L3U1 thru L3U3

L3U1 thru L3U3
Surface Mount Glass Passivated superfast recovery Rectifier
Reverse Voltage 50~200V Forward Current 3A
Features
•
•
•
•
•
•
•
Glass passivated Superfast Recovery rectifiers
Ideal for automated placement
L
Low
fforward
d voltage
lt
d
drop
Low leakage current
Moisture sensitivity: level 1, per J-STD-020
AEC-Q101 qualified
Low profile, typical thickness 1.0mm
eSGB (SMAF)
Typical Applications
For use of fast switch rectification in lighting, cellular phone, portable device, power supplies
and other consumer applications.
Maximum Ratings
(TA = 25 °C unless otherwise noted)
Parameter
Symbol
L3U1
L3U2
L3U3
Unit
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
VRRM
VRMS
VDC
50
35
50
100
70
100
200
140
200
V
V
V
Maximum average forward rectified current
IF(AV)
3.0
A
Peak forward surge current 8.3
8 3 ms single half
sine-wave superimposed on rated load
IFSM
75
A
TJ, TSTG
- 55 to + 150
°C
Operating junction and storage temperature
range
Electrical Characteristics
Parameter
Maximum instantaneous
forward voltage
Maximum DC reverse
current at rated DC
blocking voltage
Typical reverse recovery
time
Typical junction
i
Typical thermal resistance
(TA = 25 °C unless otherwise noted)
Test Conditions Symbol
3A
VF
TA=25℃
L3U1
L3U2
L3U3
Unit
1.0
Volts
50
µA
10
mA
35
nS
69
pF
20
℃/W
IR
TA=125℃
TA
125℃
IF=0.5A,IR=1.0A,
Irr=0.25A
4.0 V, 1 MHz
juntion to lead
trr
CJ
RθJL
1)
Note1:Thermal resistance from junction to lead,mounted on PCB with 8.0×8.0mm copper pads
www.goodark.com
1/4
2014.09-Rev.A
L3U1 thru L3U3
Surface Mount Glass Passivated superfast recovery Rectifier
Reverse Voltage 50~200V Forward Current 3A
Ratings and Characteristics Curves
(TA = 25℃ unless otherwise noted)
Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current
Figure 1.Forward Current Derating Curve
Figure 3. Typical Reverse Characteristics Figure 4. Typical Junction Capacitance
Figure 5. Typical Instantaneous Forward Characteristics www.goodark.com
2/4
2014.09-Rev.A
L3U1 thru L3U3
Surface Mount Glass Passivated superfast recovery Rectifier
Reverse Voltage 50~200V Forward Current 3A
Package Outline Dimensions
DIM
A
Unit: mm
Unit: inch
MIN
MAX
MIN
MAX
0.92
1.08
0.036
0.043
A1
0
0.1
0.000
0.004
B
1.25
1.45
0.049
0.057
C
0.1
0.25
0.004
0.010
D
2.6
2.8
0.102
0.110
E
4.1
4.3
0.161
0.169
L
0.7
1.1
0.028
0.043
HE
4.8
5.2
0.189
0.205
Soldering footprint
Packing Information
Packing quantities:
Reel size
7"
13"
Quantity/reel
3K
10K
Quantity/inner Box
21K
20K
Quantity/Carton
84K
180K
Tape & Reel Specification
www.goodark.com
3/4
2014.09-Rev.A
L3U1 thru L3U3
Surface Mount Glass Passivated superfast recovery Rectifier
Reverse Voltage 50~200V Forward Current 3A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the
Suzhou Good-Ark product best suited to the customer’s application; they do not convey any
license under any intellectual property rights,
rights or any other rights,
rights belonging to Suzhou GoodGood
Ark Electronics Co., Ltd.or a third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or
infringement of any third-party’s rights, originating in the use of any product data, diagrams,
charts, programs, algorithms, or circuit application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts,
programs and algorithms represents information on products at the time of publication of
these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without
notice due to product improvements or other reasons. It is therefore recommended that
customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou GoodArk Electronics Co., Ltd. for the latest product information before purchasing a product listed
herein The information described here may
herein.
ma contain technical inaccuracies
inacc racies or typographical
t pographical
errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage,
liability, or other loss rising from these inaccuracies or errors. Please also pay attention to
information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including
our website home page.
(http://www.goodark.com)
When using any or all of the information contained in these materials, including product data,
diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a
total system before making a final decision on the applicability of the information and
products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage,
liability or other loss resulting from the information contained herein.
The prior
Th
i written
itt approvall off Suzhou
S h Good-Ark
G d A k Electronics
El t i Co.,
C Ltd.
Ltd is
i necessary to
t reprint
i t or
reproduce in whole or in part these materials.
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further
details on these materials or the products contained herein.
www.goodark.com
4/4
2014.09-Rev.A