Data Sheet AM321A_R Part Number : SPMRDT3235A0 SPMRDT3235A0 Introduction Part Number : SPMRDT3235A0 Compact Power Lighting Source Features Package: Au plated 2 pad design package with silicone resin View Angle : 120˚ Typical wavelength : 620nm Optical efficiency : 60 lm/W Precondition : JEDEC Level 2a ESD Withstanding Voltage : up to ±2kV [HBM] Reliability Test : AEC Q-101 qualified Applications traffic lights back lighting (LCD, switches, keys, displays, illuminated advertising) interior and exterior automotive lighting (e.g. dashboard back lighting and brake lights) substitution of micro incandescent lamps marker lights (e.g. steps, exit ways, etc.) signal and symbol luminaire Environmental Compliance Samsung is compliant to the restrictions of hazardous substances in electronic equipment, namely, the RoHS, ELV, ISO14001 and REACH directives. Samsung will not intentionally supplement the restricted materials to the LED product: Cd,Pb,Hg,PBBs,PBDEs and Cr6+ 2015/08/03/Rev.03 - 1 - SPMRDT3235A0 Table of Contents Part Number Description ------------------------ 3 Characteristic ------------------------ 4 Typical Characteristic ------------------------ 4 Luminous intensity Bin ------------------------ 4 Forward Voltage Bin ------------------------ 5 Dominant Wavelength Bin ------------------------ 5 Absolute Maximum Rating ------------------------ 6 Typical Characteristic Graph ------------------------ 7 Mechanical Dimension ------------------------ 11 Soldering Condition ------------------------ 12 Package Information ------------------------ 13 Product Labeling Information ------------------------ 15 Reliability Test Condition ------------------------ 16 Precaution for Use ------------------------ 17 Revision History ------------------------ 19 Company Information ------------------------ 19 2015/08/03/Rev.03 - 2 - SPMRDT3235A0 Part Number Description The Part number designation is explained as follows : SP M RD T 323 5 A 0 AB CD EF AB C DE F GHI J K L MN OP QR Where: AB - designates company name and Samsung LED PKG (SP for Samsung LED PKG) C - designates power variant (M or automotive Middle Power) DE - designates color variant (RD for automotive RED and single color) F - designates LED PKG version (value T for initial version) GHI - designates product configuration and type J - designates operating condition (value 5 for 50mA) K - designates specific property L - designates CRI variant (value 0 for discrete color) MN - designates forward voltage property OP - designates CIE coordination property QR - designates luminous intensity property 2015/08/03/Rev.03 - 3 - SPMRDT3235A0 Characteristics Typical Characteristics [Tj =25℃] Parameter Symbol Value Unit Forward voltage (I F = 50mA) VF 2.20 V Reverse current (V R = 5V) IR 10 ㎂ Peak Wavelength (I F = 50mA) λ Peak 620.0 ㎚ Dominant Wavelength (I F = 50mA) λ Dom 619.5 ㎚ Spectral bandwidth at half maximum △λ 16 ㎚ TCλ Peak 0.13 ㎚/K TCλ Dom 0.07 ㎚/K TCV -2.26 ㎷/K 67 K/W Temperature coefficient of peak wavelength (I F = 50mA, Temperature coefficient of dominant wavelength (I F = 50mA, Temperature coefficient of forward voltage (I F = 50mA, -30℃≤ T≤ 80℃) Thermal resistance R th_J-S (Junction to Solder point) (Elec.) Luminous Intensity Bin[2] Symbol I V, Φ V Condition [Tj =25℃] Luminous Intensity Luminous Flux[3] I V [cd] Φ V [lm] Bin Code Min. Max. Min. Max. BA 1.80 2.24 5.40 6.72 BB 2.24 2.80 6.72 8.40 [1] I F = 50mA * Note [1] Measurement condition : LED(T J ) = Ambient temperature(T A ), by applying pulse current for under 25 ms. [2] Luminous intensity measuring equipment : CAS140CT I V and V F tolerances are ±10% and ±0.1 V, respectively. [3] Luminous flux value is just reference purposes. LED are sorted by the value of luminous intensity. 