Data sheet AH534A_W Part number : SPHWHTA5N000W2RSEC SPHWHTA5N000W2RSEC Introduction Part number : SPHWHTA5N000W2RSEC Automotive head lamp lighting source Features Package : Silicone covered ceramic substrate Dimension : 5.3 mm x 3.3 mm Luminous flux : Typ. 700 lm @700 mA Color coordinate group : Appropriate to ECE Chip configuration : 4 chip array (1x4) Viewing angle: 120˚ Applications Automotive head lamp Environmental compliance Samsung is compliant to the restrictions of hazardous substances in electronic equipment, namely, the RoHS, ELV, ISO14001 and REACH directives. Samsung will not intentionally supplement the restricted materials to the head lamp LED product : Cd, Pb, Hg, PBBs, PBDEs and Cr6+ 2015.02.06 / Rev.03 - 1 - SPHWHTA5N000W2RSEC Table of contents ------------------------------------------ Product overview Part number description Characteristic 3 ---------------------------------- 3 -----------------------------------------------Typical characteristics ---------------------------------Luminous flux bin ---------------------------------Forward voltage bin ---------------------------------Chromaticity coordinates bin ---------------------------------- 4 Absolute maximum rating Typical characteristic graph Mechanical dimension 4 4 4 5 ------------------------------ 6 ----------------------------- 7 ---------------------------------- 11 Soldering condition ----------------------------- 12 Packing information ---------------------------------- 13 Product labeling information Reliability test condition Precaution Hazardous substance analysis Revision history 2015.02.06 / Rev.03 ------------------------------------------------------------ - 15 16 -------------------------------------------------- 17 ------------------------- 18 ---------------------------------- 19 - 2 - SPHWHTA5N000W2RSEC Product overview • Luminous flux Part number Color of emission Luminous flux Form factor SPHWHTA5N000W2RSEC White Typ. 700 lm 1x4 • Optical source configuration and electric schematic diagram X : 4.67 mm Y : 1.09 mm Tolerance : ± 0.1 mm Electrical Schematic Part number description The part number designation is explained as follows : SP H WH T A5N 0 0 0 W2 RS EC AB C GHI K MN OP QR DE F J L Where: AB - designates company name and package (SP for Samsung LED Package) C - designates package details (H for high power package) DE - designates color (WH for white) F - designates version of product (T for initial version) GHI - designates type of package (A5N for Automotive 5.3x3.3mm and no lens type) J - designates maximum power (0 for 0.95~10.5W) K - designates special internal code (0 for default) L MN - designates CRI (0 for default) - designates forward voltage (W2 for 12~15V) OP - designates CIE Coordination and Wp (RS for R and S bin) QR - designates luminous flux (EC for 700~850lm) 2015.02.06 / Rev.03 - 3 - SPHWHTA5N000W2RSEC Characteristics • Typical characteristics [Tj =25℃][1] Parameter Symbol Value Unit Luminous flux (If = 700mA) lm Typ 700 lm Forward voltage (If = 700mA) Vf Typ 13.5 V Viewing angle φ 120 Deg. Reverse current Ir Thermal resistance (Junction to solder point) Radiant surface not designed for Rth_B < 3.0 K/W A 5.09 mm2 • Luminous flux bin[2] Symbol Φv Condition If = 700 mA mA reverse operation [Tj =25℃][1] Bin code Min Typ Max E0 700 750 F0 750 800 G0 800 850 Unit lm Flux bin of E0 can be used only if color bin of Rb, Sa, and Sb. • Forward voltage bin[2] [Tj =25℃][1] Symbol Condition Bin code Min Typ Max Unit Vf If = 700 mA W2 12 13.5 15 V * Notes [1] Measurement condition : LED(Tj) = Ambient temperature(Ta), by applying pulse current. [2] Φv and Vf tolerances are ±10% and ±0.1V, respectively. 