MICROCIRCUIT DATA SHEET Original Creation Date: 10/12/95 Last Update Date: 02/25/98 Last Major Revision Date: 10/30/97 MNCD4528BM-X REV 1A0 DUAL MONOSTABLE MULTIVIBRATOR General Description The CD4258B is a dual monostable multivibrator. Each device is retriggerable and resettable. Triggering can occur from either the rising or falling edge of an input pulse, resulting in an output pulse over a wide range of widths. Pulse duration and accuracy are determined by external timing components Rx and Cx. Industry Part Number NS Part Numbers CD4528BM CD4528BMJ/883 CD4528BMW/883 Prime Die CD4528BM Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MICROCIRCUIT DATA SHEET MNCD4528BM-X REV 1A0 Features - Wide supply voltage range 3.0V to 18V Separate reset available Quiescent current = 5.0nA/package (typ.) at 5.0Vdc Diode protection on all inputs Triggerable from leading or trailing edge pulse Capable of driving two low-power TTL loads or one low-power Schottky TTL load over the rated temperature range 2 MICROCIRCUIT DATA SHEET MNCD4528BM-X REV 1A0 (Absolute Maximum Ratings) (Note 1, 2) DC Supply Voltage (Vdd) -0.5Vdc to +18Vdc Input Voltage, All Inputs (Vin) -0.5Vdc to Vdd +5.0Vdc Storage Temperature Range (Ts) -65 C to +150 C Power Dissipation (Pd) Dual-In-Line Small Outline Lead Temperature (Tl) (Soldering, 10 seconds) Note 1: Note 2: 700mW 500mW 260 C "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. Except for "Operating Temperature Range" they are not meant to imply that the devices should be operated at these limits. The table of "Electrical Characteristics" provides conditions for actual device operation. Vss = 0V unless otherwise specified. Recommended Operating Conditions (Note 1) DC Supply Voltage (Vdd) 3V to 15Vdc Input Voltage (Vin) 0V to Vdd Vdc Operating Temperature Range (TA) CD4528BM Note 1: -55 C to +125 C Vss = 0V unless otherwise specified. 3 MICROCIRCUIT DATA SHEET MNCD4528BM-X REV 1A0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vss = 0V SYMBOL Idd PARAMETER Quiescent Device Current CONDITIONS NOTES PINNAME MIN Vdd = 5V Voh Vil Vih Logical "1" Output Voltage Logical "0" Input Voltage Logical "1" Input Voltage SUBGROUPS uA 1, 3 150 uA 2 10 uA 1, 3 300 uA 2 20 uA 1, 3 600 uA 2 Vdd = 5V, Iout = +1uA 0.05 V 1, 2, 3 Vdd = 10V, Iout = +1uA 0.05 V 1, 2, 3 Vdd = 15V, Iout = +1uA 0.05 V 1, 2, 3 Vdd = 15V Logical "0" Output Voltage UNIT 5 Vdd = 10V Vol MAX Vdd = 5V, Iout = -1uA 4.95 V 1, 2, 3 Vdd = 10V, Iout = -1uA 9.95 V 1, 2, 3 Vdd = 15V, Iout = -1uA 14.95 V 1, 2, 3 Vdd = 5V, Vout = 0.5V or 4.5V 1 1.5 V 1, 2, 3 Vdd = 10V, Vout = 1.0V or 9.0V 1 3 V 1, 2, 3 Vdd = 15V, Vout = 1.5V or 13.5V 1 4 V 1, 2, 3 Vdd = 5V, Vout = 0.5V or 4.5V 1 3.5 V 1, 2, 3 Vdd = 10V, Vout = 1.0V or 9.0V 1 7 V 1, 2, 3 Vdd = 15V, Vout = 1.5V or 13.5V 1 11 V 1, 2, 3 4 MICROCIRCUIT DATA SHEET MNCD4528BM-X REV 1A0 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vss = 0V SYMBOL Iol PARAMETER Logical "0" Output Current CONDITIONS NOTES Vdd = 5V, Vout = 0.4V Vdd = 10V, Vout = 0.5V Vdd = 15V, Vout = 1.5V Ioh Logical "1" Output Current Vdd = 5V, Vout = 4.6V Vdd = 10V, Vout = 9.5V Vdd = 15V, Vout = 13.5V Iin Input Current Vdd = 15V, Vin = 0V Vdd = 15V, Vin = 15V PINNAME MIN MAX UNIT SUBGROUPS 0.51 mA 1 0.36 mA 2 0.64 mA 3 1.3 mA 1 0.9 mA 