Download

KVMX-100 (Ver. 1.1)
www.opticis.com
DATA SHEET
Two (2) PCs Switchable Dual-head DVI Optical KVM Extender,
KVMX-100-TR
Contents
 Description
 Features
 Applications
 Absolute Maximum Ratings
 Recommended Operating Conditions
 Electrical Power Supply Characteristics
 DVI Electrical Characteristics
 Optical and Electrical Characteristics
 RS-232C Electrical Characteristics
 Drawing of transmitter and receiver
 DVI Pin Description/RS232C Pin Description
 Reliability Test
Headquarters
Opticis Co., Ltd.
# 16Fl, Kins Tower
8 Sungnam-daero, 331 beon-gil,
Bundang-gu,
Seongnam-si, Gyunggi-do, 463-844
South Korea
Te l: +82 (31) 719-8033
Fax: +82 (31) 719-8032
Copyright © 2015 All rights reserved, Opticis Co., Ltd.
-0-
Jan. 2015
KVMX-100 (Ver. 1.1)
www.opticis.com
Dual-head DVI Optical KVM Extender, KVMX-100-TR
Description
New Dual-head DVI optical KVM extender, KVMX-100-TR is designed to extend Dual DVI outputs
with keyboard, mouse and bi-directional audio. But the key feature of 2:1 KVM switch function inside
KVMX-100-TR enables users to select one PC between two (2) PCs as a host.
KVMX-100-TR transmits DVI, USB HID, RS232 and bi-directional stereo audio signal up to 1.0km
(3280feet) over two (2) duplex LC single-mode fibers or 300m (985feet) over two (2) duplex LC multimode fibers.
Designed for high resolution performance, it guarantees lossless image quality and no frame dropping
to deliver perfect graphic data transmission up to WUXGA (1,920x1,200) at 60Hz.
It provides Auto-mix EDID programing feature that reads EDID information from both local and
remote side displays and then determines the lowest resolution of them. It makes the installation of
KVMX-100-TR easy and flexible at any variable resolutions.
Optionally, we could include convenient remote console switch for selecting local control or remote
control.
The shipping group is as follows;
1) One (1) pair of Transmitter and Receiver
2) Two (2) +12V/3A power adaptors
3) User Manual
Options
1) Remote console switch
2) 19” 1RU mounting rack, mounting bracket
3) Duplex LC Patch Cord (Single or Multi mode glass fiber)
Copyright © 2015 All rights reserved, Opticis Co., Ltd.
-1-
Jan. 2015
KVMX-100 (Ver. 1.1)
www.opticis.com
Features

Switch and Control Two (2) PCs – 2:1 KVM switch function

Transmits DVI, USB HID, RS232 and audio signal up to 1km (3280feet) over two (2) duplex LC
optical fibers.

Supports two (2) single-link DVI displays up to WUXGA (1,920x1,200) resolution at 60Hz.

Operates with both single and multi-mode optical fibers.
- Up to 1.0km (3280feet) with two (2) duplex LC single-mode fibers.
- Up to 300m (985feet) with two (2) duplex LC multi-mode fibers.

Auto-mix EDID features

Saves cost & installation space.

Offers DVI, USB ports for Local two (2) displays and Keyboard/Mouse.

Supports bi-directional stereo audio.

Lossless Image Quality with no Frame Dropping.

USB HID ports for keyboard and mouse

Provides Serial Control Data: RS232C through 9 pin D-sub connector.

Offers optional remote console switch (option)

19” 1RU mounting rack, mounting bracket (option)

Size (WDH): 216mm x 112mm x 44mm

Power supplying: +12V, 3A power adapter

Certifications: CE / FCC
Applications

Keyboard, mouse and video extension and routing system related with servers or PCs control.

Digital display system integration for medical, military, aerospace, factory automation, and traffic
control platforms.

