STB18NM60N, STF18NM60N STP18NM60N, STW18NM60N N-channel 600 V, 13 A, TO-220, TO-220FP, TO-247, D2PAK second generation MDmesh™ Power MOSFET Preliminary data Features RDS(on) max Type VDSS (@Tjmax) STB18NM60N 600 V < 0.285 Ω 13 A 80 W STF18NM60N 600 V < 0.285 Ω 13 A 30 W STP18NM60N 600 V < 0.285 Ω 13 A 80 W STW18NM60N 600 V < 0.285 Ω 13 A 80 W ID ■ 100% avalanche tested ■ Low input capacitance and gate charge ■ Low gate input resistance PW 3 2 1 3 D²PAK 1 TO-247 3 3 1 2 1 2 TO-220FP TO-220 Application ■ Figure 1. Switching applications Internal schematic diagram Description $ MDmesh™ technology applies the benefits of the multiple drain process to STMicroelectronics’ well-known PowerMESH™ horizontal layout structure. The resulting product offers low onresistance, high dv/dt capability and excellent avalanche characteristics. ' 3 !-V Table 1. Device summary Order codes Marking Package Packaging STB18NM60N 18NM60N D²PAK Tape and reel STF18NM60N 18NM60N TO-220FP Tube STP18NM60N 18NM60N TO-220 Tube STW18NM60N 18NM60N TO-247 Tube June 2009 Doc ID 15868 Rev 1 This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice. 1/14 www.st.com 14 Contents STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/14 ............................................... 6 Doc ID 15868 Rev 1 STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter Unit D²PAK, TO-220,TO-247 VGS ID ID IDM (2) PTOT Gate- source voltage TO-220FP 600 V 13 (1) A 8.2 8.2 (1) A Drain current (pulsed) 52 52 (1) A Total dissipation at TC = 25 °C 80 30 W Drain current (continuous) at TC = 25 °C 13 Drain current (continuous) at TC = 100 °C IAR Avalanche current, repetitive or not-repetitive (pulse width limited by TJ max) TBD A EAS Single pulse avalanche energy (starting TJ = 25 °C, ID = IAR, VDD = 50 V) TBD mJ 15 V/ns dv/dt(3) Peak diode recovery voltage slope VISO Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1 s;TC=25 °C) TJ Tstg Operating junction temperature Storage temperature 2500 V -55 to 150 °C TO-220 TO-247 TO-220FP Unit 1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD ≤ 13 A, di/dt ≤ 400 A/µs, peak VDS ≤ V(BR)DSS Table 3. Symbol Thermal data Parameter D²PAK Rthj-case Thermal resistance junction-case max 1.56 Thermal resistance junction-amb max 62.5 Rthj-amb Tl Maximum lead temperature for soldering purpose Doc ID 15868 Rev 1 50 300 4.17 °C/W 62.5 °C/W °C 3/14 Electrical characteristics 2 STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N Electrical characteristics (TCASE=25 °C unless otherwise specified) Table 4. Symbol On/off states Parameter Test conditions Min. Typ. Max. Unit Drain-source breakdown voltage ID = 1 mA, VGS= 0 IDSS Zero gate voltage drain current (VGS = 0) VDS = Max rating VDS = Max rating,TJ=125 °C 1 10 µA µA IGSS Gate body leakage current (VDS = 0) VGS = ±25 V; VDS=0 0.1 nA VGS(th) Gate threshold voltage VDS= VGS, ID = 100 µA 4 V RDS(on) Static drain-source on resistance VGS= 10 V, ID=6.5 A 0.285 W V(BR)DSS Table 5. Symbol 600 2 V 3 Dynamic Parameter Test conditions Min. Typ. Max. Unit gfs (1) Forward transconductance VDS =0, ID= 0 - TBD - S Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance VDS = 50 V, f =1 MHz, VGS = 0 - 1000 70 3 - pF pF pF Co(tr)(2) Eq. capacitance time related VDS = 0, to 480 V VGS=0 - TBD - pF Co(er)(3) Eq. capacitance energy relate VDS = 0, to 480 V VGS=0 - TBD - pF Rg Intrinsic resistance f=1 MHz open drain - 4 - W Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge VDD = 480 V, ID = 13 A VGS = 10 V (see Figure 3) - 35 TBD TBD - nC nC nC 1. Pulsed: pulse duration=300ìs, duty cycle 1.5% 2. Coss eq.time related is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS 3. Coss eq. energy related is defined as a constant equivalent capacitance giving the same stored energy as Coss when VDS increases from 0 to 80% VDSS 4/14 Doc ID 15868 Rev 1 STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N Table 6. Symbol td(on) tr td(off) tf Table 7. Symbol ISD ISDM (1) VSD(2) trr Qrr IRRM trr Qrr IRRM Electrical characteristics Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions VDD = 300 V, ID = 13 A, RG = 4.7 Ω, VGS = 10 V (see Figure 2) Min. Typ. - TBD TBD TBD TBD Max. Unit - ns ns ns ns Source drain diode Parameter Test conditions Source-drain current Source-drain current (pulsed) Min. Typ. Max. Unit - 13 52 A A TBD V Forward on voltage ISD = 13 A, VGS=0 - Reverse recovery time Reverse recovery charge Reverse recovery current ISD =13 A, di/dt =100 A/µs, VDD = 60 V (see Figure 4) - TBD TBD TBD ns µC A Reverse recovery time Reverse recovery charge Reverse recovery current VDD = 60 V di/dt =100 A/µs, ISD = 13 A Tj = 150°C (see Figure 4) - TBD TBD TBD ns µC A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration = 300 µs, duty cycle 1.5% Doc ID 15868 Rev 1 5/14 Test circuits STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N 3 Test circuits Figure 2. Switching times test circuit for resistive load Figure 4. Test circuit for inductive load Figure 5. switching and diode recovery times Unclamped inductive load test circuit Figure 6. Unclamped inductive waveform Switching time waveform 6/14 Figure 3. Figure 7. Doc ID 15868 Rev 1 Gate charge test circuit STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. Doc ID 15868 Rev 1 7/14 Package mechanical data STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N D2PAK (TO-263) mechanical data Dim A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 mm Min Typ 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 in c h Max 4.60 0.23 0.93 1.70 0.60 1.36 9.35 10.40 Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 8° 0° 0.4 0° Typ 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334 2.54 4.88 15 2.49 2.29 1.27 1.30 0.208 0.624 0.106 0.110 0.055 0.069 0.016 0079457_M 8/14 Min Doc ID 15868 Rev 1 8° STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N Package mechanical data TO-220FP mechanical data mm Dim. Min. Typ. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.5 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 L7 E A B D Dia L5 L6 F1 F2 F G H G1 L4 L2 L3 7012510_Rev_J Doc ID 15868 Rev 1 9/14 Package mechanical data STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N TO-220 mechanical data mm inch Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q 10/14 Typ 4.40 0.61 1.14 0.48 15.25 Max Min 4.60 0.88 1.70 0.70 15.75 0.173 0.024 0.044 0.019 0.6 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 Doc ID 15868 Rev 1 Max 0.181 0.034 0.066 0.027 0.62 0.050 16.40 28.90 3.75 2.65 Typ 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 3.85 2.95 0.147 0.104 0.151 0.116 STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N Package mechanical data TO-247 mechanical data Dim. mm. Min. Typ. Max. A 4.85 5.15 A1 2.20 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c 0.40 0.80 D 19.85 20.15 E 15.45 15.75 e 5.45 L 14.20 14.80 L1 3.70 4.30 L2 18.50 øP 3.55 øR 4.50 S 3.65 5.50 5.50 Doc ID 15868 Rev 1 11/14 Packaging mechanical data 5 STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N Packaging mechanical data D 2 PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. 12/14 mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 MAX. B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 0.449 0.456 F 11.4 11.6 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 R 50 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.075 0.082 1.574 0.933 0.956 Doc ID 15868 Rev 1 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N 6 Revision history Revision history Table 8. Document revision history Date Revision 15-Jun-2009 1 Changes First release Doc ID 15868 Rev 1 13/14 STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 14/14 Doc ID 15868 Rev 1