2N3019HR Hi-Rel NPN bipolar transistor 80 V, 1 A Datasheet — production data Features BVCEO 80 V IC (max) 1A HFE at 10 V - 150 mA > 100 Operating temperature range -65°C to +200°C ■ Hi-Rel NPN bipolar transistor ■ Linear gain characteristics ■ ESCC qualified ■ European preferred part list - EPPL ■ Radiation level: lot specific total dose contact marketing for specified level TO-39 Figure 1. Internal schematic diagram Description The 2N3019HR is a silicon planar epitaxial NPN transistor in a TO-39 package. It is specifically designed for aerospace Hi-Rel applications, and ESCC qualified in accordance with the 5201-003 specification. In case of discrepancies between this datasheet and ESCC detailed specification, the latter prevails. Table 1. Device summary Order codes Package Lead finish Marking Type EPPL Packaging 2N3019HR TO-39 Gold Solder Dip 520101103 520101104 ESCC Flight Yes Strip pack October 2012 This is information on a product in full production. Doc ID 15384 Rev 3 1/9 www.st.com 9 Electrical ratings 1 Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCBO Collector-base voltage (IE = 0) 140 V VCEO Collector-emitter voltage (IB = 0) 80 V VEBO Emitter-base voltage (IC = 0) 7 V Collector current 1 A 0.8 5 W W -65 to 200 °C 200 °C Value Unit 35 218 °C/W °C/W IC PTOT Total dissipation at Tamb ≤ 25 °C Total dissipation at Tc ≤ 25 °C TSTG Storage temperature TJ Table 3. Symbol RthJC RthJA 2/9 2N3019HR Max. operating junction temperature Thermal data Parameter Thermal resistance junction-case __ Thermal resistance junction-ambient __ Doc ID 15384 Rev 3 max max 2N3019HR 2 Electrical characteristics Electrical characteristics Tcase = 25 °C unless otherwise specified Table 4. Symbol Electrical characteristics Parameter Test conditions Min. VCB = 90 V VCB = 90 V, Tamb = 150 °C ICES Collector cut-off current (IE = 0) IEBO Emitter cut-off current VEB = 5 V (IC = 0) Typ. Max. Unit - 10 10 nA µA - 10 nA Collector-base breakdown voltage (IE = 0) IC = 100 µA 140 - V Collector-emitter V(BR)CEO (1) breakdown voltage (IB = 0) IC = 30 mA 80 - V V(BR)EBO Emitter-base breakdown voltage (IC = 0) IE = 100 µA 7 - V VCE(sat) (1) Collector-emitter saturation voltage IC = 150 mA, IB = 15 mA IC = 500 mA, IB = 50 mA - 0.2 0.5 V V VBE(sat) (1) Base-emitter saturation voltage IC = 150 mA, IB = 15 mA - 1.1 V DC current gain IC = 0.1 mA, VCE = 10 V IC = 10 mA, VCE = 10 V IC = 150 mA, VCE = 10 V IC = 500 mA, VCE = 10 V IC = 1 A, VCE = 10 V IC = 150 mA, VCE = 10 V Tamb = -65 °C V(BR)CBO hFE (1) VCE = 10 V, IC = 50 mA f = 20 MHz hfe Small signal current gain hfe Small signal short circuit forward current VCE = 5 V, IC = 1 mA transfer ratio 50 90 100 50 15 200 - 300 200 5 - 20 80 - 400 40 CCBO Output capacitance (IE = 0) VCB = 10 V, f = 1 MHz - 12 pF CIBO Input capacitance (IC = 0) VEB = 0.5 V, f = 1 MHz - 60 pF Noise figure VCE = 10 V, IC = 100 µA RG = 1 kΩ Bandwidth = 200 Hz - 4 dB tC(CB) Collector- base constant time VCE = 10 V, IC = 10 mA f = 79.8 MHz - 400 ps ton + toff Pulse response VCC = 20 V, see Figure 8 - 30 ns NF 1. Pulsed duration = 300 µs, duty cycle ≤2 % Doc ID 15384 Rev 3 3/9 Electrical characteristics 2.1 2N3019HR Electrical characteristics (curves) Figure 2. DC current gain (VCE=1 V) Figure 3. DC current gain (VCE=10 V) ( ( 6#%6 6#%6 # # # # # # Figure 4. ,F$ H&%6 # # # ,F$ Figure 5. H&%6 !-V 4/9 !-V Collector emitter saturation voltage Doc ID 15384 Rev 3 ,F$ !-V Base emitter saturation voltage # # # ,F$ !-V 2N3019HR 2.2 Electrical characteristics Test circuits Figure 6. Resistive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor Figure 7. Circuit for electrical measurement Figure 8. Input waveform at point “A” 1. tr ≤2 ns, duty cycle ≤2 %, ZIN = 50 Ω 2. Sampling oscilloscope: ZIN ≥ 100 kΩ, CIN ≤12 pF, tr ≤5 ns Doc ID 15384 Rev 3 5/9 Package mechanical data 3 2N3019HR Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 6/9 Doc ID 15384 Rev 3 2N3019HR Package mechanical data Table 5. TO-39 mechanical data mm Dim. Min. Typ. Max. A 12.70 14.20 B 0.40 0.49 C 0.58 0.74 D 6.00 6.40 8.15 8.25 F 9.10 9.20 G 4.93 5.23 H 0.85 0.95 I 0.75 0.85 L 42° 48° E - Figure 9. TO-39 drawing Doc ID 15384 Rev 3 7/9 Revision history 4 2N3019HR Revision history Table 6. 8/9 Document revision history Date Revision Changes 09-Feb-2009 1 Initial release 07-Jan-2010 2 Modified Table 1 on page 1 05-Oct-2012 3 Minor text changes. Section 2.1: Electrical characteristics (curves) has been added. Doc ID 15384 Rev 3 2N3019HR Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 15384 Rev 3 9/9