RoHS SMD SHIELDED POWER CHIP INDUCTOR Dimensions: .236±.008 (6.0±0.2) PCSV62 Inches (mm) .110±.008 (2.8±0.2) .075±.012 (1.9±0.3) .236±.008 (6.0±0.2) .075±.012 (1.9±0.3) .189 typ. (4.8 typ.) Allied Part Number PCSV62-1R0T-RC PCSV62-1R5T-RC PCSV62-2R2T-RC PCSV62-3R3T-RC PCSV62-4R7M-RC PCSV62-6R0M-RC PCSV62-6R8M-RC PCSV62-100M-RC PCSV62-150M-RC PCSV62-220M-RC PCSV62-330M-RC PCSV62-470M-RC PCSV62-680M-RC PCSV62-101M-RC Inductance Tolerance (µh) (%) Test Freq. Khz, 1V 1.0 1.5 2.2 3.3 4.7 6.0 6.8 10 15 22 33 47 68 100 30 30 30 30 20 20 20 20 20 20 20 20 20 20 100 100 100 100 100 100 100 100 100 100 100 100 100 100 RDC (mΩ) ±30% Isat (A) Typ. Irms (A) Typ. Marking 13 16 20 28 38 45 50 65 95 135 220 320 420 600 7.6 6.3 5.4 4.3 3.7 3.3 3.1 2.5 2.0 1.6 1.3 1.1 0.98 0.82 5.2 4.8 4.0 3.5 3.2 2.8 2.7 2.3 1.8 1.5 1.4 1.0 0.90 0.80 1R0 1R5 2R2 3R3 4R7 6R0 6R8 100 150 220 330 470 680 101 All specifications subject to change without notice. Features • Magnetically Shielded Construction • Ultra Low Profile Electrical Inductance Range: 1.0µh ~ 100µh (other values being added) Tolerance: Available in 20% & 30% as noted Operating Temp: -25ºC ~ +105ºC Isat: Current at which the Inductance will drop by no more then 30% of its initial value. Irms: Based on a temp rise of ∆ T = 40ºC typical at 25ºC Ambient. Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec Test Equipment (L): Agilent/HP4284A + Agilent/HP16334A (RDC): Chroma MilliOhm Meter Mode16502 Current: Isat: HP4284A + HP42841A Irms: Agilent 6641 System DC Power Supply Physical Packaging: 1500 per Tape and reel Marking: EIA Inductance Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1507/02/12 www.alliedcomponents.com