Solutions for Wind Energy Systems Energy-efficient components and subsystems for high system reliability www.infineon.com/windenergy Contents 2 Introduction 3 Topologies 4 Products 8 Stacks 8 Bipolar modules and discs 10 PrimePACK™ 12 IHM 14 IHV 16 EconoDUAL™ 3 18 EconoPACK™ + 20 EconoPACK™ 22 EiceDRIVER™ boards 24 EiceDRIVER™ ICs 26 Microcontrollers 28 Integrated sensors 30 Linear Hall sensors 32 SmartLEWIS™ MCU 33 Online development support (IPOSIM) 34 Introduction Power semiconductors play a key role to produce energy from renewable sources. In wind turbines, power semiconductors are used to convert power and to couple the generator with the grid. They are also built into various auxiliary drives such as yaw drives, pitch drives, pumps and into protection circuits like crowbars. Wind power converters control a number of vital functions and applications and therefore require power semiconductors of the highest quality standards. This applies in particular to offshore wind converters, which operate in exceptionally harsh environments exposed to salt, humidity etc. Rapid growth is projected for the offshore segment. Wind energy turbines must also be designed to deliver maximum levels of availability in order to contribute to grid stability. This applies not only to the converter, but also to the various auxiliary drives mounted in different positions. Grid stability therefore depends on power semiconductor assemblies offering dynamic capabilities, outstanding functionality and superior reliability. Power semiconductors: From generator to grid 3 Topologies Fixed-speed generators Fixed-speed designs are suited to generators up to 400 kW. New designs are usually based on semiconductor solutions to fulfill grid code requirements. Nevertheless, Infineon delivers the full range of grid coupling components, with thyristors and other bipolar semiconductors available as modules, discs and stacks. IG Grid Doubly Fed Induction Generator (DFIG) This speed-adjustable design is typically deployed in the power range between 400 kW and 2.500 kW. To control the full load only up to one third of the energy needs to be converted over power semiconductors in both directions. Infineon’s IGBTs support optimum performance even at the limits of the operating range. High quality design, low voltage ride through (LVRT) capability and very low output frequencies meet high availability needs. Drive train 4 Grid Electrical Excited (EE) generators An EE generator feeds the inverter via a bipolar rectifier, with the generator voltage controlled by excitation. The grid inverter is controlled by an IGBT as the effect of excitation. This design is an established solution already successfully deployed in modern systems. G Grid Drive train Grid Permanent Magnet (PM) generators Full converters for low-, medium- and high-speed generators provide maximum flexibility to meet LVRT and other grid stability requirements. High efficiency is mandatory and an active front-end inverter adapts variable power and frequency. This design reduces inductive component effort. Infineon’s IGBTs enable modular and scalable system designs. Protection circuits Crowbars, choppers and active filters are important elements in wind turbine designs. Even though these components are not actively involved in feeding energy, they are needed to manage external impacts and fulfill grid stability requirements. Auxiliary drives Several drives are needed for a wind turbine design to function safely and properly. Yaw drives, pitch drives and pumps can be controlled by small inverters. An energy storage solution must be connected to the DC link in pitch control drives to enable emergency shutdown. M 5 Overview of products supplied by Infineon Inverter (p. 4/5) Application Stacks (p. 8) IHM (p. 14) PrimePACK™ (p. 12) IHV (p. 16) EconoDUAL™ 3 EconoPACK™ + (p. 18) (p. 20) Bipolar (p. 10) Driver boards 2ED300C17 (p. 24) PM (p. 5) ✔ ✔ ✔ ✔ ✔ ✔ – ✔ DFIG (p. 4) ✔ ✔ ✔ ✔ ✔ ✔ – ✔ EE (p. 5) ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Protection circuits (p. 5) Application Stacks (p. 8) IHM (p. 14) Bipolar (p. 10) Choppers ✔ ✔ – Crowbars ✔ – ✔ Auxiliary drives (p. 5) 6 Application Low Power Econos (p. 22) EconoDUAL™ 3 (p. 18) Driver ICs 1ED020I12-B2 (p. 26) Pitch control ✔ ✔ ✔ Yaw control ✔ ✔ ✔ Pump control ✔ ✔ ✔ Highest energy efficiency Wide portfolio designed for the highest energy efficiency levels. Our TRENCHSTOP™ IGBT with its trench gate and field stop concept has dramatically improved the static and dynamic losses of IGBT designs. This improved performance has made our power switches more efficient, increasing power density up to 50 percent. In addition, our zero defect strategy, coupled with the experience gained producing more than 1 million TRENCHSTOP™ IGBT wafers to date, is the best guarantee of lowest failure rates and highest reliability. Key benefits: n Industry-leading maximum operating junction temperature of 150°C n Improved performance with lower electrical losses n IGBT power modules offering highest quality and reliability We have a global team of experienced application engineers providing advanced and cost-effective reference solutions and design support for our customers, thereby facilitating and shortening their time-to-market. Environmental sustainability nWe have integrated environmental sustainability in our daily business and our strategy. nWe constantly reduce our environmental footprint. nWe enable energyefficient end-products and applications. nWe enable a sustainable society by providing net environmental benefits. 