Series 35W000 SOWIC-to-DIP Adapter – 14/28 Pins FEATURES •A cost-effective means of upgrading to SOIC without changing your PCB layout • Available on 0.300 [7.62] centers. Consult Data Sheet 18011 for Adapters on 0.400 [10.16] or 0.600 [15.24] centers GENERAL SPECIFICATIONS •BOARD MATERIAL: 0.062 thick FR-4 with 1-oz. Cu traces, both sides •PINS: Brass 360 1/2-hard per UNS C36000 ASTM-B16-00 •PIN PLATING: Sn/Pb 93/7 per ASTM B 545 over 100μ [2.54μ] Ni per SAE AMSQQ-N-290 •OPERATING TEMPERATURE: 221°F [105°C] MOUNTING CONSIDERATIONS •SUGGESTED PCB HOLE SIZE: 0.028 ±0.003 [0.71 ±0.08] dia. CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED ORDERING INFORMATION “A” = NO. OF PINS PER ROW x 0.100 [2.54] “D” = (NO. OF PINS PER ROW -1) x 0.100 [2.54] See Table below for P/Ns AVAILABLE IN PANELIZED FORM WITH OR WITHOUT CUSTOMERSUPPLIED DEVICES MOUNTED. CONSULT FACTORY. CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS P/N Pins Type Dim. “B” Centers “C” Dim. “E” Dim. “F” Dim. “G” Dim. “H” 14-35W000-10 14 SOIC 0.500 [12.70] 0.300 [7.62] 0.465 [11.81] 0.076 [1.93] 0.500 [12.70] 0.180 [4.57] 16-35W000-10 16 SOIC 0.500 [12.70] 0.300 [7.62] 0.465 [11.81] 0.076 [1.93] 0.550 [13.97] 0.180 [4.57] 18-35W000-10 18 SOIC 0.500 [12.70] 0.300 [7.62] 0.465 [11.81] 0.076 [1.93] 0.550 [13.97] 0.180 [4.57] 20-35W000-10 20 SOIC 0.500 [12.70] 0.300 [7.62] 0.465 [11.81] 0.076 [1.93] 0.550 [13.97] 0.180 [4.57] 24-35W000-10 24 SOIC 0.500 [12.70] 0.300 [7.62] 0.465 [11.81] 0.076 [1.93] 0.550 [13.97] 0.180 [4.57] 28-35W000-10 28 SOIC 0.500 [12.70] 0.300 [7.62] 0.465 [11.81] 0.076 [1.93] 0.550 [13.97] 0.180 [4.57] Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18007 Rev. AB