SOURCE FTM-5112C

Apr. 9, 2007
1.25G Spring-Latch SFP Transceiver
( For 80km transmission with monitoring function )
Members of FlexonTM Family
‹
Compatible with FDA 21 CFR 1040.10 and
1040.11, Class I
‹
Compatible with Telcordia GR-468-CORE
‹
RoHS compliant
Description
FTM-5112C-SL80iG
SFP
transceiver
is
high
performance, cost effective module supporting
1.25Gbps and 80km transmission distance on SMF.
The transceiver consists of two sections: The
Features
transmitter section incorporates a DFB laser. And
‹
Dual data-rate of 1.25Gbps operation
‹
1550nm DFB laser and PIN photo-detector
‹
Monitoring interface compatible with SFF-8472
‹
SFP MSA package with duplex LC connector
‹
With Spring-Latch for high density application
‹
Very low EMI and excellent ESD protection
‹
+3.3V single power supply
‹
Operating case temperature:-40~+85°C
the receiver section consists of a PIN photodiode
integrated with a trans-impedance preamplifier (TIA).
All modules satisfy class I laser safety requirements.
The optical output can be disabled by a TTL logic
high-level input of Tx Disable. Tx Fault is provided to
indicate that degradation of the laser. Loss of signal
(LOS) output is provided to indicate the loss of an
input optical signal of receiver.
FTM-5112C-SL80iG
provides
an
enhanced
monitoring interface, which allows real-time access
Applications
to device operating parameters such as transceiver
‹
Switch to Switch interface
‹
Switched backplane applications
‹
Router/Server interface
‹
Other optical transmission systems
temperature, laser bias current, transmitted optical
power, received optical power and transceiver
supply voltage. For further information, please refer
to SFP MSA and SFF-8472 Rev 9.5.
FTM-5112C-SL80iG is compliant with RoHS.
Standard
‹
Compatible with SFP MSA
‹
Compatible with SFF-8472
‹
Compatible with IEEE 802.3z
‹
Compatible with FCC 47 CFR Part 15, Class B
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 1 of 10
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2007-6-14 10:15
1.25G Spring-Latch SFP Transceiver
80km transmission, RoHS compliant
Apr. 9, 2007
Regulatory Compliance
The transceivers have been tested according to American and European product safety and electromagnetic
compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer
to FlexonTM regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office
listed at the end of the documentation.
Table 1 - Regulatory Compliance
Feature
Standard
Electrostatic Discharge
MIL-STD-883E
(ESD) to the Electrical PINs
Method 3015.7
Electrostatic Discharge (ESD)
IEC 61000-4-2
to the Duplex LC Receptacle
GR-1089-CORE
Performance
Class 1(>500 V)
Compatible with standards
FCC Part 15 Class B
Electromagnetic
Interference (EMI)
Immunity
Laser Eye Safety
Component Recognition
EN55022 Class B (CISPR 22B)
Compatible with standards
VCCI Class B
IEC 61000-4-3
Compatible with standards
FDA 21CFR 1040.10 and 1040.11
Compatible with Class I laser
EN60950, EN (IEC) 60825-1,2
product.
UL and CSA
Compatible with standards
2002/95/EC 4.1&4.2
RoHS
Compliant with standards note
2005/747/EC
Note:
In light of item 5 in Annex of 2002/95/EC, “Pb in the glass of cathode ray tubes, electronic components and
fluorescent tubes.” and item 13 in Annex of 2005/747/EC , “ Lead and cadmium in optical and filter glass.” ,the
two exemptions are being concerned for Fiberxon’s transceivers, because Fiberxon’s transceivers use glass,
which may contain Pb, for components such as lenses, windows, isolators, and other electronic components.
Absolute Maximum Ratings
Stress in excess of the maximum absolute ratings can cause permanent damage to the module.
Table 2 - Absolute Maximum Ratings
Parameter
Symbol
Min.
Max.
Unit
Storage Temperature
TS
-40
+85
°C
Supply Voltage
VCC
-0.5
3.6
V
-
5
95
%
+5
dBm
Operating Relative Humidity
Input Optical Power
Pmax
Recommended Operating Conditions
Table 3- Recommended Operating Conditions
Parameter
Symbol
Min.
Operating Case Temperature
TC
-40
Power Supply Voltage
VCC
3.13
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Typical
Max.