7 Stacks Our ModSTACK™ HD family is a complete power electronic switch assembly including our standard PrimePACK™ high-power IGBT half-bridge modules. The family supports nominal chip currents from 1000 A up to 3000 A at 1700 V. The standard switch assemblies are equipped with the necessary components for current, voltage and temperature measurement. Features include monitoring functions for self-protection and liquid cooled heat sinks for thermal management with optimized performance. Vertically arranged AC power terminals are mechanically decoupled from the power terminals of the modules to give our customers maximum flexibility when connecting the power bus system. DC Link Inverter Section DC Link Inverter Section ~ ~ ~ ~ ~ Key benefits nHighest power density with PrimePACK™ IGBT4 modules nWide product range supporting all applications nSuited to standardized cabinet frame size nHigh reliability and robust design nParallel operation possible nIncreased operating temperature Tvjop= 150°C with new IGBT4 nLow stray inductance nImproved power cycling and thermal cycling capability nEnlarged clearance and creepage distances nInternal NTC sensor 8 Signal conditioning & monitor Driver 3 phases Electrical interface ~ Signal conditioning & monitor Driver 3 phases Electrical interface The ModSTACK™ HD stack works as a sub-assembly in a full converter system. The general control signals are supplied by a higher-level control unit provided by the customer. The ModSTACK™ HD family provides proven industry-standard electrical interfaces for regular operation and fault signal management. The ModSTACK™ HD can work in stand-alone or parallel mode (master/slave configuration). Up to 8 MW is possible by paralleling up to 4 sub-assemblies. Symmetrical power layout and PWM control has to be provided by the end user. Our ModSTACK™ HD family provides reliable and outstanding stack quality with optimized thermal management. The latest IGBT4 chip technology, combined with an in-built electronic controller and an optimized cooling concept, make this innovative solution ideal for a broad range of wind power systems. IGBT4 1700 VCES VAC = 690 VRMS/ VDC = 1100 V Pmax3) IRMS1) fSW fSWmax2) [kW] [A] [kHz] [kHz] Stack type Implemented IGBT4 modules Topology Case cooling Width x depth x height [mm] 609 600 3 5 6MS10017E41W36460 3 x FF1000R17IE4 B6I MS HD1 liquid (copper) 338 x 590 x 350 691 680 3 5 6MS10017E41W36775 3 x FF1000R17IE4 B6I MS HD1 liquid (aluminum) 338 x 590 x 375 1219 1200 3 4 6MS20017E43W37032 6 x FF1000R17IE4 B6I MS HD3 liquid (copper) 1090 x 596 x 342 1219 1200 3 4 6MS20017E43W381704) 6 x FF1000R17IE4 B6I MS HD3 liquid (copper) 1090 x 596 x 342 1828 1800 3 3 6MS30017E43W35613 9 x FF1000R17IE4 B6I MS HD3 liquid (copper) 1090 x 596 x 342 1828 1800 3 4 6MS30017E43W381694) 9 x FF1000R17IE4 B6I MS HD3 liquid (copper) 1090 x 596 x 342 1828 1800 3 3 6MS30017E43W33015 9 x FF1000R17IE4 B6I MS HD3 liquid (aluminum) 1090 x 596 x 342 2082 2050 3 3 6MS30017E43W34404 9 x FF1000R17IE4 B6I MS HD3 liquid (aluminum) 1090 x 596 x 366 691 1382 680 1360 3 3 8 4 12MS20017E43W35155 3 x FF1000R17IE4 6 x FF1000R17IE4 B6I + B6I MS HD3 liquid (aluminum) 1090 x 596 x 342 Typical output current at VDC=1100V, VAC=690V, fSW= 3 kHz, f0=50Hz, cos(φ)=0.85, TA=40°C, Tvjmax≤150°C. Current derating may be required 3) Pmax for 3-phase system similar to B6I types 4) Optical interface included 1) 2) 9 Bipolar modules and discs The availability and reliability of power semiconductors incorporated in wind power applications are key success factors for the overall design. Our bipolar modules and discs are ideal for these harsh environments with their rugged, highly reliable pressure contact technologies. In today’s windmill systems, they are used as input thyristors and generator voltage rectifiers, in auxiliary power supplies and in protective crowbar applications. The low-maintenance design, high quality and exceptional reliability of our bipolar devices ensure profitable operation over a long lifetime. Bipolar modules Key benefits nShort on fail nHigh overload capability nHigh reliability and long lifetime nLowest maintenance costs 10 Bipolar discs Type VRRM [V] IFSM ∫i2dt IFAVM/Tc V(TO) rT Rthjc max Rthch Tvj max [A] [A2s · 103] [A] [V] [mΩ] [K/W] [K/W] [°C] @10 ms, @10 ms, @180° Tvj max Tvj max @180° @180° Tvj max Tvj max el sin el sin el sin DZ 540 N26 K 2600 14000 980 540/100 0.78 0.31 0.078 0.02 DD 700 N22 K 2200 21000 2205 700/100 0.78 0.19 0.065 0.02 150 DZ 1070 N26 K 2600 35000 6125 1070/100 0.80 0.17 0.045 0.01 160 Type 150 VDRM. VRRM ITSM ∫i2dt ITAVM/Tc V(TO) rT (di/dt)cr tq RthJC max RthCK Tvj max [V] [A] [A s · 103] [A/°C] [V] [mΩ] [A/µs] [µs] [K/W] [K/W] [°C] VDSM = VDRM @10 ms. 10 ms. @180° @Tvj max @Tvj max @DIN typ. @180° @180° VRSM = Tvj max Tvj max el sin el sin el sin 2 IEC VRRM + 100 V 747- 6 TZ 749 N22 KOF 2200 26500 3500 740/85 0.90 0.21 200 350 0.042 0.01 125 TZ 800 N18 KOF 1800 30000 4500 800/85 0.85 0.17 200 240 0.042 0.01 125 TT 425 N18 KOF 1800 12500 781 425/85 0.90 0.30 120 250 0.078 0.02 125 TT 430 N22 KOF 2200 12000 720 430/85 0.95 0.45 150 300 0.065 0.02 125 TT 500 N18 KOF 1800 14500 1051 500/85 0.90 0.27 200 250 0.065 0.02 125 TT 520 N22 KOF 2200 14500 1051 520/85 0.85 0.35 200 250 0.058 0.02 125 Type VDRM. VRRM ITSM ∫i2dt VT/IT ITAVM V(TO) rT (di/dt)cr tq RthJC max Tvj max [V] [kA] [A s · 103] [V/kA] [A] [V] [mΩ] [A/µs] [µs] [K/kW] [°C] VDSM = VDRM @10 ms. @10 ms. Tvj max @180 ° @Tvj max @Tvj max @DIN IEC typ. @180 ° VRSM = Tvj max Tvj max 2 el sin VRRM + 100 V 747- 6 el sin Tc = 85 °C T 1190 N18 TOF VT 1800 22.5 2530 2.05/5.4 1190 0.90 0.190 200 240 23.0 125 T 1500 N18 TOF VT 1800 33.5 5611 2.10/7.0 1500 0.90 0.150 200 240 18.4 125 T 2180 N18 TOF VT 1800 36.0 6480 2.05/8.0 2180 0.90 0.106 200 250 12.5 125 T 3160 N18 TOF VT 1800 57.0 16245 1.37/6.0 3160 0.85 0.082 200 250 8.5 125 11 PrimePACK™ Our PrimePACK™ IGBT modules in half-bridge and chopper configurations (1200 V & 1700 V, 450 A to 1400 A) with internal NTC have been optimized for modern converters. Key highlights include improved thermal properties, low stray inductance and a wide range of operating temperatures up to 150°C. This family is designed to support inverter designs across a broad power range. The excellently placed DC terminal screw connections (all terminals are screw-connected) ensure high parallel design flexibility. Two chopper variants (high side and low side) give design engineers even greater flexibility when choosing the inverter topology. Many years of experience, a proven track record in driving innovation and a selection of the most recent chip generations optimized for high power applications mean that customers can always rely on us for the best converter solutions for wind applications. Key benefits nHigh power density for compact inverter designs nModular design optimized for paralleling nImproved power cycling and thermal cycling capability nHomogenous temperature distribution between the chips nHigh clearance and creepage distance nHigh reliability and robust module construction nStandardized housing 12 FF Halfbridge with NTC DF FD chopper modules with NTC Our PrimePACK™ housing enjoys broad market acceptance and has established itself as an industry standard, used by all well-known manufacturers across countless applications worldwide. Type VCES IC VCEsat Eon/Eoff V A V mWs RthjC max K/W Tvj= 25°C typ. Tvj=125°C typ. per arm FF1000R17IE4 1700 1000 2 390/295 0.024 FF1000R17IE4D_B2 1700 1000 2 365/315 0.024 FF1400R17IP4 1700 1400 1.75 500/625 0.015 FD1000R17IE4 1700 1000 2 390/295 0.024 DF1000R17IE4 1700 1000 2 390/295 0.024 FD1000 R17IE4D_B2 1700 1000 2 365/315 0.024 DF1000 R17IE4D_B2 1700 1000 2 365/315 0.024 13 IHM Our well-known IHM (IGBT High-power Modules) are extremely robust, operating with supreme reliability at temperatures from -40 to +150°C. These devices enjoy widespread market acceptance with more than 2 million IHMs deployed in different applications around the globe. Highlights include superior power cycling with the latest IGBT technology and optimized switching losses. IHMs are available in 1200 V and 1700 V variants in half-bridge, single switch, chopper and diode topologies, covering a range from 400 A to 3600 A. This gives engineers the freedom to design high-power inverters of varying sizes. Electrical separation between the power and auxiliary terminals reduces the stray inductance influence on the sense contacts and makes these modules both easy to control and safe to use. Key benefits nLow VCEsat and Rthj-c nSuperior power cycling with IGBT4 nOptimized switching losses combined with soft switching nWidest product portfolio available in the market nTwo housings: IHM A and IHM B nTwo footprints: 190 x 140 mm, 130 x 140 mm nTwo base-plate materials: AlSiC and Cu nICmax from 400 A to 3600 A in voltage category 1200 V and 1700 V nVarious topologies (half bridge-, single switch-, chopper- and diode modules) 14 Backed by our global design support, our IHM solutions are the preferred choice for powerful, compact and modular converter designs. Customers can also rely on us to continually enhance IHM thermal properties and performance. Half Bridge (FF) Chopper Modules (FD) Single Switches (FZ) Chopper modules with inverted diode (FD …-K) Dual Diode (DD) Modul name Green Modul type C-E-blocking-voltage max. DC-rated current Base plate Housing DD1200S17H4_B2 Dual Diode 1700 V 1200 A AlSiC 130 x 140 mm DD800S17H4_B2 Dual Diode 1700 V 800 A AlSiC 130 x 140 mm FD1200R17HP4-K_B2 Chopper 1700 V 1200 A AlSiC 130 x 140 mm FD1600/1200R17HP4_B2 Chopper 1700 V 1600 A AlSiC 190 x 140 mm FF800R17KP4_B2 Half bridge 1700 V 800 A AlSiC 130 x 140 mm FF1200R17KP4_B2 Half bridge 1700 V 1200 A AlSiC 130 x 140 mm FZ1200R12HP4 Single switch 1200 V 1200 A Cu 130 x 140 mm FZ1600R12HP4 Single switch 1200 V 1600 A Cu 130 x 140 mm FZ2400R12HP4 Single switch 1200 V 2400 A Cu 130 x 140 mm FZ3600R12HP4 Single switch 1200 V 3600 A Cu 190 x 140 mm FZ1200R17HP4 Single switch 1700 V 1200 A Cu 130 x 140 mm FZ1600R17HP4 Single switch 1700 V 1600 A Cu 130 x 140 mm FZ2400R17HP4 Single switch 1700 V 2400 A Cu 130 x 140 mm FZ2400R17HP4_B9 Single switch 1700 V 2400 A Cu 190 x 140 mm FZ3600R17HP4 Single switch 1700 V 3600 A Cu 190 x 140 mm FZ1600R17HP4_B2 Single switch 1700 V 1600 A AlSiC 130 x 140 mm FZ1600R17HP4_B21 Single switch 1700 V 1600 A AlSiC 130 x 140 mm FZ2400R17HP4_B2 Single switch 1700 V 2400 A AlSiC 130 x 140 mm FZ2400R17HP4_B28 Single switch 1700 V 2400 A AlSiC 190 x 140 mm FZ2400R17HP4_B29 Single switch 1700 V 2400 A AlSiC 190 x 140 mm FZ3600R17HP4_B2 Single switch 1700 V 3600 A AlSiC 190 x 140 mm 15 IHV Our IHV (IGBT High-Voltage) modules are ideal for full inverter solutions in the power range above 2 MW. They enable significant cabling savings in turbine