LM210 Low Profile Miniature Single Phase Surface Mount Bridge Rectifiers Reverse Voltage 1000V Output Current 2.0A Features • • • • • • • Glass passivated standard bridge rectifiers Ideal for automated placement Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 Solder dip 260 °C, 10 s Low profile，Max Height 1.30mm LPMB Typical Applications For use of general purpose AC to DC bridge rectification in power supply supply，charger，office charger office appliance appliance， home appliance and telecome device. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Symbol LM210 Unit VRRM VRMS VDC 1000 V 700 V 1000 V 1.0 (1) Maximum average output rectified current Io(AV) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 60 A I 2t TJ, TSTG 15 0 15.0 A sec - 55 to + 150 °C Rating for fusing(t<8 fusing(t<8.3ms) 3ms) Operating junction and storage temperature range Electrical Characteristics Parameter Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance Test Conditions IF=1.0 A, TA=25℃ TA=25℃ TA=125℃ 4.0 V, 1 MHz 2.0 (2) A 2 (TA = 25 °C unless otherwise noted) Symbol LM210 Unit VF 1.1 Volts 5 IR µA 100 CJ 15 pF Symbol LM210 Unit RθJA(1) 50 RθJA(2) 45 Thermal Characteristics Parameter Typical thermal resistance ℃/W (1) Notes: www.goodark.com 15 RθJC 1. On glass epoxy PCB, mounted on 1.3*1.3mm solder pads 2. On 20*20mm aluminum substrate PCB with 1.3*1.3mm solder pads 1/4 2015.08-Rev.A LM210 Low Profile Miniature Single Phase Surface Mount Bridge Rectifiers Reverse Voltage 1000V Output Current 2.0A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 1.Output Rectifier Current Derating Curve Figure 3. Typical Forward Characteristics www.goodark.com Figure 4. Typical Reverse Characteristics 2/4 2015.08-Rev.A LM210 Low Profile Miniature Single Phase Surface Mount Bridge Rectifiers Reverse Voltage 1000V Output Current 2.0A Package Outline Dimensions Unit: mm DIM Unit: inch MIN MAX MIN MAX A 1.2 1.3 0.047 0.051 A1 0 0.1 0.000 0.004 B 0.5 0.75 0.020 0.030 C 0.1 0.25 0.004 0.010 D 2.54 typ. 0.10 typ. E1 4.7 4.9 0.185 0.193 E2 4.7 4.9 0.185 0.193 L 0.4 0.7 0.016 0.028 HE 6.65 6.95 0.262 0.274 Mounting pad layout in mm(inch) Packing Information Packing quantities: 4000 pcs/Reel, 15 Reels/Box; 12mm Tape, 13" Reel Tape & Reel Specification www.goodark.com 3/4 2015.08-Rev.A LM210 Low Profile Miniature Single Phase Surface Mount Bridge Rectifiers Reverse Voltage 1000V Output Current 2.0A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer ’ s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2015.08-Rev.A