Unit
+85
°C
3.47
V
Page 2 of 10
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2007-6-14 10:15
1.25G Spring-Latch SFP Transceiver
80km transmission, RoHS compliant
Date Rate
Apr. 9, 2007
Gigabit Ethernet
Fiber Length on 9/125µm SMF
Note
L
1.25
Gbps
80
km
Notes:
The transmission distance is indicative only. Please refer to the Optical Characteristics in Table 4 to calculate
the exact distance based on specific conditions in your application. A 10dB inline optical attenuator should be
inserted between the fiber-optic cable plant and the receiving port on the transceiver whenever the fiber-optic
cable span is less than 25km; or a 5dB inline optical attenuator should be inserted whenever the fiber-optic
cable span is equal to or more than 25km but less than 50km.
Optical and Electrical Characteristics
Table 4 - Optical and Electrical Characteristics (TC=-40 to +85°C, VCC=3.13 to 3.47V)
Parameter
Symbol
Min.
Typical
Max.
Unit
Notes
1550
1580
nm
5
dBm
1
1
Transmitter
Centre Wavelength
λC
1500
Average Output Power
P0ut
0
P0ut@TX Disable Asserted
P0ut
-45
dBm
Spectral Width (-20dB)
∆λ
1
nm
Extinction Ratio
EX
Rise/Fall Time (20%~80%)
tr/tf
0.26
ns
2
Total Jitter
1.25G
TJ
0.431
UI
3
1.25G
DJ
0.2
UI
3
Deterministic
Jitter
Output Optical Eye
9
IEEE 802.3z Compatible
Data Input Swing Differential
VIN
500
Input Differential Impedance
ZIN
90
TX Disable
TX Fault
dB
100
4
2400
mV
110
Ω
5
Disable
2.0
Vcc
V
Enable
0
0.8
V
2.0
Vcc+0.3
V
0
0.8
V
1580
nm
-22
dBm
6
6
Fault
Normal
Receiver
Centre Wavelength
λC
1260
Receiver Sensitivity
Receiver Overload
-3
dBm
Return Loss
-27
dB
LOS De-Assert
LOSD
LOS Assert
LOSA
LOS Hysteresis
Total Jitter
Deterministic
Jitter
-35
1
dBm
dBm
4
dB
1.25G
TJ
0.749
UI
3
1.25G
DJ
0.462
UI
3
400
2000
mV
5
2.0
Vcc+0.3
V
Data Output Swing Differential
LOS
-23
High
VOUT
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 3 of 10
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2007-6-14 10:15
1.25G Spring-Latch SFP Transceiver
80km transmission, RoHS compliant
Apr. 9, 2007
Low
0
0.8
V
Notes:
1.
The optical power is launched into SMF.
2.
Unfiltered, measured with a PRBS 27-1 test pattern @1.25Gbps
3.
Meet the specified maximum output jitter requirements if the specified maximum input jitter is present.
4.
Measured with a PRBS 27-1 test pattern @1.25Gbps
5.
CML logic, internally AC coupled.
6.
Measured with a PRBS 27-1 test pattern @1.25Gbps, worst-case extinction ratio, BER ≤1×10-12.
EEPROM Information
The SFP MSA defines a 256-byte memory map in EEPROM describing the transceiver’s capabilities,
standard interfaces, manufacturer, and other information, which is accessible over a 2 wire serial interface at
the 8-bit address 1010000X (A0h). The memory contents refer to Table 5.
Table 5 - EEPROM Serial ID Memory Contents (A0h)
Addr.
