STMICROELECTRONICS BC107B

BC107
BC107B
Low noise general purpose audio amplifiers
Description
The BC107 and BC107B are silicon planar
epitaxial NPN transistors in TO-18 metal case.
They are suitable for use in driver stages, low
noise input stages and signal processing circuits
of television receivers. The PNP complementary
types are BC177 and BC177B respectively.
TO-18
Internal schematic diagram
Order codes
Part Number
Marking
Package
Packing
BC107
BC107
TO-18
Bag
BC107A
BC107B
TO-18
Bag
November 2006
Rev 2
1/9
www.st.com
9
BC107 - BC107B
Electrical ratings
1
Electrical ratings
Table 1.
Absolute maximum rating
Symbol
Value
Unit
VCBO
Collector-emitter voltage (IE = 0)
50
V
VCEO
Collector-emitter voltage (IB = 0)
45
V
VEBO
Emitter-base voltage (IC = 0)
6
V
Collector current
100
mA
Ptot
Total dissipation at Tamb ≤ 25°C
at Tcase ≤ 25°C
0.3
0.75
W
W
Tstg
Storage temperature
-55 to 175
°C
175
°C
Value
Unit
200
500
°C/W
°C/W
IC
TJ
Table 2.
Symbol
Rthj-case
Rthj-amb
2/9
Parameter
Max. operating junction temperature
Thermal data
Parameter
Thermal resistance junction-case
Thermal resistance junction-ambient
__max
__ max
BC107 - BC107B
2
Electrical characteristics
Electrical characteristics
(TCASE = 25°C; unless otherwise specified)
Table 3.
Symbol
ICBO
V(BR)CBO
Electrical characteristics
Parameter
Collector cut-off current
(IE = 0)
Collector-base breakdown
voltage (IE = 0)
Test Conditions
Min.
Typ.
VCB = 40V
VCB = 40V
TC = 150°C
Max.
Unit
15
15
nA
µA
IC = 10µA
50
V
IC = 10mA
45
V
V(BR)EBO
Emitter-base breakdown voltage
IE = 10µA
(IC = 0)
6
V
VCE(sat) (1)
Collector-emitter saturation
voltage
Collector-emitter breakdown
V(BR)CEO(1) voltage (I = 0)
B
VBE(sat) (1) Base-emitter saturation voltage
VBE(on) (1) Base-emitter on voltage
hFE
DC current gain
IC = 10mA
IB = 0.5mA
70
250
mV
IC = 100mA
IB = 5mA
200
600
mV
IC = 10mA
IB = 0.5mA
750
mV
IC = 100mA
IB = 5mA
950
mV
IC = 2mA
VCE = 5V
IC = 10mA
VCE = 5V
IC = 2mA
VCE = 5V
for BC107
for BC107B
IC = 10µA
hfe
Small signal current gain
f = 1kHz
for BC107
for BC107B
IC = 10mA
650
700
mV
700
770
mV
110
450
200
450
VCE = 5V
for BC107
for BC107B
IC = 2mA
550
120
40
150
VCE = 5V
250
300
VCE = 5V
2
f = 100MHz
CCBO
Collector-base capacitance
CEBO
Emitter-base capacitance
NF
Noise figure
IE = 0
IC = 0
Input impedance
VEB = 0.5V
f = 1MHz
IC = 0.2mA VCE = 5V f = 1kHz
RG =2kΩ
IC = 2mA
hie
VCB = 10V
f = 1MHz
f = 1kHz
for BC107
for BC107B
B=200Hz
4
6
12
2
pF
pF
10
dB
VCE = 5V
4
kΩ
4.8
kΩ
3/9
BC107 - BC107B
Electrical characteristics
Symbol
Parameter
Test Conditions
IC = 2mA
hre
Reverse voltage ratio
Output admittance
Typ.
Max.
f = 1kHz
for BC107
for BC107B
2.2
10-4
2.7
10-4
30
µS
26
µS
VCE = 5V
f = 1kHz
for BC107
for BC107B
(1) Pulsed: Pulse duration = 300 µs, duty cycle ≤ 1 %
2.1
4/9
Unit
VCE = 5V
IC = 2mA
hoe
Min.
Electrical characteristics (curves)
Figure 1.
DC normalized current gain
Figure 2.
Collector-emitter saturation
voltage
Figure 3.
Collector-base capacitance
Figure 4.
Transition frequency
BC107 - BC107B
Figure 5.
Electrical characteristics
Power rating chart
5/9
Package mechanical data
3
BC107 - BC107B
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in compliance
with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also
marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are
available at: www.st.com
6/9
BC107 - BC107B
Package mechanical data
TO-18 MECHANICAL DATA
mm
DIM.
MIN.
A
inch
TYP.
MAX.
MIN.
TYP.
12.7
MAX.
0.500
B
0.49
0.019
D
5.3
0.208
E
4.9
0.193
F
5.8
0.228
G
2.54
0.100
H
1.2
0.047
I
1.16
0.045
L
45o
45o
D
G
A
I
E
F
H
B
L
C
0016043
7/9
BC107 - BC107B
Revision history
4
Revision history
Table 4.
8/9
Revision history
Date
Revision
Changes
01-Dec-2002
1
First release
06-Nov-2006
2
The document has been reformatted
BC107 - BC107B
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE
GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
9/9