MARL 652-105-63

FEATURES
PROFESSIONAL LED INDICATORS Ø12.7mm Mounting
652 SERIES
l
Each product will operate over a wide voltage
input range
PACK QUANTITY = 10 PIECES
l
Black anodised aluminium housing
l
180° viewing angle
l
Full internal potting to resist shock and vibration
l
Sealed to IP67
l
True Bi-polar product
SPECIFICATIONS
Ordering Information & Typical Technical Characteristics (Ta = 25°C)
Mean Time Between Failure = 100,000 Hours.
PART NUMBER
COLOUR
Luminous intensity figures refer to the unmodified discrete LED.
LENS
VOLTAGE
DC (Vdc)
Vopr
CURRENT
DC (mA)
lopr
LUMINOUS
INTENSITY
lv@20mA (mcd)
WAVE
OPERATING
STORAGE
LENGTH
TEMP
TEMP
λp (nm)
Topr
Tstg
HIGH INTENSITY
652-105-63
Red
Colour Diffused
12-28
6-16
100
627
-40 ~ +85^
-40 ~ +85
Yes
652-102-63
Red (GaAlAs)
Colour Diffused
12-28
6-16
450
660
-40 ~ +85^
-40 ~ +85
Yes
652-111-63
Yellow
Colour Diffused
12-28
6-16
50
590
-40 ~ +85^
-40 ~ +85
Yes
652-114-63
Green
Colour Diffused
12-28
6-16
60
565
-40 ~ +85^
-40 ~ +85
Yes
652-105-75
Red
Colour Diffused
110Vac
6
100
627
-40 ~ +85^
-40 ~ +85
Yes
652-102-75
Red (GaAlAs)
Colour Diffused
110Vac
6
450
660
-40 ~ +85^
-40 ~ +85
Yes
652-111-75
Yellow
Colour Diffused
110Vac
6
50
590
-40 ~ +85^
-40 ~ +85
Yes
652-114-75
Green
Colour Diffused
110Vac
6
60
565
-40 ~ +85^
-40 ~ +85
Yes
Vac/Vdc
mA
mcd
nm
°C
°C
UNITS
105,102,111 & 114
^ = Products must be derated according to the derating information. Each derating
graph refers to specific LEDs.
How to Order:
website: www.marl.co.uk • email: [email protected] •
•
Telephone +44 (0)1229 582430
•
Fax: +44 (0)1229 585155
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service.
for products or service.
Marl International reserve the right to alter without notice the specification or any conditions of supply
© MARL INTERNATIONAL LTD 2007 : DS 069/07
Issue 2
SAMPLES AVAILABLE
Page 1 of 2
652 Series
All other voltages
20mA to 48Vac/dc
Mounting Hole
Dimensions in mm (Typical)
Mounting hole to be clean and burr free
Not to scale
MATERIALS
PUSH-ON CONNECTORS
Body
Aluminium grade 6063 black anodised
Nut
Stainless Steel grade 303
Panel Seal
Viton
Termination
Copper with silver flash finish
Lock Washer
Zinc plated steel
Fresnel lens
Polycarbonate
Encapsulation
PC5430
Header
Nylon6 A82
925-000-00 is brass tin plated.
For use with 652 series lamps.
Dimensions in mm (Typical)
Not to scale
TECHNICAL CHARACTERISTICS
SERIES
MAXIMUM
PANEL
POWER
DISSIPATION
652
NUT
CUTOUT
MOUNTING
TORQUE
MINIMUM
MOUNTING
CENTRES
MIN/MAX.
PANEL
THICKNESS
825
12.7
1.0
x,y=19.5
1.5-8.0
mW
mm
Nm
mm
mm
How to Order:
website: www.marl.co.uk • email: [email protected] •
•
Telephone +44 (0)1229 582430
•
Fax: +44 (0)1229 585155
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service.
for products or service.
Marl International reserve the right to alter without notice the specification or any conditions of supply
© MARL INTERNATIONAL LTD 2007 : DS 069/07
Issue 2
SAMPLES AVAILABLE
BS EN ISO 9001:2000
Approved Manufacturer
Page 2 of 2