SGC0303U thru SGC0306U Surface Mount Glass Passivated superfast recovery Rectifier Reverse Voltage 200~800V Forward Current 3A Features • • • • • • • Glass passivated Superfast Recovery rectifiers Ideal for automated placement Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 AEC-Q101 qualified Low profile - typical height of 1.1 mm Anode Cathode & Heatsink Anode 2 Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol SGC0303U SGC0304U SGC0305U SGC0306U Unit Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current VRRM VRMS VDC IF(AV) 200 140 200 400 280 400 600 420 600 800 560 800 3.0 V V V A Peak forward surge current 8.3 ms single h lf sine-wave half i superimposed i d on rated t d load l d IFSM 100 A - 55 to + 150 °C Operating junction and storage temperature TJ, TSTG range Electrical Characteristics Parameter Test Conditions Maximum instantaneous 3A forward voltage Maximum DC reverse TA=25℃ current at rated DC TA=125℃ blocking voltage IF=0.5A,IR=1.0A, Maximum reverse recovery time Typical junction capacitance Typical thermal resistance1） Irr=0.25A 0 25A 4.0 V, 1 MHz juntion to mount (TA = 25 °C unless otherwise noted) Symbol VF SGC0303U SGC0304U 0.95 1.3 SGC0305U SGC0306U 1.7 Unit Volts 10 IR µA 300 trr 35 nS S CJ 22 pF RθJM 15 ℃/W Notes: 1)Thermal resistance RθJM is junction to mount.Mounted on P.C.B with 30*30mm copper pad area www.goodark.com 1/4 2014.06-Rev.A SGC0303U thru SGC0306U Surface Mount Glass Passivated superfast recovery Rectifier Reverse Voltage 200~800V Forward Current 3A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 1. Typical Instantaneous Forward Characteristics Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 3. Typical Instantaneous Reverse Characteristics Figure 4. Typical Junction Capacitance Figure 5.Forward Current Derating Curve www.goodark.com 2/4 2014.06-Rev.A SGC0303U thru SGC0306U Surface Mount Glass Passivated superfast recovery Rectifier Reverse Voltage 200~800V Forward Current 3A Package Outline Dimensions DIM HE E D B1 B2 A C L L1 L2 L3 D1 E1 Unit: mm MIN MAX 6.4 6.6 5.6 5.8 4.1 4.3 1.7 1.9 0.8 1 1.05 1.2 0.3 0.4 0.85 1.1 4.2 4.4 3.52 Typ. 1.1 1.4 3 3.3 1.86 Typ. Unit: inch MIN 0.252 0.220 0.161 0.067 0.031 0.041 0.012 0.033 0.165 0.139 0.043 0.118 0.073 MAX 0.260 0.228 0.169 0.075 0.039 0.047 0.016 0.043 0.173 Typ. 0.055 0.130 Typ. Soldering footprint Packing Information Packing quantities: p p 13" Reel 5000 pcs/Reel，12mm Tape, Tape & Reel Specification www.goodark.com 3/4 2014.06-Rev.A SGC0303U thru SGC0306U Surface Mount Glass Passivated superfast recovery Rectifier Reverse Voltage 200~800V Forward Current 3A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. errors Suzhou Good-Ark Electronics Co., Co Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using g anyy or all of the information contained in these materials, including g product p data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.06-Rev.A