948H-01

MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TSSOP24 7.8x4.4, 0.65P
CASE 948H
ISSUE B
DATE 21 JUN 2012
SCALE 1:1
NOTE 4
A
D
NOTE 6
B
24
13
GAUGE
PLANE
E1
NOTE 5
L2
NOTE 6
L
E
PIN 1
1
REFERENCE
DETAIL A
12
e
24X
TOP VIEW
0.15 C B
b
0.10
S
2X 12 TIPS
C B
M
S
A
S
NOTE 3
A
0.05 C
A1
0.10 C
24X
C
C
SIDE VIEW
SEATING
PLANE
H
c
DETAIL A
END VIEW
M
DIM
A
A1
b
c
D
E
E1
e
L
L2
M
MILLIMETERS
MAX
MIN
1.20
--0.05
0.15
0.19
0.30
0.09
0.20
7.90
7.70
6.40 BSC
4.30
4.50
0.65 BSC
0.50
0.75
0.25 BSC
0_
8_
GENERIC
MARKING DIAGRAM*
RECOMMENDED
SOLDERING FOOTPRINT
24X
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION.
DAMBAR PROTRUSION SHALL BE 0.08 MAX AT MMC. DAMBAR
CANNOT BE LOCATED ON THE LOWER RADIUS OF THE FOOT.
4. DIMENSION D DOES NOT INCLUDE MOLD FLASH,
PROTRUSIONS OR GATE BURRS. MOLD FLASH,
PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.15
PER SIDE. DIMENSION D IS DETERMINED AT DATUM PLANE H.
5. DIMENSION E1 DOES NOT INCLUDE INTERLEAD FLASH OR
PROTRUSION. INTERLEAD FLASH OR PROTRUSION SHALL
NOT EXCEED 0.25 PER SIDE. DIMENSION E1 IS DETERMINED
AT DATUM PLANE H.
6. DATUMS A AND B ARE DETERMINED AT DATUM PLANE H.
7. A1 IS DEFINED AS THE VERTICAL DISTANCE FROM THE SEATING PLANE TO THE LOWEST POINT ON THE PACKAGE BODY.
0.42
XXXXX
XXXXG
ALYW
24X
1.15
6.70
0.65
PITCH
DIMENSIONS: MILLIMETERS
XXXX
A
L
Y
W
G
= Specific Device Code
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
*This information is generic. Please refer
to device data sheet for actual part
marking.
DOCUMENT NUMBER:
STATUS:
NEW STANDARD:
98ASH70248A
ON SEMICONDUCTOR STANDARD
1
http://onsemi.com
TSSOP24 7.8X4.4, 0.65P
1
© Semiconductor Components Industries, LLC, 2002
October, DESCRIPTION:
2002 − Rev. 0
Electronic versions are uncontrolled except when
accessed directly from the Document Repository. Printed
versions are uncontrolled except when stamped
“CONTROLLED COPY” in red.
Case Outline Number:
PAGE 1 OFXXX
2
DOCUMENT NUMBER:
98ASH70248A
PAGE 2 OF 2
ISSUE
REVISION
DATE
O
RELEASED FOR PRODUCTION.
01 JAN 1994
A
ADDED MARKING DIAGRAM. REQ. BY D. TRUHITTE.
18 APR 2001
B
ADDED RECOMMENDED MOUNTING FOOTPRINT. REQ. BY I. CAMBALIZA.
21 JUN 2012
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
© Semiconductor Components Industries, LLC, 2012
June, 2012 − Rev. B
Case Outline Number:
948H
Similar pages