RoHS Single Port RJ45 CONNECTOR WITH INTEGRATED MAGNETICS,TAB DOWN 10/100/1000 Base-T Ethernet Application Meets IEEE 802.3 & ANSI X 3.263 standards Impedance: 100OHMS Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz,0.1VRMS with 8mA DC Bias Always EU RoHS/ELV Compliant, wave solder capable to 265°C RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Standard Operating Temperature Electrical Speciļ¬cations @ 25°C Part Number ARA506-5304S OCL(uH Min) @ 100kHz, 0.1V With 8mA DC Bias 350 Turns Ratio chip: cable (±3%) 1CT:1CT Insertion Loss (dB Max) 0.5-100MHz 1.1 Return Loss (dB Min) 0.5-40MHz 18 40.1-100MHz 12-20*log(f/80) Electrical Speciļ¬cations @ 25°C Part Number ARA506-5304S EMI Fingers LED (L/R) YES NO Cross Talk (dB Min) 0.5-40MHz 40.1-100MHz 35 33-20*log(f/50) CMRR (dB Min) 0.5-100MHz HI-POT (VDC) 30 2250 All specifications subject to change without notice. MECHANICAL Unless otherwise specified all tolerances are: ±0.25 in mm ARA506-5304S 21.60 Max 16.00 Max 3.5±0.3 RJ8 13.5 (0.531) RJ1 10.8 (0.425) 3.05 (0.120) 2.54 (0.100) ALLIED ARA506-5304S YYWW P10 P1 BACK VIEW 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 15 01/06/11 www.alliedcomponents.com RoHS Single Port RJ45 CONNECTOR WITH INTEGRATED MAGNETICS,TAB DOWN SCHEMATICS ARA506-5304S VCC C2 GND Notes: 1. R1-R4=75OHMS,1/16W,5%Resistors. 2. C1=1000pF,2KV Decoupling Capacitor. 3. C2-C5=0.01uF,50v,X7R Capacitors. PCB LAYOUT Unless otherwise specified all tolerances are: ±0.05 in mm ARA506-5304S MATERIALS ARA506-5304S Housing: PBT, Flammability Rating 94V-O. Shell: C2680 Brass, 0.2mm thick, 50u" Min nickel plating. Mod Jack Contacts: Phosphor Bronze, 30u" Gold plated. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1501/06/11 www.alliedcomponents.com