Previous Datasheet Index Next Data Sheet DISCRETE POWER DIODES and THYRISTORS DATA BOOK To Order Previous Datasheet Index Next DataBulletin SheetI2086/A SD1500C..L SERIES Hockey Puk Version STANDARD RECOVERY DIODES Features 1600A Wide current range High voltage ratings up to 3000V High surge current capabilities Diffused junction Hockey Puk version Case style DO-200AB (B-PUK) Typical Applications Converters Power supplies Machine tool controls High power drives case style DO-200AB (B-PUK) Medium traction applications Major Ratings and Characteristics Parameters SD1500C..L Units 1600 A 55 °C 3010 A 25 °C @ 50Hz 16600 A @ 60Hz 17400 A @ 50Hz 1386 KA2s @ 60Hz 1265 KA2s VRRM range 400 to 3000 V TJ - 40 to 180 °C IF(AV) @ Ths IF(RMS) @ Ths IFSM I2t To Order PreviousSeries Datasheet SD1500C..L Index Next Data Sheet ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage VRRM , maximum repetitive VRSM , maximum non- IRRM max. Code peak reverse voltage V repetitive peak rev. voltage V @ TJ = TJ max. 04 400 500 08 800 900 12 1200 1300 16 1600 1700 20 2000 2100 25 2500 2600 30 3000 3100 Type number SD1500C..L mA 50 Forward Conduction Parameter SD1500C..L Units 1600(820) A 180° conduction, half sine wave 55(85) °C Double side (single side) cooled I F(RMS) Max. RMS forward current 3010 A @ 25°C heatsink temperature double side cooled I FSM Max. peak, one-cycle forward, 16600 non-repetitive surge current 17400 I F(AV) Max. average forward current @ Heatsink temperature t = 10ms No voltage t = 8.3ms reapplied t = 10ms 100% VRRM 14700 t = 8.3ms reapplied Sinusoidal halfwave, 1386 t = 10ms No voltage Initial TJ = TJ max. t = 8.3ms reapplied 980 t = 10ms 100% VRRM 895 t = 8.3ms reapplied 14000 I2t Maximum I2t for fusing 1265 I 2 √t Maximum I2√t for fusing V F(TO)1 Low level value of threshold voltage V F(TO)2 High level value of threshold 13860 A KA2s KA2√s Low level value of forward V 0.95 (I > π x IF(AV)),TJ = TJ max. 0.27 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. slope resistance rf2 High level value of forward mΩ (I > π x IF(AV)),TJ = TJ max. 0.25 slope resistance V FM Max. forward voltage drop t = 0.1 to 10ms, no voltage reapplied (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. 0.83 voltage rf1 Conditions 1.64 V To Order Ipk= 3000A, TJ = TJ max, tp = 10ms sinusoidal wave Previous Datasheet Index Fig. 3 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Fig. 5 - Forward Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current NextSD1500C..L Data SheetSeries Fig. 6 - Forward Power Loss Characteristics To Order Fig. 8 - Maximum Non-Repetitive Surge Current Previous Datasheet SD1500C..L Series Index Next Data Sheet Fig. 9 - Forward Voltage Drop Characteristics Fig. 10 - Thermal Impedance ZthJC Characteristics To Order Previous Datasheet Index NextSD1500C..L Data SheetSeries Thermal and Mechanical Specifications Parameter SD1500C..L TJ Max. junction operating temperature range -40 to 180 Tstg Max. storage temperature range -55 to 200 RthJ-hs Max. thermal resistance, junction F wt 0.073 Units °C to heatsink 0.031 14700 N (1500) (Kg) 255 g Case style DC operation single side cooled K/W Mounting force, ± 10% Approximate weight Conditions DC operation double side cooled DO-200AB(B-PUK) See Outline Table ∆RthJ-hs Conduction (The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC) Conduction angle Sinusoidal conduction Rectangular conduction Single Side Double Side Single Side Double Side 180° 0.009 0.009 0.006 0.006 120° 0.011 0.011 0.011 0.011 90° 0.014 0.014 0.015 0.015 60° 0.020 0.020 0.021 0.021 30° 0.035 0.035 0.036 0.036 Units Conditions K/W TJ = TJ max. Ordering Information Table Device Code SD 150 1 2 0 C 30 L 3 4 5 6 1 - Diode 2 3 - Essential part number 0 = Standard recovery 4 5 - C = Ceramic Puk Voltage code: code x 100 = VRRM (see Voltage Ratings Table) 6 - L = Puk Case DO-200AB (B-PUK) To Order PreviousSeries Datasheet SD1500C..L Index Next Data Sheet Outline Table BOTH ENDS 58 .5 (2 .3 0 ) DIA . M AX . 3.5(0.14) DIA. NOM. x 1.8(0.07) DEEP MIN. Case Style DO-200AB (B-PUK) 34 (1.34) DIA. MAX. All dimensions in millimeters (inches) TWO PLACES 25 .4 (1 ) 26 .9 (1 .06 ) 0.8 (0.03) BOTH ENDS 53 (2.09) DIA. MAX. Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics To Order