Digital FPD, PDP and projector installation in conference rooms, auditoriums and for kiosk
systems

LED signboards for large scale information display and stadiums
Copyright © 2015 All rights reserved, Opticis Co., Ltd.
-2-
Jan. 2015
KVMX-100 (Ver. 1.1)
www.opticis.com
Absolute Maximum Ratings
Parameter
Storage Temperature
Supply Voltage
Transmitter Differential Input Voltage
Operating Humidity
Lead Soldering Temperature & Time
Symbol
Tstg
VCC
Vd
RH
-
Minimum
- 30
10
10
-
Maximum
+ 70
14
1
85
Units
C
V
V
%
260C, 10 sec
Recommended Operating Conditions
Parameter
Ambient Operating Temperature
Data Output Load
Power Supply Rejection (Note1)
Supply Voltage
Symbol
TA
RLD
PSR
VCC
Minimum
0
Typical
Maximum
+ 50
50
50
+ 12.0
+ 11.4
+ 12.6
Units
C
Ω
mVp-p
V
Note1. Tested with a 50mVp-p sinusoidal signal in the frequency range from 500 Hz to 500 MHz on the V CC supply with
the recommended power supply filter in place. Typically less than a 0.25 dB change in sensitivity is experienced.
Electrical Power Supply Characteristics
(TA = 0 C to +50 C, unless otherwise noted)
Parameter
Supply Voltage
Supply Current
Power Dissipation
TX
RX
TX
RX
Symbol
VCC
ITCC
IRCC
PTX
PRX
Minimum
9.0
980
850
11.8
10.2
Typical
12
1160
880
13.9
10.6
Maximum
14.0
1200
910
14.4
10.9
Units
V
mA
mA
W
W
DVI Electrical Characteristics
TMDS
Parameter
Data Output Load
Graphic Supply Voltage
(Note2)
Single-Ended High Level
Input Voltage
Single-Ended Low Level
Input Voltage
Single-Ended Input Swing
Voltage
TMDS
Parameter
Data Input Load
Graphic Supply Voltage
(Note2)
Single-Ended Output Swing
Voltage (Note3)
Transmitter
Symbol
Minimum
RLD
Typical
50
Maximum
Units
Ω
GVCC
+ 3.1
+ 3.3
+ 3.5
V
GVIH
GVCC 0.01
GVCC
GVCC + 0.01
V
GVIL
GVCC - 0.6
-
GVCC - 0.4
V
0.4
-
0.6
V
Typical
50
Maximum
Units
Ω
+ 3.1
+ 3.3
+ 3.5
V
0.2
-
0.4
V
GVISWING
Receiver
Symbol
Minimum
RLD
GVCC
GVISWING
Note2. Graphic Supply Voltage is regulated reference voltage for signal processing in modules
Note3. TMDS outputs are coupled in AC
Copyright © 2015 All rights reserved, Opticis Co., Ltd.
-3-
Jan. 2015
KVMX-100 (Ver. 1.1)
www.opticis.com
Optical & Electrical Characteristics
Parameters
Symbol
1310 Tx
1550 Rx
Data Bit Rate
1550 Tx
1310 Rx
Fiber Length
9µum core SMF
Condition
(Top = 25℃)
Unit
PRBS 2 -1,NRZ
23
Mbps
23
Mbps
PRBS 2 -1,NRZ
Min.
Typ.
Max.
Remark
1250
155.52
155.52
1250
-10
10 BER,
155Mbps/1.62Gbps
km
1
dBm
-10
TRANSMITTER
Average Launched Power
PO
Extinction Ratio
ER
Center Wavelength
C
Spectral Width
Data Input Diff Voltage
VIN
Optical Rise/Fall Time
tr/tf
If=IBIAS + Imod/2
dB
CW, @ POUT
nm
RMS Width
nm
mV
20 – 80%
6
4
1260
1480
0
@1.65Gbps
@3Gbps
1310
1550
200
1360
1580
2.0
@1.31 µm
@1.55 µm
RMS(-20dB)
1600
0.26
0.26
nsec
RECEIVER
Sensitivity
1310
1550
Maximum Input Power
Data Output Diff Swing
PS
dBm
dBm
dBm
1260
1480
0
600
dB
1
Wavelength
nm
PIN
POUT
LOS Hysteresis
1310
1550
-17
-20
1360
1580
@3Gbps
@1.65Gbps
1000
CML Output
Audio/MIC (Analog)
Analog Sample Rate
Faudio_a
kHz
48
Input level
Output level
Input Impedance
Output Impedance
Ain
Aout
Vpp
Vpp
kΩ
Ω
0.56Vss
0.65
25
100