designs where the transformer is installed at the base of the tower. Our IHV devices offer blocking voltages of 3300 V, 4500 V or 6500 V. These devices have been successfully deployed in traction applications and industrial medium-voltage inverters for many years. Our broad portfolio supports a wide range of nominal currents, topologies (chopper, diode) and designs. Multilevel inverters such as the popular NPC (Neutral Point Clamped) model can be built with good scalability. Internal isolation enables designs with grounded heat sinks, eliminating the need for deionized cooling fluids. Our application support team provides assistance anywhere in the world, helping in particular to resolve your paralleling, Low Voltage Ride Through (LVRT) and lifetime challenges. Key benefits nLow VCEsat and Rthj-c nGood thermal cycling capability due to AlSiC baseplate nOptimized switching losses nWidest portfolio on the market nTwo housings for different isolation requirements nTwo footprints 190x140 mm² 130x140 mm² nICmax from 200 A to 1500 A nVarious topologies (half bridge-, single switch-, chopper- and diode modules) 16 Half bridge (FF) Chopper modules (FD) Single switches (FZ) Chopper modules with inverted diode (FD …-K) Dual diode (DD) Modul name Green Modul type E-blocking-voltage max. DC-rated current Base plate Housing DD500S33HE3 Dual diode 3300 V 500 A AlSiC 130 x 140 mm DD800S33K2C Dual diode 3300 V 800 A AlSiC 130 x 140 mm DD1200S33K2C Dual diode 3300 V 1200 A AlSiC 130 x 140 mm DD400S45KL3_B5 Dual diode 4500 V 400 A AlSiC 130 x 140 mm DD1200S45KL3_B5 Dual diode 4500 V 1200 A AlSiC 130 x 140 mm DD400S65K1 Dual diode 6500 V 400 A AlSiC 130 x 140 mm DD600S65K1 Dual diode 6500 V 600 A AlSiC 130 x 140 mm DD750S65K3 Dual diode 6500 V 750 A AlSiC 130 x 140 mm FF400R33KF2C Half bridge 3300 V 400 A AlSiC 130 x 160 mm FZ800R33KF2C Single switch 3300 V 800 A AlSiC 130 x 140 mm FZ1000R33HE3 Single switch 3300 V 1000 A AlSiC 130 x 140 mm FZ1000R33HL3 Single switch 3300 V 1000 A AlSiC 130 x 140 mm FZ1200R33HE3 Single switch 3300 V 1200 A AlSiC 190 x 140 mm FZ1500R33HE3 Single switch 3300 V 1500 A AlSiC 190 x 140 mm FZ1500R33HL3 Single switch 3300 V 1500 A AlSiC 190 x 140 mm FZ800R45KL3_B5 Single switch 4500 V 800 A AlSiC 130 x 140 mm FZ1200R45KL3_B5 Single switch 4500 V 1200 A AlSiC 190 x 140 mm FZ400R65KF2 Single switch 6500 V 400A AlSiC 130 x 140 mm FZ600R65KE3 Single switch 6500 V 600A AlSiC 190 x 140 mm FZ750R65KE3 Single switch 6500 V 750A AlSiC 190 x 140 mm 17 EconoDUAL™ 3 Our EconoDUAL™ 3 devices meet growing demands for compact inverter designs, flexibility and optimized electrical performance at highest reliability. These modules combine 17 mm housing with screw power terminals and easy assembly. The gate driver can be easily connected by placing it on top of the module. Low parasitic stray inductance and optimized thermal resistance to the heat sink contribute to excellent inverter designs. All modules are available with our established PressFIT technology for reliable, solderless mounting. They are equipped with state-of-the-art IGBT4 technology up to Tvjop = 150°C for highest power densities and leading-edge power cycling capability – making these devices ideal for wind inverters. Symmetrical module design facilitates parallel operation, optimizing current sharing between IGBT half-bridges. This makes EconoDUAL™ 3 the compact solution of choice for 690 V drives. Key benefits nCompact modules measuring only 17 mm in height nEasy and most reliable assembly: PressFIT controls pins and screw power terminals for completely solderless connections nEasy separation of DC and AC link nNo plugs or cables required nOptimized thermal resistance to heat sink nIdeal for low inductive system designs nHighest power density for compact inverter designs 18 The FF600R17ME4/_B11 is our new flagship product in the EconoDUAL™ 3 family. It was developed with a view to maximizing power density within a given footprint. Copper bonding technology and an improved DCB combine to increase the output power by more than 30 % compared with the 450 A 1700 V version. IGBT4 Product type Product status FF600R17ME4 Green IC VCE(sat) (typ) Configuration Technology Housing In production 600.0 A 1.95 V dual IGBT4 EconoDUAL™ 3 FF600R17ME4_B11 In production 600.0 A 1.95 V dual IGBT4 EconoDUAL™ 3 FF450R17ME4 In production 450.0 A 1.95 V dual IGBT4 EconoDUAL™ 3 FF450R17ME4_B11 In production 450.0 A 1.95 V dual IGBT4 EconoDUAL™ 3 FF300R17ME4 In production 300.0 A 1.95 V dual IGBT4 EconoDUAL™ 3 FF300R17ME4_B11 In production 300.0 A 1.95 V dual IGBT4 EconoDUAL™ 3 FF225R17ME4 In production 225.0 A 1.95 V dual IGBT4 EconoDUAL™ 3 FF225R17ME4_B11 In production 225.0 A 1.95 V dual IGBT4 EconoDUAL™ 3 19 EconoPACK™ + Our EconoPACK™ + D series meets growing market demands for compact inverter designs, flexibility and optimized electrical performance at highest reliability. These modules combine 17 mm housing with screw power terminals and easy assembly. The gate driver can be easily connected by placing it on top of the module. Low parasitic stray inductance and optimized thermal resistance to the heat sink contribute to excellent inverter designs. All modules are available with our established PressFIT technology for reliable, solderless mounting. They are equipped with the state-of-the-art IGBT4 technology up to Tvjop = 150°C for highest power densities and leadingedge power cycling capability – making these devices