2015.02.06 / Rev.03 - 4 - SPHWHTA5N000W2RSEC • Color bin definition[3] Cx Symbol Condition Bin Code Cx,Cy Cy RA 0.3329 0.3282 0.3289 0.3326 RB 0.3282 0.3259 0.3271 0.3289 0.3498 0.3467 0.3181 0.3211 SA 0.3259 0.3226 0.3245 0.3271 0.3467 0.3423 0.3139 0.3181 SB 0.3226 0.356 0.3498 0.3211 0.3273 If =700mA 0.316 0.3193 0.3245 0.3423 0.3335 0.3053 0.3139 • Color bin definition SA SB RA RB ECE White * Notes [3] Chromaticity coordinates : Cx, Cy according to CIE 1931. Cx and Cy tolerances are ±0.01, respectively. 2015.02.06 / Rev.03 - 5 - SPHWHTA5N000W2RSEC Absolute maximum ratings Parameter Symbol Value Unit Operating temperature range Top -40 ~ +125 ℃ Storage temperature range Tstg -40 ~ +125 ℃ Junction temperature Tjmax +150 ℃ If 1,000 mA If 350 mA mA 1,500mA for ≤ 10msec mA Maximum forward current[4] (Ta : 25 ℃)[5] Minimum forward current[4] (Ta : 25 ℃)[5] Maximum peaked current (Ta : 25 ℃)[5] Reverse voltage (Ta [5] : 25 ℃ ) Vr not designed for reverse operation V * Notes [4] Unpredictable performance may be resulted by driving the product at below Min. If or above Max. If. [5] The measurement condition means that temperature dependence is excluded by applying pulse current. 2015.02.06 / Rev.03 - 6 - SPHWHTA5N000W2RSEC Typical characteristics graph Typical spectrum : If = 700mA, Ta = 25°C[6] Typical color vs. angle If = 700mA, Ta = 25°C[6] * Notes [6] The measurement condition means that temperature dependence is excluded by applying pulse current. 2015.02.06 / Rev.03 - 7 - SPHWHTA5N000W2RSEC Relative luminous flux & forward voltage vs. forward current Chromaticity coordinates shift vs. forward current If = 700mA, Ta = 25°C 2015.02.06 / Rev.03 - 8 - SPHWHTA5N000W2RSEC • Luminous flux & forward voltage vs. temperature[7] If = 700mA Chromaticity coordinate shift vs. temperature[7] If = 700mA, Tc = 25℃ * Notes [7] The measurement condition means that temperature dependence is excluded by applying pulse current. 2015.02.06 / Rev.03 - 9 - SPHWHTA5N000W2RSEC • Typical radiant pattern Chip Array :1 X 4 • Permissible forward current[8] If = f (Tc) * Notes [8] The measurement condition means that temperature dependence is excluded by applying pulse current. Forward current depends on the Tc. 2015.02.06 / Rev.03 - 10 - SPHWHTA5N000W2RSEC Mechanical dimension[9] (Unit : mm) [Top View] [Side View] [Front View] • Electric schematic diagram * Notes [9] Tolerance unless otherwise specified is ± 0.1 mm. 2015.02.06 / Rev.03 - 11 - SPHWHTA5N000W2RSEC Soldering conditions Pad configuration & solder pad layout[10] [Pad configuration] [Recommended solder pad & stencil] * Note [10] Unit : mm, Tolerance : ±0.1mm. Reflow soldering condition (Pb free) Reflow frequency : 2 times max. Manual soldering condition Not more than 5 seconds @MAX300℃, under soldering iron.(one time only) 2015.02.06 / Rev.03 - 12 - SPHWHTA5N000W2RSEC Packing information Tape and reel ※ PKG taping direction PKG Taping hole START END LED Mounting Part No LED (Min. 100ea) No LED (Min. 100ea) [Unit: mm] Symbol A B C D E F G H I J K L Spec. 0.3 ±0.05 5.6 ±0.1 1.2 ±0.1 Φ1.5 +0.1 2 ±0.05 8 ±0.1 40 ±0.2 4 ±0.1 1.7 ±0.1 5.5 ±0.05 12 ±0.3 Φ15 +0.1 [Unit: mm] Symbol A B C D E Spec. 17.5 ±1 13 ±0.3 80 ±1 Φ330 ±0.1 13 ±0.5 2015.02.06 / Rev.03 - 13 - SPHWHTA5N000W2RSEC Packing process Dimension of transportation box in mm Width Length Height Remark 225 250 190 7inch type 2015.02.06 / Rev.03 - 14 - SPHWHTA5N000W2RSEC Product labeling information Label information ABCDEF Bin code Part number SPHWHTA5N000 W2RSDD XXXX IIIIIIIIIIIIIIIIIIIIIIIIIIII ①②③④⑤⑥⑦⑧⑨ / 1ⓐⓑⓒ / 1,000 PCS Lot number IIIIIIIIIIIIIIIIIIIIIIIII 1. Bin code AB : Forward