MURHB860CT Preferred Device MEGAHERTZ Power Rectifier D2PAK Power Surface Mount Package Designed for use in switching power supplies, inverters and as free wheeling diodes, these state–of–the–art devices have the following features: • • • • • • • • • http://onsemi.com ULTRAFAST RECTIFIER 8.0 AMPERES 600 VOLTS Package Designed for Power Surface Mount Applications Ultrafast 35 Nanosecond Recovery Times 175°C Operating Junction Temperature Epoxy Meets UL94, VO @ 1/8″ High Temperature Glass Passivated Junction High Voltage Capability to 600 Volts Low Leakage Specified @ 150°C Case Temperature Short Heat Sink Tab Manufactured — Not Sheared! Similar in Size to Industry Standard TO–220 Package 1 4 3 Mechanical Characteristics • Case: Epoxy, Molded • Weight: 1.7 grams (approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • • • • 4 Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Shipped 50 units per plastic tube Available in 24 mm Tape and Reel, 800 units per reel by adding a “T4” suffix to the part number Marking: UH860 1 3 D2PAK CASE 418B STYLE 3 MARKING DIAGRAM MAXIMUM RATINGS (Per Leg) Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 600 V Average Rectified Forward Current (Rated VR, TC = 120°C) Total Device IF(AV) 4.0 8.0 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 120°C) IFM 8.0 A Non–Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM 100 A Rating Operating Junction and Storage Temperature Range UH860 UH860 = Device Code ORDERING INFORMATION TJ, Tstg °C –65 to +175 Device Package Shipping MURHB860CT D2PAK 50 Units/Rail MURHB860CTT4 D2PAK 800/Tape & Reel Preferred devices are recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 2000 October, 2000 – Rev. 1 1 Publication Order Number: MURHB860CT/D MURHB860CT THERMAL CHARACTERISTICS (Per Leg) Rating Symbol Value Unit Maximum Thermal Resistance, Junction to Case RθJC 3.0 °C/W Maximum Thermal Resistance, Junction to Ambient RθJA 50 °C/W Symbol Max Unit Maximum Instantaneous Forward Voltage (Note 1.) (iF = 4.0 Amps, TC = 150°C) (iF = 4.0 Amps, TC = 25°C) vF 2.5 2.8 Volts Maximum Instantaneous Reverse Current (Note 1.) (Rated dc Voltage, TC = 150°C) (Rated dc Voltage, TC = 25°C) iR 500 10 µA Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amps/µs) trr 35 ns ELECTRICAL CHARACTERISTICS (Per Leg) Characteristic 1. Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤2.0% http://onsemi.com 2 MURHB860CT PACKAGE DIMENSIONS D2PAK CASE 418B–03 ISSUE D C E V –B– 4 A 1 2 3 DIM A B C D E G H J K S V S –T– SEATING PLANE K J G D 3 PL 0.13 (0.005) H M T B NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. M INCHES MIN MAX 0.340 0.380 0.380 0.405 0.160 0.190 0.020 0.035 0.045 0.055 0.100 BSC 0.080 0.110 0.018 0.025 0.090 0.110 0.575 0.625 0.045 0.055 STYLE 3: PIN 1. 2. 3. 4. http://onsemi.com 3 ANODE CATHODE ANODE CATHODE MILLIMETERS MIN MAX 8.64 9.65 9.65 10.29 4.06 4.83 0.51 0.89 1.14 1.40 2.54 BSC 2.03 2.79 0.46 0.64 2.29 2.79 14.60 15.88 1.14 1.40 MURHB860CT MEGAHERTZ is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada Email: [email protected] Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada N. American Technical Support: 800–282–9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor – European Support German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET) Email: ONlit–[email protected] French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET) Email: ONlit–[email protected] English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT) Email: [email protected] CENTRAL/SOUTH AMERICA: Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST) Email: ONlit–[email protected] Toll–Free from Mexico: Dial 01–800–288–2872 for Access – then Dial 866–297–9322 ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001–800–4422–3781 Email: ONlit–[email protected] JAPAN: ON Semiconductor, Japan Customer Focus Center 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031 Phone: 81–3–5740–2700 Email: [email protected] ON Semiconductor Website: http://onsemi.com EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781 *Available from Germany, France, Italy, UK, Ireland For additional information, please contact your local Sales Representative. http://onsemi.com 4 MURHB860CT/D