MOTOROLA MC1662L

SEMICONDUCTOR TECHNICAL DATA
ELECTRICAL CHARACTERISTICS
–30°C
+ 25°C
+ 85°C
Ch
Characteristic
i i
S b l
Symbol
Min
Max
Min
Max
Min
Max
U i
Unit
Power Supply Drain Current
IE
—
—
—
56
—
—
mAdc
IinH
—
—
—
350
—
—
µAdc
t–+
t+–
t +, t –
0.6
0.6
1.6
1.8
0.6
0.6
1.5
1.7
0.6
0.6
1.7
1.9
0.6
2.2
0.6
2.1
0.6
2.3
Input Current
Switching Times
Propagation Delay
ns
Rise Time, Fall Time
(10% to 90%)
L SUFFIX
CERAMIC PACKAGE
CASE 620–10
ns
LOGIC DIAGRAM
AIN1
4
AIN2
BIN1
5
2 AOUT
PIN ASSIGNMENT
6
3 BOUT
BIN2 7
CIN1 10
14 COUT
CIN2 11
DIN1 12
15 DOUT
DIN2 13
OUT = IN1 + IN2
VCC1 = PIN 1
VCC2 = PIN 16
VEE = PIN 8
tpd = 0.9 ns typ (510 ohm load)
= 1.1 ns typ (50 ohm load)
PD = 240 mW typ/pkg (No load)
Full Load Current, IL = – 25 mAdc max
3/93
 Motorola, Inc. 1996
4–354
REV 5
VCC1
1
16
VCC2
AOUT
2
15
DOUT
BOUT
3
14
COUT
AIN1
4
13
DIN2
AIN2
5
12
DIN1
BIN1
6
11
CIN2
BIN2
7
10
CIN1
VEE
8
9
NC
MC1662
OUTLINE DIMENSIONS
L SUFFIX
CERAMIC DIP PACKAGE
CASE 620–10
ISSUE V
–A–
16
9
1
8
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION L TO CENTER OF LEAD WHEN
FORMED PARALLEL.
4. DIMENSION F MAY NARROW TO 0.76 (0.030)
WHERE THE LEAD ENTERS THE CERAMIC
BODY.
–B–
C
L
–T–
K
N
SEATING
PLANE
M
E
F
J
G
D
16 PL
0.25 (0.010)
16 PL
0.25 (0.010)
M
T A
M
T B
S
DIM
A
B
C
D
E
F
G
H
K
L
M
N
INCHES
MIN
MAX
0.750
0.785
0.240
0.295
–––
0.200
0.015
0.020
0.050 BSC
0.055
0.065
0.100 BSC
0.008
0.015
0.125
0.170
0.300 BSC
0_
15 _
0.020
0.040
MILLIMETERS
MIN
MAX
19.05
19.93
6.10
7.49
–––
5.08
0.39
0.50
1.27 BSC
1.40
1.65
2.54 BSC
0.21
0.38
3.18
4.31
7.62 BSC
0_
15 _
0.51
1.01
S
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution;
P.O. Box 5405, Denver, Colorado 80217. 1–800–441–2447
JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center,
3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315
Mfax: [email protected] – TOUCHTONE 602–244–6609
INTERNET: http://Design–NET.com
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
◊
MECL Data
DL122 — Rev 6
4–355
*MC1650/D*
MC1650/D
MOTOROLA