Field Size
(Bytes)
Name of Field
Hex
Description
0
1
Identifier
03
SFP
1
1
Ext. Identifier
04
MOD4
2
1
Connector
07
LC
3—10
8
Transceiver
00 00 00 02 12 00 01 01
11
1
Encoding
01
8B10B
12
1
BR, nominal
0D
1.25Gbps
13
1
Reserved
00
14
1
Length (9um)-km 50
15
1
Length (9um) FF
16
1
Length (50um) 00
17
1
Length (62.5um) 00
18
1
Length (copper) 00
19
1
Reserved
20—35
16
Vendor name
36
1
Reserved
37—39
3
Vendor OUI
40—55 16
Vendor PN
Transmitter Code
80km
00
46 49 42 45 52 58 4F 4E
“FIBERXON INC. “(ASCⅡ)
20 49 4E 43 2E 20 20 20
00
00 00 00
46 54 4D 2D 35 31 31 32
“FTM-5112C-SL80iG ” (ASCⅡ)
43 2D 53 4C 38 30 45 47
56—59
4
Vendor rev
xx xx 20 20
60-61
2
Wavelength
06 0E
62
1
Reserved
00
63
1
CC BASE
xx
64—65
2
Options
00 1A
66
1
BR, max
00
67
1
BR, min
00
68—83
16
Vendor SN
ASCⅡ( “31 30 20 20” means 1.0 revision)
1550nm
Check sum of bytes 0 - 62
LOS, TX_FAULT and TX_DISABLE
xx xx xx xx xx xx xx xx
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
ASCⅡ
Page 4 of 10
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2007-6-14 10:15
1.25G Spring-Latch SFP Transceiver
80km transmission, RoHS compliant
Apr. 9, 2007
xx xx xx xx xx xx xx xx
84—91
8
92
1
Vendor date codexx xx xx xx xx xx 20 20
Year(2 bytes), Month(2 bytes), Day (2 bytes)
Diagnostic type 68
Diagnostics (Int.Cal)
Diagnostics(Optional Alarm/warning flags,
Enhanced option
93
1
94
1
95
96—255
Soft TX_FAULT and Soft TX_LOS
B0
monitoring)
SFF-8472
02
Diagnostics(SFF-8472 Rev 9.4)
1
CC_EXT
xx
Check sum of bytes 64 - 94
160
Vendor specific
Note: The “xx” byte should be filled in according to practical case. For more information, please refer to the
related document of SFF-8472 Rev 9.5.
Monitoring Specification
The digital diagnostic monitoring interface also defines another 256-byte memory map in EEPROM, which
makes use of the 8 bit address 1010001X (A2h). Please see Figure 1. For detail EEPROM information,
please refer to the related document of SFF-8472 Rev 9.5. The monitoring specification of this product is
described in Table 6.
Figure 1, EEPROM Memory Map Specific Data Field Descriptions
Table 6 - Monitoring Specification
Range
Accuracy
Calibration*
-40 to +95°C
±3°C
Internal
Voltage
3.0 to 3.6V
±3%
Internal
Bias Current
0 to 100mA
±10%
Internal
TX Power
0 to 5dBm
±3dB
Internal
RX Power
-22 to -3dBm
±3dB
Internal
Parameter
Temperature
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 5 of 10
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2007-6-14 10:15
1.25G Spring-Latch SFP Transceiver
80km transmission, RoHS compliant
Apr. 9, 2007
Recommended Host Board Power Supply Circuit
Figure 2 shows the recommended host board power supply circuit.
Figure 2, Recommended Host Board Power Supply Circuit
Recommended Interface Circuit
Figure 3 shows the recommended interface circuit.
Host Board
SFP Module
Vcc (+3.3V)
VccT
10K Ω
2×4.7K to 10KΩ
TX Disable
TX Fault
Protocol
IC
SERDES
IC
SerDat Out +
Z=50Ω
TD +
SerDat Out -
Z=50Ω
TD -
SerDat In +
Z=50Ω
SerDat In -
Z=50Ω
Laser
driver
RD +
Amplifier
RD -
LOS
Vcc (+3.3V)
3×4.7K to 10KΩ
MOD-DEF2
EEPROM
MOD-DEF1
MOD-DEF0
RGND
Figure 3, Recommended Interface Circuit
PIN Definitions
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 6 of 10
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2007-6-14 10:15
1.25G Spring-Latch SFP Transceiver
80km transmission, RoHS compliant
Apr. 9, 2007
Figure 4 below shows the PIN numbering of SFP electrical interface. The PIN functions are described in Table
7 with some accompanying notes.
P in 2 0
T O P V IE W
OF BOARD
P in 1 1
P in 1 0
B O T T O M V IE W
OF BOARD
P in 1
Figure 4, PIN View
Table 7– PIN Function Definitions
PIN No.
Name
1
VeeT
2
TX Fault
3
Function
Plug Seq.