Vpp=3.3V/Analog
RS-232C Electrical Characteristics
Parameter
Data rate
Input voltage
Output voltage
Symbol
Minimum
Rin
Tout
-25
Typical
±15
Copyright © 2015 All rights reserved, Opticis Co., Ltd.
-4-
Maximum
250
25
Units
kbps
V
V
Jan. 2015
KVMX-100 (Ver. 1.1)
www.opticis.com
Drawing of transmitter and receiver
Dimension [mm]
Transmitter
Receiver
Copyright © 2015 All rights reserved, Opticis Co., Ltd.
-5-
Jan. 2015
KVMX-100 (Ver. 1.1)
www.opticis.com
DVI Pin Description
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
Symbol
CH2CH2+
GND
Functional Description
TMDS Data Signal Channel 2 Negative
TMDS Data Signal Channel 2 Positive
TMDS Data Signal Channel 2 Shield
DDC Clock
DDC Data
N.C.
CH1CH1+
GND
DDC Clock line for DDC2B communication
DDC Data line for DDC2B communication
14
5V
15
GND
Hot plug
Detect
CH0CH0+
GND
5 V Input for Transmitter from Host
5 V Output for Monitor from Receiver
Ground
Signal is driven by monitor to enable the system to identify the presence
of a monitor
TMDS Data Signal Channel 0 Negative
TMDS Data Signal Channel 0 Positive
TMDS Data Signal Channel 0 Shield
GND
CLK+
CLK-
TMDS Clock Signal Shield
TMDS Clock Channel Positive
TMDS Clock Channel Negative
16
17
18
19
20
21
22
23
24
TMDS Data Signal Channel 1 Negative
TMDS Data Signal Channel 1 Positive
TMDS Data Signal Channel 1 Shield
Note: Channels 3, 4 and 5 dual-link data signal pins are not used
RS-232C Pin Description
Pin
1
2
3
4
5
6
7
8
9
Symbol
Received Line
Signal Detector
RD
TD
Data Terminal
Ready
GND
Data Set Ready
Request To Send
Clear To Send
NC
Functional Description
Connected with Pin4 & Pin6 in module
Data Receive: Uplink  Downlink
Data Transmit: Uplink  Downlink
Connected with Pin1 & Pin6 in module
Signal Ground
Connected with Pin1 & Pin4 in module
Connected with Pin8 in module
Connected with Pin7 in module
Connection tips:
1) Connection of PC-to-PC: Cross connection of pins 2 and 3 between two PCs.
2) Connection of PC-to-Device: Straight connection of pin 2:2 and pin 3:3
Copyright © 2015 All rights reserved, Opticis Co., Ltd.
-6-
Jan. 2015
KVMX-100 (Ver. 1.1)
www.opticis.com
Reliability Test
Opticis utilizes three types of test criteria for a reduction of variability and a continuous improvement
of the process by its FEMA (Failure Mode and Effective Analysis) program.
1) Mechanical test (vibration, shock)
2) Temperature & humidity tests
3) EMI test (CE)
Temperature & Humidity Test Data
Heading
Operating
Test
Storage
Test
Test
Operating at each
Temperature
(See Note)
Conditions
Duration
Sample
Failure
Size
30 Min
* 0 ~ 50 °C
(Each
(Interval: 10 °C)
n =3
0
Temperature)
Remarks
Note: Visual Test on the
Display
Low Temperature
* TS = -30 °C
96 HR
n=3
0
1. TS: Storage Temperature
High Temperature
* TS = 70 °C
96 HR
n=3
0
2. RH: Relative Humidity
High Humidity
* TS: 40 °C
96 HR
n=3
0
High Temperature
* RH: 95%
EMI Test Data
EMI: Meet CE class A
STANDARDS
CE (Conducted Emission) &
EN 55 022 (CISPR22)
RE (Radiated Emission)
Copyright © 2015 All rights reserved, Opticis Co., Ltd.
-7-
CONDITIONS
Meet Class A
Jan. 2015
Similar pages