2015/08/03/Rev.03 - 4 - SPMRDT3235A0 Forward Voltage Bin[2] Symbol VF Condition Bin Code Min. Typ. Max. E1 1.90 - 2.05 E2 2.05 - 2.20 E3 2.20 - 2.35 E4 2.35 - 2.50 Bin Code Min. Typ. Max. C1 615.0 - 619.5 I F = 50mA Unit V • Dominant Wavelength Bin[4] Symbol Condition λD I F = 50mA nm C2 619.5 * Note [4] Wavelength measuring equipment : CAS140CT tolerance ±2 nm 2015/08/03/Rev.03 Unit - 5 - - 624.0 SPMRDT3235A0 Absolute Maximum Ratings Parameter Symbol Value Unit Operating temperature range T OPR -40 ~ 100 ℃ Storage temperature range T STG -40 ~ 100 ℃ T J_Max. 125 ℃ IF 70 mA IF 5 mA I FM 100 mA VR 5 V P TOT 180 ㎽ - ±2 kV Junction temperature Maximum forward current[5] (T J : 25℃)[6] Minimum forward current[5] (T J : 25℃)[6] Maximum peaked current (T J : 25℃)[6] Reverse voltage (T J : 25℃)[6] Power consumption (T J : 25℃)[6] ESD sensitivity(HBM) * Notes [5] Unpredictable performance may be resulted by driving the product at below Min. I F or above Max. IF. [6] The measurement condition means that temperature dependence is excluded by applying pulse current for under 25 ms.. 2015/08/03/Rev.03 - 6 - SPMRDT3235A0 Typical Characteristics Graph Typical Spectrum : I F = 50mA, T J = 25°C Relative Wavelength vs Angle : I F = 50mA, T J = 25°C 2015/08/03/Rev.03 - 7 - SPMRDT3235A0 Relative Luminous Intensity & Forward Voltage vs Forward Current : T J = 25°C Relative Wavelength vs Forward Current : T J = 25°C 2015/08/03/Rev.03 - 8 - SPMRDT3235A0 Relative Luminous Intensity & Forward Voltage vs Temperature : I F = 50mA Relative Wavelength vs Temperature : I F = 50mA 2015/08/03/Rev.03 - 9 - SPMRDT3235A0 Typical Radiant Pattern : I F = 50mA, T J = 25°C Max. Permissible Forward Current : I F = f (T c ) 2015/08/03/Rev.03 - 10 - SPMRDT3235A0 Mechanical Dimension[7] ② Anode mark ① * Note [7] Unit : mm, Tolerance : ±0.10mm Do not place pressure on the encapsulating resin (hatch area) The maximum compressing force is 15N on the polymer • Electric Schematic Diagram ② ① 2015/08/03/Rev.03 - 11 - SPMRDT3235A0 Soldering Conditions Pad Configuration & Solder Pad Layout[8] * Note [8] Unit : mm, Tolerance : ±0.10mm Reflow Soldering Condition (Pb Free) Reflow Frequency : 2 times max. Manual Soldering Condition Not more than 5 seconds @MAX300℃, under soldering iron.(one time only) 2015/08/03/Rev.03 - 12 - SPMRDT3235A0 Packing Information Taping[9] A B 4.0 ±0.10 4.0 ±1.0 C 2.0 ± D 0.05 1.75 ± E 0.10 5.5 ± F 12.0 ± 0.05 G 0.10 3.2 ± H 3.83 ± 0.10 I 0.10 0.23 ± J 2.17 ± 0.02 * Note [9] Unit : mm, Cumulative tolerance/10 pitches to be ±0.2mm LED taping quantity : 2,000EA / Reel. Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10˚ angle to be the carrier tape. Reel[10] A 180.0 B -3.0 60 ±1.0 C 13.0 W1 ± 0.3 [10] Unit : mm 2015/08/03/Rev.03 - 13 - 13.0 ± 0.5 W2 15.4 ± 1.0 0.10 SPMRDT3235A0 Packing Process Dimension of Transportation Box in mm Width Length Height Reels/box 245 220 182 Up to 10 Reels 245 220 86 Up to 5 Reels 2015/08/03/Rev.03 - 14 - SPMRDT3235A0 Product Labeling Information Label Information ABCDEF Bin Code Part Number SPMRDT3235A0AEFCSA XXXX IIIIIIIIIIIIIIIIIIIIIIIIIIII ①②③④⑤⑥⑦⑧⑨ / 1ⓐⓑⓒ / 1,000 PCS IIIIIIIIIIIIIIIIIIIIIIIII Lot Number 현재 이 이미지를 표시할 수 없습니다. 1. Bin Code AB : Forward Voltage(V F ) Bin CD : Chromaticity Coordinate Bin EF : Luminous Intensity(I V ) Bin 2. Lot No. ①②③④⑤⑥⑦⑧⑨ / 