PANASONIC DA2J101

This product complies with the RoHS Directive (EU 2002/95/EC).
DA2J101
Silicon epitaxial planar type
For high speed switching circuits

Package
 Features
 Small reverse current IR
 Short reverse recovery time trr
 Contributes to miniaturization of sets, reduction of component count.
 Eco-friendly Halogen-free package

Code
SMini2-F5-B

Pin Name
1: Cathode
2: Anode
 Packaging

Marking Symbol: A1
Embossed type (Thermo-compression sealing): 3000 pcs / reel (standard)
 Absolute Maximum Ratings Ta = 25°C
Parameter
Symbol
Rating
Unit
VR
80
V
VRM
80
V
IF
100
mA
Peak forward current
IFM
225
mA
Non-repetitive peak forward surge current *
IFSM
500
mA
Junction temperature
Tj
150
°C
Storage temperature
Tstg
–55 to +150
°C
Reverse voltage
Maximum peak reverse voltage
Forward current
Note) *: 1 t = 1 s
 Electrical Characteristics Ta = 25°C±3°C
Parameter
Symbol
Conditions
Min
Typ
Max
Unit
0.92
1.20
V
Forward voltage
VF
IF = 100 mA
Reverse voltage
VR
IR = 100 mA
Reverse current
IR
VR = 80 V
100
nA
Terminal capacitance
Ct
VR = 0 V, f = 1 MHz
1.2
pF
Reverse recovery time *
trr
IF = 10 mA, VR = 6 V, Irr = 0.25 × IR
3
ns
80
V
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.
2. Absolute frequency of input and output is 100 MHz
3. *: trr measurement circuit
Input Pulse
Bias Application Unit (N-50BU)
tp
tr
10%
A
Pulse Generator
(PG-10N)
Rs = 50 Ω
Publication date: November 2010
VR
90%
tp = 2 µs
tr = 0.35 ns
δ = 0.05
Wave Form Analyzer
(SAS-8130)
Ri = 50 Ω
Ver. DED
Output Pulse
t
IF
trr
t
Irr = 0.25 × IR
IF = 10 mA
VR = 6 V
1
This product complies with the RoHS Directive (EU 2002/95/EC).
DA2J101
IF  VF
IR  VR
103
25°C
10−6
1
25°C
10−7
10−8
−30°C
10−2
0
0.4
Terminal capacitance Ct (pF)
Reverse current IR (mA)
Forward current IF (mA)
10−5
Ta = 85°C
10
Ta = 25°C
Ta = 85°C
10−4
10−1
0.8
−30°C
10−9
1.2
Forward voltage VF (V)
2
Ct  VR
1.2
10−3
102
10−3
DA2J101_Ct-VR
DA2J101_ IR-VR
DA2J101_ IF-VF
10−10
0
20
40
60
80
Reverse voltage VR (V)
Ver. DED
100
1.0
0.8
0.6
0.4
0.2
0
0
10
20
30
Reverse voltage VR (V)
40
This product complies with the RoHS Directive (EU 2002/95/EC).
DA2J101
SMini2-F5-B
Unit: mm
1.25 ±0.10
+0.05
0.13 −0.02
0.35 ±0.05
2.5 ±0.2
1.7 ±0.1
2
5°
0 to 0.05
1
0.4 ±0.1
0.50 ±0.05
(0.15)
0.7 ±0.1
5°
Ver. DED
3
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any
other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any
other company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for general applications (such as office equipment, communications
equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book.
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment,
life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of
the products may directly jeopardize life or harm the human body.
It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with
your using the products described in this book for any special application, unless our company agrees to your using the products in
this book for any special application.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.
20100202