ideal for wind inverters. Symmetrical module design facilitates parallel operation, optimizing current sharing between IGBT half-bridges. This makes EconoPACK™ + D the compact solution of choice for wind inverters. Key benefits nCompact modules measuring only 17 mm in height nEasy and most reliable assembly: PressFIT controls pins and screw power terminals for completely solderless connections nEasy separation of DC and AC link nNo plugs and cables required nOptimized thermal resistance to heat sink nIdeal for low inductive system designs nHighest power density for compact inverter designs 20 The EconoPACK™ + D series is also available with our innovative pre-applied thermal interface material (TIM) solution. It fulfills the most stringent quality standards for power modules, offering the highest system reliability and output power. ϑ IGBT4 Product type Product status FS500R17OE4D Green IC VCE(sat) (typ) Configuration Technology Housing In production 500.0 A 1.95 V sixpack IGBT4 EconoPACK™ + FS500R17OE4DP In production 500.0 A 1.95 V sixpack IGBT4 EconoPACK™ + FS450R170E4 In production 450.0 A 1.95 V sixpack IGBT4 EconoPACK™ + FS300R170E4 In production 300.0 A 1.95 V sixpack IGBT4 EconoPACK™ + FS225R170E4 In production 225.0 A 1.95 V sixpack IGBT4 EconoPACK™ + 21 EconoPACK™ Our EconoPIM™/EconoPACK™ family was developed to give customers the option of cost-effective, compact designs with the added bonus of simplified, reliable mounting. This optimized family is targeted at low- and medium-power industrial drives used for pitch control in modern windmills. The Econo family extends the power range from 15 A up to 200 A at 600 V/650 V/ 1200 V/1700 V. Devices are available in the well-known EconoPIM™ and EconoPACK™ packages. The Econo housing comes with a copper baseplate for optimized heat spread and greater reliability. It also includes a thermistor (NTC) for internal temperature measurement. Econo modules are available with solder or PressFIT pins. The Econo family features state-of-the-art IGBT4 650 V/1200 V/1700 V chip technology for low switching losses, low saturation voltage and high switching frequency. For ease of design, IGBTs with 10 µs short-circuit robustness are available in the same mechanical layouts for 650 V, 1200 V and 1700 V. EconoBRIDGE™ 2 rectifier modules EconoBRIDGE™ 2 rectifier modules are available in the current range from 104 A to 180 A at 1600 V/1800 V. The available configurations are uncontrolled or halfcontrolled rectifier bridges including brake chopper IGBT and thermal resistor (NTC). Key Benefits nCompact, well established module concept nOptimized development cycle time and cost nConfiguration flexibility nHigh power density nLow stray inductance nRoHS-compliant/UL recognized 22 ϑ EconoPIM™ EconoPACK™ EconoBRIDGE™ 2 with Chopper IGBT and NTC EconoBRIDGE™ 2, half-controlled with Chopper IGBT Article IGBT inverter VCE [V] IC [A] Rectifier diodes RthjC max [K/W] VCEsat Tvj= 25C° [V] VRRM [V] Id/Tc [A]/ [C°] Brake chopper RthjC max [K/W] Vf Tvj= VCES [V] 150C° [V] Ic.IGBT Tc= 80C° [A] RthjC max [K/W] EconoPACK™ 650V 1200V 1700V FS75R07N2E4 650 75 0.60 1.55 FS100R07N2E4 650 100 0.45 1.55 FS150R07N3E4 650 150 0.35 1.55 FS200R07N3E4R 650 200 0.25 1.55 FS75R12KT4_B15 1200 75 0.39 1.85 FS100R12KT4G 1200 100 0.29 1.75 FS150R12KT4 1200 150 0.20 1.75 FS200R12KT4R 1200 200 0.15 1.75 FS100R17N3E4 1700 100 0.25 1.95 FS150R17N3E4 1700 150 0.18 1.95 EconoPIM™ 650V 1200V FP75R07N2E4 650 75 0.60 1.55 1600 80/80 0.65 1.00 650 50 0.80 FP100R07N3E4 650 100 0.45 1.55 1600 100/80 0.50 1.10 650 75 0.60 FP150R07N3E4 650 150 0.35 1.55 1600 150/80 0.40 1.10 650 100 0.45 FP75R12KT4 1200 75 0.39 1.85 1600 140/80 0.65 1.15 1200 50 0.54 FP100R12KT4 1200 100 0.29 1.75 1600 150/80 0.40 1.00 1200 50 0.54 DDB6U104N16RR 1600 105/100 1.08 1.30 1200 50 0.38 DDB6U134N16RR 1600 134/100 0.70 1.35 1200 70 0.25 TDB6HK124N16RR 1600 125/85 0.63 1.35 (125C°) 1200 70 0.25 TDB6HK180N16RR 1600 180/80 0.35 1.20 1200 100 0.29 DDB6U104N18RR 1800 105/100 1.08 1.30 1200 50 0.38 EconoBRIDGE™ 1600V 1800V Extract from our Econo 2/3 product portfolio suitable for pitch-control drives. All modules also available in PressFIT technology (EconoBRIDGE™ <180A on request) 23 EiceDRIVER™ boards Our EiceDRIVER™ board 2ED300C17-S/-ST is a dual-channel, high-voltage gate driver for all Infineon IGBT modules up to 1700 V. These boards are ideally equipped to meet the high safety and reliability demands of wind energy systems. This driver offers outstanding protection features and integrated fault management functionality to ensure safe operation. Desaturation monitoring is used to detect short circuits. A soft shut-down function prevents high switching overvoltages . Undervoltage lock-out (UVLO) is avoids operation with gate voltages that are too low. Another important safety function is the reinforced isolation between the primary and secondary side. Featuring two galvanically isolated channels, these devices can support two operating modes: direct mode and half-bridge mode. In half-bridge mode, an interlocking logic prevents cross-currents. In addition, the integrated isolated power supply allows simple paralleling of modules. Key benefits nReinforced isolation according to EN 50178/ IEC 61800-5-1 nReliable operation, also in harsh environments nPatented paralleling of modules 24 EDSafe Type EiceDRIVER™ EiceDRIVER™SSafe Channels Control IGBT max VISO IGM POUT TOP Size Mounting For interface VCE kV A W °C mm x mm method modules V 2ED300C17-S 2 15V CMOS logic 1700 15V CMOS logic 1700 5 ±30 8 -25/85 60.5 x 72 Soldering EconoPACK™ +, 62 mm, IHM, EconoDUAL™, PrimePACK™ 2ED300C17-ST 2 5 ±30 8 -40/85 60.5 x 72 Soldering EconoPACK™ +, 62 mm, IHM, EconoDUAL™, PrimePACK™ 25 EiceDRIVER™ ICs for pitch control units Our new enhanced EiceDRIVER™ family contains highly reliable, high-voltage driver ICs. By using advanced signal isolation technology, EiceDRIVER™ IGBT driver ICs overcome the temperature and lifetime restrictions associated with typical integrated IGBT driver solutions such as level-shifters and optocouplers. This makes them an ideal choice for demanding applications in wind turbine auxiliary drives like pitch control units. The EiceDRIVER™ single-channel products 1ED020I12-F2 and 1ED020I12-B2 provide features such as desaturation detection (DESAT), active Miller Clamp, undervoltage lockout (UVLO) and shut-down in functional or basic isolation. Both devices 1ED020I12-FT and 1ED020I12-BT also support two-level turn-off (TLTO) for safe overcurrent shut-down. In 2ED020I12-F2, two independent channels are implemented in a compact package providing the same functions as 1ED020I12-F2. Our EiceDRIVER™ high-voltage driver IC family covers a wide power range and enables customers to build reliable and efficient drive applications. 10k SGND 10k +5V 100n GND1 IN+ IN+ IN- RDY RDY FLT /FLT RST 26 /RST SGND IN+ RDY FLT RST 10k +5V 10k Key benefits nCoreless transformer isolated driver nBasic insulation according to DIN EN 60747-5-2 nIntegrated protection features nSuitable for operation at high ambient temperatures VCC1 100n VCC1 GND1 IN+ INRDY /FLT /RST VCC2 +15V 1µ 1k DESAT CLAMP OUT 1ED020I12-B2: application example bipolar supply 10R NC 220p GND2 1µ -8V VEE2 VCC2 +15V 1µ DESAT CLAMP OUT NC GND2 VEE2 1k 10R 220p 1ED020I12-B2: application example unipolar supply ED- Enhanced Product List EiceDRIVER™ EiceDRIVER™EEnhanced Technology Max. voltage Input logic Features [V] Basic * Typ. UVLO isolation [V] – 11 / 12 Package 1ED020I12-F2 1channel CLT 1200 Pos & neg RST, DESAT, RDY DSO-16 1ED020I12-B2 1channel CLT 1200 Pos & neg RST, DESAT, RDY X 11 / 12 DSO-16 1ED020I12-FT 1channel CLT 1200 Pos & neg RST, DESAT, RDY, TLTO – 11 / 12 DSO-16 1ED020I12-BT 1channel CLT 1200 Pos & neg RST, DESAT, RDY, TLTO X 11 / 12 DSO-16 2ED020I12-F2 2channel CLT 1200 Pos & neg RST, DESAT, RDY – 11 / 12 DSO-36 * Certified according to EN 60747-5-2 27 Microcontrollers We offer a broad range of microcontrollers scaling from 8-bit models to multiple 32-bit cores targeted at embedded real-time applications. Our microcontrollers combine our fast embedded flash with an industry-leading peripheral set optimized for motor control and power conversion. By offering extended temperature ranges and outstanding reliability and quality, we can support all applications from touch control through blade pitch control to power conversion. Our XMC4000 and latest TriCore™ families feature an integrated delta sigma demodulator for isolated current and voltage measurements. In combination with best-in-class PWM timers, this feature lineup supports all current and future power conversion topologies. AC Generator Rectifier 230V AC Inverter PWM PWM Blade Pitch Control ADC Wind Key benefits nPerformance from ~10 to >1500 MIPS nEmbedded flash up to 4 MByte nTemperature range up to +150°C nHigh performance ADCs nIntegrated delta sigma demodulator nBest-in-class PWM timer nHigh-resolution PWM units 28 Sensor ADC 32-bit Microcontroller TC1798 Grid Phase Monitoring Our XMC4000 series benefits from the real-time control and signal-processing capabilities of the ARM® Cortex™-M4 CPU. It provides a set of modern communication interfaces such as Ethernet and USB plus HMI peripherals. Auxiliary functions such as touch control or LED signage can be implemented using our cost-efficient microcontroller series XMC1000. The XMC1000 microcontrollers are based on the ARM® Cortex™-M0 and offer 32-bit performance at 8-bit pricing. Power conversion & inverter control Part numbers Core Clock frequency Memory flash/SRAM Description TC277, TC275 TriCore™ 3x 200 MHz 4.4 MByte/472 KByte AURIX™ series of multi-core MCUs, integrated DSP & lockstep functionality, highly accurate ADC & delta sigma ADC, programmable PWM timer, functional safety package TC1793, TC1798 TriCore™ 300 MHz 4.2 MByte/288KByte Single-core MCUs, integrated DSP functionality, highly accurate & fast ADCs, >100 PWM outputs XMC4000 ARM® Cortex™-M4 120 MHz 1 MByte/160 KByte Integrated DSP, highly accurate ADC & delta sigma ADC, programmable PWM timer, high-resolution PWM unit, motor control library available Blade pitch control Part numbers Core Clock frequency Memory flash/SRAM Description XMC4000 ARM® Cortex™-M4 120 MHz 1 MByte/160 KByte Integrated DSP, highly accurate ADC & delta sigma ADC, programmable PWM timer, motor control library available XMC1300 ARM® Cortex™-M0 32/64 MHz 200 KByte/16 KByte Cost-effective MCU for FOC motor control, 64 MHz MATH co-processor for advanced control loops (CORDIC / DIVIDE), programmable PWM, timer & fast ADC XC800 8051 24 MHz 64 KByte/3 KByte Cost-effective MCU for FOC motor control, integrated MATH co-processor, up to 150°C temperature range HMI & communication Part numbers Core Clock frequency Memory flash/SRAM Description XMC4000 ARM® Cortex™-M4 120 MHz 1 MByte/160 KByte Touch & LED control, display control library available, Ethernet, USB, SPI, etc. XMC1200 