1ⓐⓑⓒ / 2,000 PCS ① : Production Site (S:SAMSUNG LED, G:TIANJIN CHINA) ② : L (LED) ③ : Product State (A:Normality, B:Bulk, C:First Production, R:Reproduction, S:Sample) ④ : Year (W:2012, X:2013...) ⑤ : Month (1 ~ 9, A, B, C) ⑥ : Day (1 ~ 9, A, B ~ V) ⑦⑧⑨ : SAMSUNG LED Product number (1 ~ 999) ⓐⓑⓒ : Reel Number (1 ~ 999) 2015/08/03/Rev.03 - 15 - SPMRDT3235A0 Reliability Test Conditions For detailed Information please contact your SAMSUNG Sales partner 2015/08/03/Rev.03 - 16 - SPMRDT3235A0 Precaution for Use 1) For over-current-proof function, customers are recommended to apply resistors to prevent sudden change of the current caused by slight shift of the voltage. 2) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is recommended to use. 3) When the LEDs illuminate, operating current should be decided after considering the ambient maximum temperature. 4) LEDs must be stored in a clean environment. If the LEDs are to be stored for 3 months or more after being shipped from SAMSUNG, they should be packed by a sealed container with nitrogen gas injected. (Shelf life of sealed bags: 12 months, temp. 0~40℃, 20~70% RH) 5) After storage bag is open, device subjected to soldering, solder reflow, or other high temperature processes must be: a. Mounted within 12 months at an assembly line with a condition of no more than 30℃/60%RH, b. Stored at <10% RH 6) Repack unused Products with anti-moisture packing, fold to close any opening and then store in a dry place. 7) Devices require baking before mounting, if humidity card reading is >60% at 23±5℃. 8) Devices must be baked for 1 day at 65±5℃, if baking is required. 9) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even destruction to LED devices. Damaged LEDs may show some unusual characteristics such as increase in leak current, lowered turn-on voltage, or abnormal lighting of LEDs at low current. 2015/08/03/Rev.03 - 17 - SPMRDT3235A0 10) VOCs (volatile organic compounds) may be occurred by adhesives, flux, hardener or organic additives which is used in luminaires (fixture) and LED silicone bags are permeable to it. It may lead a discoloration when LED expose to heat or light. This phenomenon can give a significant loss of light emitted (output) from the luminaires (fixtures). In order to prevent these problems, we recommend you to know the physical properties for the materials used in luminaires, It requires to select carefully. 2015/08/03/Rev.03 - 18 - SPMRDT3235A0 Revision History Date Revision History 2010.12.31 Author Drawn Approved Initial Edition - Preliminary W.H Jung Y.H Song 2012.10.08 Specification format change J.C. Kang S.H. Lee 2012.11.07 Electric Schematic incorrect change J.C. Kang S.H. Lee 2015.08.03 Modify of Packing Information S.Y. Hong S.B. Kwak Company Information US Samsung Semiconductor Inc., 3655 N. First Street, San Jose CA 95134, USA TEL. +1-408-544-4000 Europe Samsung Electronics Germany GmbH, Samsung House, Am Kronberger Hang 6, Schwalbach/Ts,Germany TEL. +49-6196-66-0 Copyright @1995-2015 All rights reserved Samsung Electronics 95, Samsung 2-ro, Giheung-Gu, Yongin-City, Gyeongii-Do 446-711 Korea Japan Samsung Japan Corporation SLED Team 10F, Shinagawa Grand Central Tower 2-16-4, Kounan, Minato-ku, Tokyo 108-8240, Japan TEL. +81-3-6369-6327 China (Tianjin Office in China) http://www.samsung.com/sec/business/# Sales Contact : [email protected] 2015/08/03/Rev.03 Tianjin Samsung LED Co., LTD. Weisi (6th) Rd., Micro-Electronics Industrial Park, Xiqing District, Tianjin 300385, China TEL. +86-755-8608-5550 - 19 -