SEMICONDUCTOR TECHNICAL DATA ELECTRICAL CHARACTERISTICS –30°C + 25°C + 85°C Ch Characteristic i i S b l Symbol Min Max Min Max Min Max U i Unit Power Supply Drain Current IE — — — 56 — — mAdc IinH — — — 350 — — µAdc t–+ t+– t +, t – 0.6 0.6 1.6 1.8 0.6 0.6 1.5 1.7 0.6 0.6 1.7 1.9 0.6 2.2 0.6 2.1 0.6 2.3 Input Current Switching Times Propagation Delay ns Rise Time, Fall Time (10% to 90%) L SUFFIX CERAMIC PACKAGE CASE 620–10 ns LOGIC DIAGRAM AIN1 4 AIN2 BIN1 5 2 AOUT PIN ASSIGNMENT 6 3 BOUT BIN2 7 CIN1 10 14 COUT CIN2 11 DIN1 12 15 DOUT DIN2 13 OUT = IN1 + IN2 VCC1 = PIN 1 VCC2 = PIN 16 VEE = PIN 8 tpd = 0.9 ns typ (510 ohm load) = 1.1 ns typ (50 ohm load) PD = 240 mW typ/pkg (No load) Full Load Current, IL = – 25 mAdc max 3/93 Motorola, Inc. 1996 4–354 REV 5 VCC1 1 16 VCC2 AOUT 2 15 DOUT BOUT 3 14 COUT AIN1 4 13 DIN2 AIN2 5 12 DIN1 BIN1 6 11 CIN2 BIN2 7 10 CIN1 VEE 8 9 NC MC1662 OUTLINE DIMENSIONS L SUFFIX CERAMIC DIP PACKAGE CASE 620–10 ISSUE V –A– 16 9 1 8 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 4. DIMENSION F MAY NARROW TO 0.76 (0.030) WHERE THE LEAD ENTERS THE CERAMIC BODY. –B– C L –T– K N SEATING PLANE M E F J G D 16 PL 0.25 (0.010) 16 PL 0.25 (0.010) M T A M T B S DIM A B C D E F G H K L M N INCHES MIN MAX 0.750 0.785 0.240 0.295 ––– 0.200 0.015 0.020 0.050 BSC 0.055 0.065 0.100 BSC 0.008 0.015 0.125 0.170 0.300 BSC 0_ 15 _ 0.020 0.040 MILLIMETERS MIN MAX 19.05 19.93 6.10 7.49 ––– 5.08 0.39 0.50 1.27 BSC 1.40 1.65 2.54 BSC 0.21 0.38 3.18 4.31 7.62 BSC 0_ 15 _ 0.51 1.01 S Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1–800–441–2447 JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315 Mfax: [email protected] – TOUCHTONE 602–244–6609 INTERNET: http://Design–NET.com ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 ◊ MECL Data DL122 — Rev 6 4–355 *MC1650/D* MC1650/D MOTOROLA