Notes
Transmitter Ground
1
Transmitter Fault Indication
3
Note 1
TX Disable
Transmitter Disable
3
Note 2
4
MOD-DEF2
Module Definition 2
3
Note 3
5
MOD-DEF1
Module Definition 1
3
Note 3
6
MOD-DEF0
Module Definition 0
3
Note 3
7
Rate Select
Not Connected
3
8
LOS
Loss of Signal
3
9
VeeR
Receiver Ground
1
10
VeeR
Receiver Ground
1
11
VeeR
Receiver Ground
1
12
RD-
Inv. Received Data Out
3
Note 5
13
RD+
Received Data Out
3
Note 5
14
VeeR
Receiver Ground
1
15
VccR
Receiver Power
2
16
VccT
Transmitter Power
2
17
VeeT
Transmitter Ground
1
18
TD+
Transmit Data In
3
Note 6
19
TD-
Inv. Transmit Data In
3
Note 6
20
VeeT
Transmitter Ground
1
Note 4
Notes:
1. TX Fault is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor on the host
board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates a
laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.
2. TX Disable is an input that is used to shut down the transmitter optical output. It is pulled up within the
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 7 of 10
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2007-6-14 10:15
1.25G Spring-Latch SFP Transceiver
80km transmission, RoHS compliant
Apr. 9, 2007
module with a 4.7k~10kΩ resistor. Its states are:
Low (0~0.8V):
Transmitter on
(>0.8V, <2.0V):
Undefined
High (2.0~3.465V):
Transmitter Disabled
Open:
Transmitter Disabled
3. MOD-DEF 0,1,2 are the module definition PINs. They should be pulled up with a 4.7k~10kΩ resistor on
the host board. The pull-up voltage shall be VccT or VccR.
MOD-DEF 0 is grounded by the module to indicate that the module is present
MOD-DEF 1 is the clock line of two wire serial interface for serial ID
MOD-DEF 2 is the data line of two wire serial interface for serial ID
4. LOS is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor on the host board to
a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
In the low state, the output will be pulled to less than 0.8V.
5. These are the differential receiver output. They are internally AC-coupled 100Ω differential lines which
should be terminated with 100Ω (differential) at the user SERDES.
6. These are the differential transmitter inputs. They are AC-coupled, differential lines with 100Ω differential
termination inside the module.
Mechanical Design Diagram
The mechanical design diagram is shown in Figure 5.
Figure 5, Mechanical Design Diagram of the SFP with Spring- Latch
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 8 of 10
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2007-6-14 10:15
1.25G Spring-Latch SFP Transceiver
80km transmission, RoHS compliant
Apr. 9, 2007
Ordering information
5
FTM
1
1
2
80
SL
C
i
G
Distance
Other
80: 80KM
G: RoHS compliance
Temperature
i: industrial temp
Package
Wavelength
5 : 1550nm
Receptacle
C : LC
Function
1 : Monitoring
SL: SFP with Spring- Latch
Data rate
12: 1.25G
Part No.
FTM-5112C-SL80iG
Product Description
1550nm, 1.25, 80km, RoHS compliant, SFP with Spring-Latch, -40°C~+85°C
Related Documents
For further information, please refer to the following documents:
■
Fiberxon Spring-Latch SFP Installation Guide
■
Fiberxon SFP Application Notes
■
SFP Multi-Source Agreement (MSA)
Obtaining Document
You can visit our website:
http://www.fiberxon.com
Or contact with Fiberxon, Inc. America Sales Office listed at the end of documentation to get the latest
documents.
Revision History
Revision
Rev. 1a
Initiate
Review
Approve
Henry.xiao
Simon.Jiang
Walker.Wei
Subject
Release Date
Initial datasheet
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Apr 9, 2006
Page 9 of 10
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2007-6-14 10:15
1.25G Spring-Latch SFP Transceiver
80km transmission, RoHS compliant
Apr. 9, 2007
© Copyright Fiberxon Inc. 2007
All Rights Reserved.
All information contained in this document is subject to change without notice. The products described in this
document are NOT intended for use in implantation or other life support applications where malfunction may
result in injury or death to persons.
The information contained in this document does not affect or change Fiberxon product specifications or
warranties. Nothing in this document shall operate as an express or implied license or indemnity under the
intellectual property rights of Fiberxon or third parties. All information contained in this document was obtained
in specific environments, and is presented as an illustration. The results obtained in other operating
environment may vary.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN ”AS IS” BASIS. In no event
will Fiberxon be liable for damages arising directly from any use of the information contained in this document.
Contact
U.S.A. Headquarter:
5201 Great America Parkway, Suite 340
Santa Clara, CA 95054
U. S. A.
Tel: 408-562-6288
Fax: 408-562-6289
Or visit our website: http://www.fiberxon.com
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 10 of 10
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2007-6-14 10:15