ARM® Cortex™-M0 32 MHz 200 KByte/16 KByte Cost-effective MCU with integrated touch & LED control, LED control unit for brightness & color control XC800 8051 24 MHz 64 KByte/3 KByte Low-cost MCU with integrated touch & LED control 29 High-precision integrated sensors We develop sensors for a wide range of industrial applications, including renewable energy, industrial automation and e-mobility. Our offering here includes products such as magnetic position and speed sensors as well as linear Hall sensors. We offer a full range of energy-saving sensors for the fast-growing wind power sector. Highly accurate & robust speed sensors Our differential Hall sensor families TLE4957C(B) and TLE4951/54C(B) are the ideal choice for designers who need a robust speed sensor with high accuracy, air gap performance and vibration robustness. All devices in these families provide precise switching algorithms, dynamic self-calibration and excellent jitter and sensitivity levels, thus ensuring accurate speed measurements for both fine and coarse target wheels in the harshest of environments. All of our sensors are designed to measure speed over a broad frequency range and come with sophisticated protective functionality. The TLE4957 family is a three-wire sensor with a voltage interface and is available with adaptive hidden or adaptive visible hysteresis. The TLE4951/54 family is a two-wire sensor with a current interface. In addition, TLE4954 provides direction information in four different protocol options. All sensors in the TLE4957,TLE4951 and TLE4954 families are available in our innovative iBB package and are ideal for industrial and automotive speed sensing applications. Q VS Key benefits Greater robustness against vibrations nHighly accurate speed measurements from 1 Hz to 12 kHz over large operating air gaps nBroad operating temperature range n High EMC robustness nReverse polarity protection n AEC-Q100 qualified Clamping & Reverse Voltage Protection Hyst Comp Power Supply Regulator Analog Supply Enable Hall Probes + Amplifier - Interface + Tracking ADC Filter - Digital Min Max Algorithm Offset DAC Actual Switching Level Bias for Temperature & Technology Influence Compensation Clamping N-Channel Open Drain Main Comp Digital Supply Oscillator Reset GND 30 Overtemperature & Short-circuit Protection Yes Crankshaft Yes Yes Transmission Yes Industrial Sensor technology Yes Yes Yes Yes Yes Yes Yes Yes Yes Diff. Hall Diff. Hall Diff. Hall Yes Yes Yes Yes Diff. Hall Diff. Hall Diff. Hall Diff. Hall Diff. Hall Yes Yes Yes Yes Yes Yes Yes Yes Yes Diff. Hall Diff. Hall iGMR iGMR Yes Yes Improved air gap/jitter performance Direction information available Yes vibration suppression algorithm Incl. Package without integrated capacitor Yes Yes Yes Yes Yes Yes Yes V H H H H H V V V V/H H H F A/F F A F F F A A A A A A # of pins 4 3 3 3 3 2 2 2 2 2 3 3 3 Interface V V V V V C C C C C V V V Protocol S S S S S S P P P P S S P Yes Yes Yes Yes Yes Yes Yes Yes Package with integrated capacitor Yes iBB-Package Yes 1) Yes V Type of hysteresis1) Interface2) TLE5027 Yes Yes Diff. Hall TLE5025 TLE4957 TLE49543) Yes TLE4953 Yes TLE49513) TLE4942 Wheel speed Camshaft TLE4941plusC TLE4928 TLE4927 TLE4926 TLE4924 TLE4921 Icon/ Description Automotive Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes H = Hidden; V = Visible; F = Fixed; A = Adaptive; P = Programmable | 2) C = Current; V = Voltage interface; S = Single pulse; P = PWM protocol; A = AK protocol | 3) Coming soon 31 Linear Hall sensors High-precision linear Hall sensors for current sensing Our TLE4997/98 family of linear Hall ICs is tailored to the needs of highly accurate angular and linear position detection and current measurement applications. Each product measures the vertical component of a magnetic field and outputs a signal that is directly proportional to the magnetic field. Thanks to digital signal processing based on a 20-bit DSP architecture plus digital temperature compensation, these sensors deliver outstanding temperature stability compared with similar compensation methods. The TLE4998x products also come with a stress compensation feature to extend stability over lifetime and significantly reduce performance degradation. The TLE4997/98 family offers a broad range of packages (including leaded and SMD options) and interface variants, giving engineers a large degree of design flexibility. 32 Industrial Package • • PG-SSO-3-10 PG-TDSO-8 < ±400 µT 5V ±10 % (16 V) • • PG-SSO-3-10 PG-SSO-4-1 PG-SSO-3-9 (2 capacitors) PG-TDSO-8 EEPROM 3 ±8.2 to ±245 LSB/mT < ±400 µT 5V ±10 % (16 V) • • PG-SSO-3-10 PG-SSO-4-1 PG-SSO-3-9 (2 capacitors) PG-TDSO-8 TLE4998C EEPROM 3 ±8.2 to ±245 LSB/mT < ±400 µT 5V ±10 % (16 V) • • PG-SSO-3-10 PG-SSO-4-1 PG-SSO-3-9 (2 capacitors) PG-TDSO-8 EEPROM 3 ±12.5 to ±300 mV/mT < ±400 µT 5V ±10 % (7 V) TLE4998P EEPROM 3 ±0.2 to ±6 %/mT TLE4998S Offset TLE4997 Number of pins Memory ATV Supply voltage (extended range) Magnetic sensitivity Flux concentrator (blue) surrounding the conductor. A Hall sensor is inserted in the air gap (left). The flux can be further boosted by using multiple windings on the principal conductor (right). Product program Key benefits nBest-in-class accuracy with low drift of output signal over temperature and lifetime (including stress compensation in TLE4998) nProgrammable transfer function (gain, offset), clamping, bandwidth and temperature characteristics nBroad range of