP
-
1
Table 1.
Note : Alpha characters used in frequency
1
code indicate a value greater than 9.9 GHz.
See Table 2 for value.
Character Code
Code Value
A
0
B
1
C
2
D
3
E
4
F
5
G
6
H
7
J
8
K
9
Examples:
1A = 10.0 GHz
2H = 27.0 GHz
Table 2.
Copyright © 2014 - 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
and the Cree logo are registered trademarks of Cree, Inc.
5
CGHV35060MP Rev 0
Cree, Inc.
4600 Silicon Drive
Durham, North Carolina, USA 27703
USA Tel: +1.919.313.5300
Fax: +1.919.869.2733
www.cree.com/rf
Disclaimer
Specifications are subject to change without notice. Cree, Inc. believes the information contained within this data sheet
to be accurate and reliable. However, no responsibility is assumed by Cree for any infringement of patents or other
rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent
or patent rights of Cree. Cree makes no warranty, representation or guarantee regarding the suitability of its products
for any particular purpose. “Typical” parameters are the average values expected by Cree in large quantities and are
provided for information purposes only. These values can and do vary in different applications and actual performance
can vary over time. All operating parameters should be validated by customer’s technical experts for each application.
Cree products are not designed, intended or authorized for use as components in applications intended for surgical
implant into the body or to support or sustain life, in applications in which the failure of the Cree product could result
in personal injury or death or in applications for planning, construction, maintenance or direct operation of a nuclear
facility.
For more information, please contact:
Cree, Inc.
4600 Silicon Drive
Durham, North Carolina, USA 27703
www.cree.com/rf
Sarah Miller
Marketing & Export
Cree, RF Components
1.919.407.5302
Ryan Baker
Marketing
Cree, RF Components
1.919.407.7816
Tom Dekker
Sales Director
Cree, RF Components
1.919.407.5639
Copyright © 2014 - 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
and the Cree logo are registered trademarks of Cree, Inc.
6
CGHV35060MP Rev 0
Cree, Inc.
4600 Silicon Drive
Durham, North Carolina, USA 27703
USA Tel: +1.919.313.5300
Fax: +1.919.869.2733
www.cree.com/rf