POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation PHASE CONTROL MODULE *Full ermetic packaging *Industrial compatible packaging *Insulation using Aln substrate *New G-K auxiliary output arrangement *Contact screws avaliable on request POSEICO SPA Via N. Lorenzi 8, 16152 Genova - ITALY Tel. ++ 39 010 6556234 - Fax ++ 39 010 6557519 Sales Office: Tel. ++ 39 010 6556775 - Fax ++ 39 010 6442510 ATD571, ADT571 Repetitive voltage up to Mean on-state current Surge current 1600 V 570 A 14.5 kA FINAL SPECIFICATION mar 01 - ISSUE : 01 Symbol Characteristic Tj [°C] Conditions Value Unit BLOCKING V RRM / DRM Repetitive peak reverse/off-state voltage 135 1600 V V RSM Non-repetitive peak reverse voltage 135 1700 I RRM / DRM Repetitive peak reverse/off-state current 135 50 mA V I T (AV) Mean on-state current 180° sin, 50Hz, Tc=91°C 570 A I T (AV) Mean on-state current 180° sin. 50Hz, Tc=55°C 875 A I TSM CONDUCTING Surge on-state current sine wave, 10 ms I² t I² t without reverse voltage V T On-state voltage On-state current = V T(TO) Threshold voltage 135 1.0 T On-state slope resistance 135 0.380 mohm From 75% VDRM up to 1050 A, gate 10V 5ohm 135 200 A/µs r 135 1600 A 25 14.5 kA 1051 x1E3 A²s 1.63 V V SWITCHING di/dt Critical rate of rise of on-state current, min. dv/dt Critical rate of rise of off-state voltage, min. Linear ramp up to 70% of VDRM 135 500 V/µs td Gate controlled delay time, typical VD=100V, gate source 25V, 10 ohm , tr=.5 µs 25 1.1 µs tq Circuit commutated turn-off time, typical dV/dt = 20 V/µs linear up to 75% VDRM Q rr Reverse recovery charge di/dt=-20 A/µs, I= 700 A 200 135 µs µC I rr Peak reverse recovery current VR= 50 V I H Holding current, typical VD=5V, gate open circuit 25 300 mA A I L Latching current, typical VD=5V, tp=30µs 25 700 mA GATE V GT Gate trigger voltage VD=5V 25 3.5 V I GT Gate trigger current VD=5V 25 250 mA VD=VDRM 135 V GD Non-trigger gate voltage, min. 0.25 V V FGM Peak gate voltage (forward) 30 V I FGM Peak gate current 10 A V RGM Peak gate voltage (reverse) 5 V P GM Peak gate power dissipation 150 W P G Average gate power dissipation 2 W Pulse width 100 µs MOUNTING R th(j-c) Thermal impedance Junction to case, per element R th(c-h) Thermal impedance Case to heatsink, per element T j Operating junction temperature V ins RMS insulation voltage 50Hz, circuit to base,all terminal shorted Mounting tourque Case to heatsink Busbars to terminals T Mass ORDERING INFORMATION : ATD571, ADT571 S 16 standard specification VDRM&VRRM/100 25 50 °C/kW 20 °C/kW -30 / 135 °C 4500 V 4 to 6 12 to 18 1500 Nm Nm g ATD571, ADT571 PHASE CONTROL MODULE FINAL SPECIFICATION POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation mar 01 - ISSUE : 01 DISSIPATION CHARACTERISTICS SQUARE WAVE Tcase [°C] 140 135 130 125 120 115 110 105 100 95 90 DC 85 30° 60° 90° 80 0 200 120° 400 180° 600 800 1000 800 1000 IF(AV) [A] PF(AV) [W] 1200 DC 1000 180° 90° 800 DC 120° 60° 30° 600 400 200 0 0 200 400 600 IF(AV) [A] ATD571, ADT571 PHASE CONTROL MODULE FINAL SPECIFICATION POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation mar 01 - ISSUE : 01 DISSIPATION CHARACTERISTICS SINE WAVE Tcase [°C] Tcase [°C] 140 135 130 125 120 115 110 105 100 95 30° 90 60° 90° 85 120° 180° 80 0 200 400 600 800 IF(AV) [A] PF(AV) [W] 1200 1000 60° 800 90° 120° DC 180° 30° 600 400 200 0 0 200 400 IF(AV) [A] 600 800 ATD571, ADT571 PHASE CONTROL MODULE FINAL SPECIFICATION POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation mar 01 - ISSUE : 01 1800 16 1600 14 1400 12 1200 SURGE CHARACTERISTIC Tj = 135 °C 10 ITSM [kA] On-state Current [A] ON-STATE CHARACTERISTIC Tj = 135 °C 1000 800 600 8 6 4 400 2 200 0 0 0.8 1 1.2 1.4 1.6 1 10 n° cycles On-state Voltage [V] TRANSIENT THERMAL IMPEDANCE 60.0 Zth j-c [°C/kW] 50.0 40.0 30.0 20.0 10.0 0.0 0.001 0.01 0.1 1 10 100 t[s] Distributed by All the characteristics given in this data sheet are guaranteed only with uniform clamping force, cleaned and lubricated heatsink, surfaces with flatness < .03 mm and roughness < 2 µm. In the interest of product improvement POSEICO SPA reserves the right to change any data given in this data sheet at any time without previous notice. If not stated otherwise the maximum value of ratings (simbols over shaded background) and characteristics is reported. 100