ARIES 48-6645-18

P/N 48-6645-18 48-Pin 0.5mm
QFP-to-48-Pin 0.600" DIP Adapter
FEATURES
•Makes 48-pin QFP prototype circuits with a standard breadboard easy.
GENERAL SPECIFICATIONS
•BOARD MATERIAL: 0.062 thick FR-4 with 1-oz. Cu traces, both sides
•PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M
•PIN PLATING: 200µ [5.08µ] Sn/Pb 93/7 per ASASTM B579-73 over 100µ
[2.54µ] Ni per SAE AMS-QQ-N-290
•OPERATING TEMPERATURE: 221°F [105°C]
MOUNTING CONSIDERATIONS
•SUGGESTED PCB HOLE SIZE: 0.028 ±0.003 [0.71 ±0.08] dia.
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity. NOTE: Aries reserves the
right to change product general specifications without notice.
ORDERING INFORMATION
48-6645-18-P
Optional Panelized Version
Bristol, PA 19007-6810 USA
TEL (215) 781-9956 • FAX (215) 781-9845
WWW.ARIESELEC.COM • INFO@ARIESELEC.COM
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
18090
Rev. AA