ON Semiconductor MPN3404 Silicon Pin Diode This device is designed primarily for VHF band switching applications but is also suitable for use in general–purpose switching circuits. It is supplied in a cost–effective TO–92 type plastic package for economical, high–volume consumer and industrial requirements. • Rugged PIN Structure Coupled with Wirebond 1 Construction for Optimum Reliability Anode • Low Series Resistance @ 100 MHz RS = 0.7 Ohms (Typ) @ IF = 10 mAdc • Sturdy TO–92 Style Package for Handling Ease SILICON PIN SWITCHING DIODE 2 Cathode 1 MAXIMUM RATINGS Rating 2 Symbol Value Unit Reverse Voltage VR 20 Vdc Forward Power Dissipation @ TA = 25°C Derate above 25°C PD 400 4.0 mW mW/°C TJ +125 °C Tstg –55 to +150 °C Junction Temperature Storage Temperature Range CASE 182–06, STYLE 1 TO–92 (TO–226AC) ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit Reverse Breakdown Voltage (IR = 10 µAdc) V(BR)R 20 — — Vdc Diode Capacitance (VR = 15 Vdc, f = 1.0 MHz) CT — 1.3 2.0 pF Series Resistance (Figure 5) (IF = 10 mAdc) RS — 0.7 0.85 Ω Reverse Leakage Current (VR = 15 Vdc) IR — — 0.1 µAdc Semiconductor Components Industries, LLC, 2001 November, 2001 – Rev. 2 1 Publication Order Number: MPN3404/D MPN3404 TYPICAL CHARACTERISTICS 50 1.6 I F , FORWARD CURRENT (mA) R S , SERIES RESISTANCE (OHMS) 1.8 1.4 1.2 1.0 0.8 0.6 0.4 0 2.0 6.0 4.0 8.0 10 12 30 TA = 25°C 20 10 0 0.5 14 0.6 0.7 0.8 0.9 1.0 +100 +140 IF, FORWARD CURRENT (mA) VF, FORWARD VOLTAGE (VOLTS) Figure 1. Series Resistance Figure 2. Forward Voltage 10 100 40 7.0 5.0 I R , REVERSE CURRENT ( µA) C T , DIODE CAPACITANCE (pF) 40 TA = 25°C 4.0 3.0 2.0 10 4.0 VR = 15 Vdc 1.0 0.4 0.1 0.04 0.01 0.004 1.0 +3.0 0 -3.0 -6.0 -9.0 -12 -15 -18 0.001 -60 -21 VR, REVERSE VOLTAGE (VOLTS) -20 0 +20 +60 TA, AMBIENT TEMPERATURE (°C) Figure 3. Diode Capacitance Figure 4. Leakage Current http://onsemi.com 2 MPN3404 PACKAGE DIMENSIONS TO–92 (TO–226AC) CASE 182–06 ISSUE L A B R SEATING PLANE ÉÉ ÉÉ D L P J K SECTION X–X X X D G H V 1 2 C N NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND ZONE R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. STYLE 1: PIN 1. ANODE 2. CATHODE N http://onsemi.com 3 DIM A B C D G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.050 BSC 0.100 BSC 0.014 0.016 0.500 --0.250 --0.080 0.105 --0.050 0.115 --0.135 --- MILLIMETERS MIN MAX 4.45 5.21 4.32 5.33 3.18 4.19 0.407 0.533 1.27 BSC 2.54 BSC 0.36 0.41 12.70 --6.35 --2.03 2.66 --1.27 2.93 --3.43 --- MPN3404 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada Email: [email protected] JAPAN: ON Semiconductor, Japan Customer Focus Center 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031 Phone: 81–3–5740–2700 Email: [email protected] ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800–282–9855 Toll Free USA/Canada http://onsemi.com 4 MPN3404/D