60-130 WATT DESKTOP POWER ADAPTERS DESCRIPTION PUP60/80/130 SERIES (LVD+EMC) The PUP60/80/130 series of AC/DC switching power supplies are for 60 to 130 watts of continuous output power. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC 320 inlet to mate with interchangeable cord for world-wide use. An on/off switch can be added at request. All models meet CISPR 22 and FCC class B emission limits, and comply with UL, CSA, IEC and CE requirements. F E ATU R E S ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ Optional output connectors Optional on/off switch 100﹪ burn-in at full rated load Auto-ranging input Input surge current protection Overvoltage protection Overcurrent protection Thermal protection S a f e t y St a n d a r d A p p ro v a ls ： UL 60950-1 CSA C22.2 No. 60950-1 INPUT SPECIFICATIONS Input voltage： Input frequency： Input current： PUP60/80 Series: PUP130 Series: Leakage current： 9 0 t o 1 3 0 VA C o r 1 8 0 t o 2 6 0 VA C (auto-ranging) 47 to 63 Hz 1 . 8 A （ r m s ） f o r 11 5 VA C 1 . 0 A （ r m s ） f o r 2 3 0 VA C 3 . 0 m A ( r m s ) f o r 11 5 VA C 1 . 7 A （ r m s ） f o r 2 3 0 VA C 0 . 4 0 m A m a x . @ 11 5 VA C , 6 0 H z 0 . 8 0 m A m a x . @ 2 3 0 VA C , 5 0 H z OUTPUT SPECIFICATIONS Output voltage/current： Output power range： Ripple and noise： Overvoltage protection： See rating chart See rating chart 1﹪ peak to peak maximum Provided on output; set at 112 132﹪ of its nominal output voltage Overcurrent protection： All outputs protected to short circuit conditions All outputs ±0.04﹪ /℃ maximum Maximum excursion of 4﹪ or better on all models, recovering to 1﹪ of final value within 500us after a 25﹪ step load change Temperature coefficient： Transient response： ENVIRONMENTAL SPECIFICATIONS O p e r a t i n g t e m p e r a t u r e ： 0℃ to +40℃ (PUP60/80 series) 0℃ to +50℃ (PUP130 series) St o r a g e t e m p e r a t u r e ： -40℃ Relative humidity： 5﹪ to +85℃ to 95﹪ non-condensing TÜV EN60950-1 GENERAL SPECIFICATIONS Switching frequency： 60KHz to 75KHz Efficiency： 70 ﹪ minimum on Vo ≧ 12V , 65% minimum on the others Hold-up time： PUP60/80 SERIES: 15 msec minimum at 110VAC PUP130 SERIES: 10 msec minimum at 110VAC Line regulation： ±0.5﹪ maximum at full load Inrush current： 15 amps @ 115VAC, or 30 amps @ 230VAC, at 25℃ cold start Withstand voltage： 3000VAC from input to output 1500VAC from input to ground 500VAC from output to ground MTBF： PUP60/PUP80 300,000 hours minimum, PUP130 400,000 hours minimum at full load at 25℃ ambient, calculated per MIL-HDBK-217F, excluding DC fan. EMC performance (EN55024) EN55022: Class B conducted, class B radiated FCC: Class B conducted, Class B radiated VCCI: Class B conducted, Class B radiated EN61000-3-2: Harmonic distortion, Class A EN61000-3-3: Line flicker EN61000-4-2: ESD, ± 8KV air and ± 4KV contact EN61000-4-3: Radiated immunity, 3V/m EN61000-4-4: Fast transient/burst, ± 1KV EN61000-4-5: Surge, ± 1KV diff., ± 2KV com. EN61000-4-6: Conducted immunity, 3Vrms EN61000-4-8: Magnetic field immunity, 1A/m E N 6 1 0 0 0 - 4 - 11 : Voltage dips, 30 ﹪ reduction for 500ms and >95﹪ reduction for 10ms Tumbler Technologies + TRUMPower 3 3 5 0 S c o t t B l vd . , B l d g . 1 3 , S a n ta C l a r a , C a l i f o r n i a 9 5 0 5 4 , U S A P h o n e : 4 0 8 - 9 8 8 - 6 6 1 6 ● s a l e s @ t r u m p o w e r. c o m ● w w w.T R U M Po w e r.c o m AUTORANGING INPUT PUP60/PUP80/PUP130 SERIES OUTPUT VOLTAGE/CURRENT RATING CHART Output Vnom. Model Imin. Imax. Output Power Tol. PUP60-10 5V 0A 12A 5% 60W PUP60-10-1 7V 0A 8.6A 5% 60W PUP60-11 10V 0A 6A 5% 60W PUP80-12 12V 0A 6.7A 4% 80W PUP80-13 15V 0A 5.3A 3% 80W PUP80-13-1 18V 0A 4.5A 3% 80W PUP80-14 24V 0A 3.4A 3% 80W PUP80-16 30V 0A 2.7A 2% 80W PUP80-17 36V 0A 2.3A 2% 80W PUP80-18 48V 0A 1.7A 2% 80W PUP130-12 12V 0A 10.8A 5% 130W PUP130-13 15V 0A 8.6A 4% 130W PUP130-13-1 18V 0A 7.2A 4% 130W PUP130-14 24V 0A 5.4A 3% 130W PUP130-16 30V 0A 4.3A 3% 130W PUP130-17 36V 0A 3.6A 2% 130W PUP130-18 48V 0A 2.7A 2% 130W Notes: (1) PUP60 and PUP80 series are without, while PUP130 series are with, built-in fan. (2) PUP60 series are with remote sense. The other series can also be equipped with remote sense. Please consult factory. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 1.0 Kgs (2.2 Lbs.) approx. 4. See pages 6-19 to 6-26 for optional output connectors. Add the suffix assigned for a selected connector to a wanted model number, e.g. PUP130-14-HA, for ordering. 5. To order a model with on/off switch, add suffix “S” to the model number, e.g. PUP130-14-HA-S. PIN CHART PIN 1 2 3 4 5 6 7 8 MODEL PUP60-10 PUP60-11 PUP80-12 PUP80-13-1 PUP80-16 PUP80-18 PUP130-13 PUP130-14 PUP130-17 PUP60-10-1 PUP80-13 PUP80-14 PUP80-17 PUP130-12 PUP130-13-1 PUP130-16 PUP130-18 RETURN -SENSE OUTPUT OUTPUT OUTPUT RETURN RETURN +SENSE +V +V +V RETURN RETURN OUTPUT OUTPUT OUTPUT OUTPUT RETURN RETURN +V +V +V +V Tumbler Technologies + TRUMPower 3 3 5 0 S c o t t B l vd . , B l d g . 1 3 , S a n ta C l a r a , C a l i f o r n i a 9 5 0 5 4 , U S A P h o n e : 4 0 8 - 9 8 8 - 6 6 1 6 ● s a l e s @ t r u m p o w e r. c o m ● w w w.T R U M Po w e r.c o m