PANJIT GS1A

DATA SHEET
GS1A~GS1M
SURFACE MOUNT RECTIFIER
VOLTAGE- 50 to 1000 Volts CURRENT - 1.0 Ampere
SMA / DO-214AC
Unit: inch ( mm )
FEATURES
.114 (2.90)
.098 (2.50)
• For surface mounted applications
• Low profile package
.062 (1.60)
.055 (1.40)
• Built-in strain relief
• Easy pick and place
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
• Glass passivated chip junction
• High temperature soldering : 260°C /10 seconds at terminals
.181 (4.60)
.157 (4.00)
.012 (.305)
MECHANICAL DATA
.006 (.152)
.096 (2.30)
.078 (2.00)
Case: JEDEC DO-214AC molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Indicated by cathode band
Standard packaging: 12mm tape (EIA-481)
Weight: 0.002 ounce, 0.064 gram
.008(.203)
.002(.051)
.060 (1.52)
.030 (0.76)
.208 (5.28)
.188 (4.80)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOLS
GS1A
GS1B
GS1D
GS1G
GS1J
GS1K
GS1M
UNIT
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
V
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
V
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
100
V
Maximum Average Forward Rectified Current,
at T L =75°C
Peak Forward Surge Current 8.3ms single half sine-wave
I(AV)
1.0
A
superimposed on rated load (JEDEC method)
IFSM
30.0
A
Maximum Instantaneous Forward Voltage at 1.0A
VF
1.10
V
5.0
µA
50.0
µA
Maximum DC Reverse Current
at Rated DC Blocking Voltage
TA=25°C
TA=125°C
IR
Maximum Reverse Recovery Time(Note 1) T J =25°C
TRR
2.5
µs
Typical Junction Capacitance (Note 2)
CJ
12
pF
Maximum Thermal Resistance(Note 3) RθJA
RθJA
30.0
°C/ W
Operating and Storage Temperature Range
TJ,TSTG
NOTES:1. Reverse Recovery Test Conditions: I F =0.5A, I R =1.0A, I rr =0.25A
2. Measured at 1 MHz and applied V r = 4.0 volts.
3. 8.0 mm 2 ( .013mm thick ) land areas.
-55 to +150
°C
INSTANTANEOUS FORWARD CURRENT, AMPERES
RATING AND CHARACTERISTIC CURVES
AVERAGE FORWARD CURRENT
AMPERES
3.0
2.5
SINGLE PHASE HALF WAVE 60Hz
RESISTIVE OR INDUCTIVE LOAD
P.C.B MOUNTED
ON 0.315 X 0.315" ( 8.0 X 8.0mm )
COPPER PAD AREAS
2.0
1.5
1.0
0.5
0
0
50
100
100
40
20
10
4.0
2.0
1.0
0.4
0.2
0.1
0.4
150
O
TEMPERATURE C
Fig. 1- DERATING CURVE FOR OUTPUT RECTIFIED CURRENT
FPRWARD SURGE CURRENT, AMPERES pk
(HALF SINE-WAVE)
100
O
T J =100 C
10
T J =75 OC
1.0
0.1
T J =25 OC
0.01
0.001
0
20
40
60
80
100
120
140
0.8
1.2
1.0
1.4
1.6
1.8
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
Fig. 2- TYPICAL INSTANTANEOUS FORWARD
CHARACTERISITCS PER ELEMENT
30
25
20
15
10
5
0
1
6
2
10
20
40
60
100
NO. OF CYCLES AT 62Hz
Fig. 4- MAXIMUM NON-REPETITEVE PEAK
FORWARD SURGE CURRENT
PERCENT OF PEAK REVERSE VOLTAGE
Fig. 3- TYPICAL REAK REVERSE CHARACTERISTICS
100
100
50
50
O
CAPACITANCE, pF
THERMAL IMPEDANCE( OC/W)
0.6
20
10
2
2
Units Mounted On 20in (5.4mm )
+0.5mil inches(0.013mm)
Thick Copper Land Areas
5
Tj=25 C
f=1.0MHz
Vsig=50mVp-p
20
10
5
2
2
1
0.01
1
0.1
0.1
1.0
10
HEATING TIME(SEC)
Fig. 5- TRANSIENT THERMAL IMPEDANCE
100
1.0
10
100
1000
REVERSE VOLTAGE, VOLTS
Fig. 6- TYPICL JUNCTION CAPACITANCE PER ELEMENT