FEATURES PCB MOUNTING LEDs - Ø 5mm 110 SERIES PACK QUANTITY = 250 PIECES l Material conforms to UL94 V-O flammability ratings l Bi-colour and resistor models enhance potential for l Reverse polarity options available l Product illustrated 110-000-04-52 l Typically available ex stock saving assembly time and board space SPECIFICATIONS Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure up to = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC Vopr CURRENT DC lopr LUMINOUS INTENSITY lv@20mA WAVE OPERATING STORAGE LENGTH TEMP TEMP 627 -40 ~ +85^ -40 ~ +85 λp Topr Tstg STANDARD INTENSITY 110-505-04 Red Colour Diffused 2.0* 20 60 Yes 110-511-04 Yellow Colour Diffused 2.1* 20 40 590 -40 ~ +85^ -40 ~ +85 Yes 110-514-04 Green Colour Diffused 2.2* 20 40 565 -40 ~ +85^ -40 ~ +85 Yes 110-530-04 Red/Green White Diffused 2.0/2.2* 20 30/25 627/565 -40 ~ +85^ -40 ~ +85 Yes 110-581-20 Red Colour Diffused 5 10 50 627 -40 ~ +70 -40 ~ +85 Yes 110-582-20 Yellow Colour Diffused 5 10 20 590 -40 ~ +70 -40 ~ +85 Yes 110-583-20 Green Colour Diffused 5 10 20 565 -40 ~ +70 -40 ~ +85 Yes Vdc mA mcd nm 0 UNITS C C 0 * = Voltage DC for 20mA product is Vf@20mA, not Vopr 505 & 511 514 530 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 073/07 Issue 2 SAMPLES AVAILABLE Page 1 of 3 110 Series Anode Dimensions in mm (Typical) Not to scale Housing Material Polycarbonate This material offers UL94 V-0 flame retardancy* and a high impact strength. This material has a melt point of 290-340°C and is suitable for use in the majority of automatic soldering processes. *Material test thickness 1.6mm LEDs LED Polarity Anode identification is shown in the dimensional diagram. The long lead of a non-cropped unit can also be used to help identify the anode. For the 2 pin Bi-colour units the standard colour configuration is red anode to the ‘+’ sign. Reverse Polarity This is offered on all PCB units, with the exception of the 125 series, if requested to help overcome the problem of systems with reverse polarity connections. Multiple units can also be supplied in reverse polarity but not with mixed polarities. The 2 pin and 3 pin Bi-colours can be supplied in reverse colour configuration. Lead Cropping Should lead cropping be required Marl offer two standard lengths, either by request or by adding one of the following codes to the end of the part number:- -24 = 3mm -26 = 5mm (E.g 110-505-04-26) Other non-standard lead lengths are available on request. Bi-colour 2 Pin Operation To achieve the second colour for a 2 pin Bi-colour unit the supply must be reversed, standard colour configuration for these units is red anode to the ‘+’ sign. Electro-static Discharge (ESD) Build up of electrostatic discharge occurs in many situations involving people moving and handling products. The range of possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual situations. When an operator charged up to these levels handles a ‘static sensitive device’, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and despatch. We recommend all users of LED based products follow the guidelines of BS 100015. Note: All luminous intensity figures refer to the unmodified discrete LED. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 073/07 Issue 2 SAMPLES AVAILABLE Page 2 of 3 110 Series Part numbers also available in the 110 Series: PART NO. COLOUR VOLTAGE DC 110-000-01-50 Red over Green 2mA 110-000-04-50 Red over Green 20mA 110-000-04-51 Yellow over Red 20mA 110-000-04-52 Red over Yellow 20mA 110-000-04-53 Green over Red 20mA (Vdc) Vopr 110-000-04-54 Green over Yellow 20mA 110-000-04-58 Green over Red/Green Bi-colour 20mA 110-000-04-60 Breen over Blue 20mA 110-000-04-61 Green over Yellow Water Clear lens 20mA 110-000-04-63 Yellow over Green 20mA 110-000-13-50 Green over Yellow 20mA RP 110-000-13-51 Green over Red 20mA RP 110-505-01 Red 2mA 110-505-04-50 Red 20mA 110-505-13-26 Red 20mA RP 110-511-01 Yellow 2mA 110-511-04-50 Yellow 20mA 110-514-01 Green 2mA 110-514-04-50 Green 20mA 110-514-13 Green 20mA RP 110-530-13-50 Red/Green Bi-colour 20mA RP 110-581-20-51 Red 5/6Vdc 110-583-20-51 Green 5/6Vdc UNITS VDC The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 073/07 Issue 2 SAMPLES AVAILABLE Page 3 of 3