voltage(VF) bin CD : Chromaticity coordinate bin EF : Luminous flux(ΦV) bin 2. Lot No. ①②③④⑤⑥⑦⑧⑨ / 1ⓐⓑⓒ / 1,000 PCS ① : Production site (S:Samsung Korea, G:Tianjin China) ② ④ : L (LED) : Product state (A:Normality, B:Bulk, C:First Production, R:Reproduction, S:Sample) : Year (V:2011, W:2012, X:2013...) ⑤ : Month (1 ~ 9, A, B, C) ⑥ : Day (1 ~ 9, A, B ~ V) ③ ⑦⑧⑨ : Samsung LED product number (1 ~ 999) ⓐⓑⓒ : Reel number (1 ~ 999) 2015.02.06 / Rev.03 - 15 - SPHWHTA5N000W2RSEC Reliability test conditions For detailed Information please contact your Samsung sales partner 2015.02.06 / Rev.03 - 16 - SPHWHTA5N000W2RSEC Precaution 1) Absolute maximum ratings are set to prevent LED products from breaking due to extreme stress (temperature, current, voltage, etc.). Usage conditions must never go above the ratings, nor any of two of the factors reach the rating level simultaneously. 2) Please avoid touch or pressure on resin molded part in the products. To handle the products directly, it is recommended to use non metallic tweezers. 3) Device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is recommended to use. 4) LEDs must be stored in a clean environment. If the LEDs are to be stored for 3 months or more after being shipped from Samsung, they should be packed by a sealed container with nitrogen gas injected. 5) After bag is opened, device subjected to soldering, solder reflow, or other high temperature processes must be : a. Mounted within 672 hours at an assembly line with a condition of no more than 30 ℃ / 60 % RH, b. Stored at < 10 % RH. 6) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. 7) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even destruction to LED devices. Damaged LEDs may show some unusual characteristics such as increase in leak current, lowered turn-on voltage, or abnormal lighting of LEDs at low current. 8) Prepare a ESD protective area by placing conductive mattress (106Ω ) and ionizer to remove any static electricity. 9) VOCs (volatile organic compounds) may be occurred by adhesives, flux, hardener or organic additives which is used in luminaires (fixture) and LED silicone bags are permeable to it. It may lead a discoloration when LED expose to heat or light. This phenomenon can give a significant loss of light emitted (output) from the luminaires (fixtures). In order to prevent these problems, we recommend you to know the physical properties for the materials used in luminaires, It requires to select carefully. 2015.02.06 / Rev.03 - 17 - SPHWHTA5N000W2RSEC Hazardous substance analysis report 2015.02.06 / Rev.03 - 18 - SPHWHTA5N000W2RSEC Revision history Date Revision history Author Drawn Approved '13.11.04 Rev.01: Initial edition H.D. KIM J.S.WANG '13.12.09 Rev.02: Color bin(Ra,Rb,Sa,Sb→RA,RB,SA,SB) H.D. KIM J.S.WANG '15.02.06 Rev.03: Color vs. Radiation angle, Taping M.J. KIM H.D. KIM Company information US Samsung Semiconductor Inc., 3655 N. First Street, San Jose CA 95134, USA TEL. +1-408-544-4000 Europe Samsung Electronics Germany GmbH, Samsung House, Am Kronberger Hang 6, Schwalbach/Ts,Germany TEL. +49-6196-66-0 Japan Copyright @1995-2012 All rights reserved Samsung Electronics San #24, Nongseo-Dong, Giheung-Gu, Yongin-City, Gyeongii-Do 446-711 Korea http://www.samsung.com/sec/business/# Sales Contact : [email protected] 2015.02.06 / Rev.03 Samsung Japan Corporation SLED Team 10F, Shinagawa Grand Central Tower 2-16-4, Kounan, Minato-ku, Tokyo 108-8240, Japan TEL. +81-3-6369-6327 China (Tianjin Office in China) Tianjin Samsung LED Co., LTD. Weisi (6th) Rd., Micro-Electronics Industrial Park, Xiqing District, Tianjin 300385, China TEL. +86-755-8608-5550 - 19 -