interfaces (analog, PWM, SENT and SPC) and especially thin packages (SMD and leaded) available nHigh reliability of sensors due to proven automotive zero-defect program SmartLEWIS™ MCU SmartLEWIS™ – transmitters with embedded microcontrollers Our SmartLEWIS™ family of PMA51xx/PMA71xx microcontrollers comprises an ASK/FSK transmitter for sub-1GHz ISM frequency bands plus an embedded 8051 microcontroller, on-chip flash memory and other exciting peripherals. These highly optimized, single-chip ICs are ideal, for example, for remote control designs, requiring only eleven components to create a key FOB. An associated software library provides powerful functions such as AES encryption, thus enabling fast software development and reduced user code size. The PMA family also offers an optional integrated 125 kHz LF receiver, which can be used for wireless wake-up, or an integrated 10-bit ADC to directly connect an analog sensor. management battery sensor oscillator oscillator Key Benefits nHighest functionality and performance nMultiband transmitter plus embedded 8051 microcontroller with 6 KByte flash for user code and 2 x 128 Byte RAM for EEPROM emulation nComprehensive software library in ROM including license-free encryption algorithms such as AES-128 nProgrammable transmitter power levels of 5, 8 and 10 dBm n125 kHz LF ASK receiver for wireless wake-ups n3-channel, 10-bit ADC nIntegrated temperature and supply voltage sensors Easy design nQuick-start development kit with USB interface nKey FOB reference design with example software (PMA FOB) 33 IPOSIM The Infineon POwer SIMulation (IPOSIM) program is designed to help customers select the right Infineon bipolar products for their rectifier (B2, B6, M3.2 and M6) or AC switch (W1C and W3C) applications. It also helps engineers select suitable IGBT modules for inverter (single- & three-phase in 2-level as well as 3-level) or DC converter (buck and boost) applications. IPOSIM calculates switching and conduction losses for active components in power semiconductor modules by taking into account static and dynamic module parameters as well as thermal ratings. Cooling conditions are custom-specified, but default values are also available. Junction temperatures as a result of applied loads for specific inverter operation points are calculated. IPOSIM also runs calculations for complete load cycles. Results are shown in tables and plotted as charts. Both can be saved for later review or printed as PDF files. For optimum accuracy and convenience, different control algorithms can be applied. IPOSIM is quick and easy to use, enabling each engineer to select the best Infineon product for their application, also working out the applicable semiconductor power losses to establish the expected service life. Visit the website and run a sample calculation yourself. web.transim.com/Infineon-IPOSIM 34 IPOSIM calculation results Selected module IHV 6.5 kV 140 x 190 Input DC link voltage Vdc Frequency f0 Switching frequency fs Modulation factor m Cos φ Operation point current Irms Thermal input Max. junction temperature Tj Max. ambient temperature Ta Rth heat sink per arm FZ750R65KE3 3600 V 50 Hz 400 Hz 1 1 600 A 125°C 60°C 0,006 K/W Losses at 600 A Static losses Dynamic losses Total losses Temperatures at 600 A Tjmax Tjmin Tc Ths IGBT 859 W 1541 W 2400 W IGBT 122.3° C 116.7° C 98.6° C 77.4° C Diodes 74 W 405 W 478 W ripple Δ T j [K] 5,5 K IGBT power simulation 6000 Losses (IGBT)/W Tjc 5000 Losses (diode)/W 4000 Max. losses (IGBT) @ Tcase= 80°C Tch Losses per switch (IGBT + diode)/W Tha 110 Tjmax=125°C Max. losses (diode) @ Tcase= 80°C 3000 80 2000 1000 0 0 200 400 600 800 1000 1200 °C 60 0 53 106 159 212 265 345 424 530 689 Average losses for sinusoidal output current at 400 Hz Temperature distribution across IGBT junction-to-case, switching frequency case-to-heat sink and heat sink-to-ambient for Ta = 60° C and a given heat sink 35 Ask Infineon. Get connected with the answers. Where you need it. When you need it. Infineon offers its toll-free 0800/4001 service hotline as one central number, available 24/7 in English, Mandarin and German. Our global connection service goes way beyond standard switchboard services by offering qualified support on the phone. Call us! nGermany ...................... 0800 951 951 951 (German/English) mainland .......... 4001 200 951 (Mandarin/English) nIndia ........................... 000 800 4402 951 (English) nUSA ............................. 1-866 951 9519 (English/German) n Other countries ............ 00* 800 951 951 951 (English/German) n Direct access ............... +49 89 234-0 (interconnection fee, German/English) n China, *Please note: Some countries may require you to dial a code other than “00” to access this international number, please visit www.infineon.com/service for your country! Where to Buy Infineon Distribution Partners and Sales Offices Please use our location finder to get in contact with your nearest Infineon distributor or sales office. www.infineon.com/WhereToBuy Infineon Technologies – innovative semiconductor solutions for energy efficiency, mobility and security. Published by Infineon Technologies AG 85579 Neubiberg, Germany © 2013 Infineon Technologies AG. All Rights Reserved. Visit us: www.infineon.com Order Number: B133-H9795-X-X-7600 Date: 04 / 2013 Attention please! The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/ or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.