TOSHIBA 2SD2353_06

2SD2353
TOSHIBA Transistor
Silicon NPN Triple Diffused Type
2SD2353
Power Amplifier Applications
Unit: mm
•
High DC current gain: hFE = 800 to 3200
•
Low collector saturation voltage: VCE (sat) = 0.4 V (typ.)
Absolute Maximum Ratings (Tc = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO
60
V
Collector-emitter voltage
VCEO
60
V
Emitter-base voltage
VEBO
7
V
DC
IC
3
Pulse
ICP
6
IB
0.6
Collector current
Base current
Collector power
dissipation
Ta = 25°C
Tc = 25°C
Junction temperature
Storage temperature range
PC
2
25
A
A
W
Tj
150
°C
Tstg
−55 to 150
°C
JEDEC
JEITA
―
SC-67
TOSHIBA
2-10R1A
Note: Using continuously under heavy loads (e.g. the application of high
Weight: 1.7 g (typ.)
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are
within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
1
2006-11-21
2SD2353
Electrical Characteristics (Tc = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Collector cut-off current
ICBO
VCB = 60 V, IE = 0
―
―
100
μA
Emitter cut-off current
IEBO
VEB = 6 V, IC = 0
―
―
100
μA
V (BR) CEO
IC = 50 mA, IB = 0
60
―
―
V
Collector-emitter breakdown voltage
hFE (1)
VCE = 5 V, IC = 0.2 A
800
―
3200
hFE (2)
VCE = 5 V, IC = 1.5 A
350
―
―
VCE (sat)
IC = 1 A, IB = 10 mA
―
0.4
1.0
V
Base-emitter voltage
VBE
VCE = 5 V, IC = 0.5 A
―
0.7
1.0
V
Transition frequency
fT
VCE = 5 V, IC = 0.5 A
―
18
―
MHz
VCB = 10 V, IE = 0, f = 1 MHz
―
42
―
pF
DC current gain
Collector-emitter saturation voltage
Collector output capacitance
Cob
Marking
D2353
Part No. (or abbreviation code)
Lot No.
A line indicates
lead (Pb)-free package or
lead (Pb)-free finish.
2
2006-11-21
2SD2353
IC – VCE
IC – VBE
3.0
4
Common emitter
Common emitter
2.5
10
VCE = 5 V
(A)
3
20
7
5
Collector current IC
Collector current IC
(A)
Tc = 25°C
50
4
3
2
2
1
1
2.0
1.5
1.0
Tc = 100°C
25
−25
0.5
IB = 0.5 mA
0
0
2
6
4
Collector-emitter voltage
8
0
0
10
0.4
0.2
VCE (V)
0.6
Base-emitter voltage
hFE – IC
DC current gain hFE
DC current gain hFE
5000
Tc = 100°C
1000
−25
500
300
0.03
0.1
0.3
1
Collector current IC
3
Tc = 25°C
10
1000
VCE = 5 V
500
300
0.03
(A)
0.1
1
3
5
(A)
PC – Ta
Common emitter
(W)
35
25
IC/IB = 100
−25
1
Collector power dissipation PC
Collector-emitter saturation voltage
VCE (sat) (V)
0.3
Collector current IC
VCE (sat) – IC
Tc = 100°C
0.5
0.3
0.1
0.05
0.03
0.01
0.01
VBE (V)
3000
100
0.01
5
5
3
1.4
Common emitter
VCE = 5 V
25
100
0.01
1.2
10000
Common emitter
3000
1.0
hFE – IC
10000
5000
0.8
0.03
0.1
0.3
Collector current IC
1
3
(1) Ta = Tc
30
25
20
15
10
5
0
0
10
(A)
Infinite heat sink
(2) No heat sink
(1)
(2)
20
40
0.01
80
100
120
140
160
Ambient temperature Ta (°C)
3
2006-11-21
2SD2353
rth – tw
100
Transient thermal resistance
rth (°C/W)
Curves should be applied in thermal limited area.
30
(2)
(single nonrepetitive pulse)
(1) Infinite heat sink
(2) No heat sink
10
(1)
3
1
0.3
0.001
0.01
0.1
1
Pulse width
10
tw
100
1000
(s)
Safe Operating Area
10
IC max (pulsed)*
5
3
100 ms*
IC max (continuous)
10 ms*
Collector current IC
(A)
1 ms*
DC operation
Tc = 25°C
1
0.5
0.3
0.1
0.05
0.03
0.01
0.3
*: Single nonrepetitive
pulse Tc = 25°C
Curves must be derated
linearly with increase in
temperature.
1
3
VCEO max
10
Collector-emitter voltage
30
100
VCE (V)
4
2006-11-21
2SD2353
RESTRICTIONS ON PRODUCT USE
20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
5
2006-11-21