2 1.6 mA 3 3.4 mA 1 2.4 mA 2 4.2 mA 3 -0.2 mA 1 -0.14 mA 2 -0.25 mA 3 -0.5 mA 1 -0.35 mA 2 -0.62 mA 3 -1.5 mA 1 -1.1 mA 2 -1.8 mA 3 -0.1 uA 1, 3 -1 uA 2 0.1 uA 1, 3 1 uA 2 AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Cl = 50pF, Rl = 200K Ohms, Input tr = tf = 20nS tr Output Rise Time Vdd = 5V 4 400 nS 9 Vdd = 10V 2 200 nS 9 Vdd = 15V 2 160 nS 9 5 MICROCIRCUIT DATA SHEET MNCD4528BM-X REV 1A0 Electrical Characteristics AC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Cl = 50pF, Rl = 200K Ohms, Input tr = tf = 20nS SYMBOL tf PARAMETER Output Fall Time CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS Vdd = 5V 4 200 nS 9 Vdd = 10V 2 100 nS 9 Vdd = 15V 2 80 nS 9 tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 5V, Cx = 15pF, Rx = 5K Ohms 3 500 nS 9 tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 5V, Cx = 15pF, Rx = 5K Ohms 3 700 nS 10 tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 5V, Cx = 15pF, Rx = 5K Ohms 3 400 nS 11 tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 10V, Cx = 15pF, Rx = 5K Ohms 2 250 nS 9 tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 10V, Cx = 15pF, Rx = 5K Ohms 2 350 nS 10 tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 10V, Cx = 15pF, Rx = 5K Ohms 2 200 nS 11 tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 15V, Cx = 15pF, Rx = 5K Ohms 2 150 nS 9 tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 15V, Cx = 15pF, Rx = 5K Ohms 2 210 nS 10 tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 15V, Cx = 15pF, Rx = 5K Ohms 2 120 nS 11 tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 5V, Cx = 100pF, Rx = 10K Ohms 3 500 nS 9 tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 5V, Cx = 100pF, Rx = 10K Ohms 3 700 nS 10 tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 5V, Cx = 100pF, Rx = 10K Ohms 3 400 nS 11 tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 10V, Cx = 100pF, Rx = 10K Ohms 2 250 nS 9 6 MICROCIRCUIT DATA SHEET MNCD4528BM-X REV 1A0 Electrical Characteristics AC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Cl = 50pF, Rl = 200K Ohms, Input tr = tf = 20nS SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 10V, Cx = 100pF, Rx = 10K Ohms 2 350 nS 10 tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 10V, Cx = 100pF, Rx = 10K Ohms 2 200 nS 11 tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 15V, Cx = 100pF, Rx = 10K Ohms 2 150 nS 9 tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 15V, Cx = 100pF, Rx = 10K Ohms 2 210 nS 10 tPLH Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 15V, Cx = 100pF, Rx = 10K Ohms 2 120 nS 11 tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 5V, Cx = 15pF, Rx = 5K Ohms 3 500 nS 9 tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 5V, Cx = 15pF, Rx = 5K Ohms 3 700 nS 10 tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 5V, Cx = 15pF, Rx = 5K Ohms 3 400 nS 11 tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 10V, Cx = 15pF, Rx = 5K Ohms 2 250 nS 9 tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 10V, Cx = 15pF, Rx = 5K Ohms 2 350 nS 10 tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 10V, Cx = 15pF, Rx = 5K Ohms 2 200 nS 11 tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 15V, Cx = 15pF, Rx = 5K Ohms 2 150 nS 9 tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 15V, Cx = 15pF, Rx = 5K Ohms 2 210 nS 10 tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 15V, Cx = 15pF, Rx = 5K Ohms 2 120 nS 11 tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 5V, Cx = 100pF, Rx = 10K Ohms 3 500 nS 9 7 MICROCIRCUIT DATA SHEET MNCD4528BM-X REV 1A0 Electrical Characteristics AC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Cl = 50pF, Rl = 200K Ohms, Input tr = tf = 20nS SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 5V, Cx = 100pF, Rx = 10K Ohms 3 700 nS 10 tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 5V, Cx = 100pF, Rx = 10K Ohms 3 400 nS 11 tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 10V, Cx = 100pF, Rx = 10K Ohms 2 250 nS 9 tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 10V, Cx = 100pF, Rx = 10K Ohms 2 350 nS 10 tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 10V, Cx = 100pF, Rx = 10K Ohms 2 200 nS 11 tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 15V, Cx = 100pF, Rx = 10K Ohms 2 150 nS 9 tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 15V, Cx = 100pF, Rx = 10K Ohms 2 210 nS 10 tPHL Turn-Off, Turn-On Delay A or B to Q or Q Vdd = 15V, Cx = 100pF, Rx = 10K Ohms 2 120 nS 11 tPW(in) Minimum Input Pulse Width A or B Vdd = 5V, Cx = 15pF, Rx = 5K Ohms 1 150 nS 9 Vdd = 10V, Cx = 15pF, Rx = 5K Ohms 2 50 nS 9 Vdd = 15V, Cx = 15pF, Rx = 5K Ohms 2 50 nS 9 Vdd = 5V, Cx = 1000pF, Rx = 10K Ohms 1 150 nS 9 Vdd = 10V, Cx = 1000pF, Rx = 10K Ohms 2 50 nS 9 Vdd = 15V, Cx = 1000pF, Rx = 10K Ohms 2 50 nS 9 8 MICROCIRCUIT DATA SHEET MNCD4528BM-X REV 1A0 Electrical Characteristics AC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Cl = 50pF, Rl = 200K Ohms, Input tr = tf = 20nS SYMBOL PARAMETER tPLH Reset Propagation Delay Time CONDITIONS NOTES Vdd = 5V, Cx = 15pF, Rx = 5K Ohms Vdd = 10V, Cx = 15pF, Rx = 5K Ohms Vdd = 15V, Cx = 15pF, Rx = 5K Ohms tPHL Reset Propagation Delay Time Vdd = 5V, Cx = 15pF, Rx = 5K Ohms Vdd = 10V, Cx = 15pF, Rx = 5K Ohms Vdd = 15V, Cx = 15pF, Rx = 5K Ohms PINNAME MIN MAX UNIT SUBGROUPS 3 600 nS 9 3 840 nS 10 3 480 nS 11 2 225 nS 9 2 315 nS 10 2 180 nS 11 2 170 nS 9 2 240 nS 10 2 135 nS 11 3 600 nS 9 3 840 nS 10 3 480 nS 11 2 225 nS 9 2 315 nS 10 2 180 nS 11 2 170 nS 9 2 240 nS 10 2 135 nS 11 tPW(out) Output Pulse Width Q or Q Vdd = 5V, Cx = 10,000pF, Rx = 10K Ohms 4 15 45 uS 9 tPW(out) Output Pulse Width Q or Q Vdd = 10V, Cx = 10,000pF, Rx = 10K Ohms 2 10 90 uS 9 tPW(out) Output Pulse Width Q or Q Vdd = 15V, Cx = 10,000pF, Rx = 10K Ohms 2 15 95 uS 9 tPW(match) Pulse Width Match Between Circuits In the Same Pkg. Vdd = 5V, Cx = 10,000pF, Rx = 10K Ohms 4 25 % 9 Vdd = 10V, Cx = 10,000pF, Rx = 10K Ohms 2 35 % 9 Vdd = 15V, Cx = 10,000pF, Rx = 10K Ohms 2 35 % 9 Note Note Note Note 1: 2: 3: 4: Parameter tested go-no-go only. Guaranteed parameter not tested. Tested at 25 C; guaranteed but not tested at +125 C and -55 C. Guaranteed not tested. 9 MICROCIRCUIT DATA SHEET MNCD4528BM-X REV 1A0 Revision History Rev ECN # 1A0 M0002615 02/25/98 Rel Date Originator Changes Donald B. Miller Initial release of the MDS. Conversion from RETS14528 rev B. Removed the DC drift limits (IDD, IOL and IOH). Changed note 4 from "guaranteed for level B, tested for level S" to "guaranteed but not tested". 10