SSR2010J Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 20 AMPS 100 VOLTS SCHOTTKY RECTIFER Designer’s Data Sheet FEATURES: • • • • • • • • • • • PIV: 100 Volts Average Output Current 25 Amps Low Reverse Leakage Current Low Forward Voltage Drop Guard Ring for Overvoltage Protection Isolated Hermetically Sealed Package Custom Lead Forming Available Eutectic Die Attach Ultrasonic Aluminum Wire Bonds 175°C Operating Junction Temperature TX, TXV, and Space Level Screening Available. Consult Factory. TO-257(J) MAXIMUM RATINGS 1/ Peak Repetitive Reverse Voltage and DC Blocking Voltage Average Rectified Forward Current 2/ (Resistive Load, 60 Hz, Sine Wave, TA = 25°C) Peak Surge Current 2/ (8.3 ms Pulse, Half Sine Wave, Superimposed on Io, Allow Junction to reach equilibrium between pulses, TA = 25°C) Operating and Storage Temperature Maximum Thermal Resistance (Junction to Case) Symbol Value Unit VRRM VRWM VR 100 Volts IO 20 Amps IFSM 300 Amps TOP & Tstg -65 to +175 RθJC 1.0 2/ ° ° C C/W Available in the Following Configurations: Rectifier: SSR2010J, SSR2010JDB, and SSR2010JUB Common Cathode Centertap: SSR2010CTJ, SSR2010CTJDB, and SSR2010CTJUB (See Data Sheet RS0073) Common Anode Centertap: SSR2010CAJ, SSR2010CAJDB, and SSR2010CAJUB (See Data Sheet RS0073) NOTE: 1/ 2/ at room temperature, unless otherwise specified pins 2 and 3 connected together NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0087G DOC Solid State Devices, Inc. SSR2010J Series 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS (per leg) Instantaneous Forward Voltage Drop (TA = 25°C, 300 µs Pulse) Instantaneous Forward Voltage Drop (TA = -55°C, 300 µs Pulse) Reverse Leakage Current (Rated VR, 300 µs pulse minimum) Junction Capacitance (VR = 10 Vdc, TA = 25°C, f = 1MHz) CASE OUTLINE: TO-257 (Suffix J) Symbol Max Unit IF = 10 A IF = 15 A IF = 20 A VF1 VF2 VF3 0.8 0.97 1.00 Volts IF = 10 A VF4 0.93 Volts TA = 25°C TC = 100°C IR1 IR2 200 10 µA mA CJ 800 pf TO-257 with Bent Down Leads (JDB Suffix) PIN OUT: Rectifier Configuration PIN 1: CATHODE PIN 2: ANODE PIN 3: ANODE TO-257 with Bent Up Leads (JUB Suffix) NOTE: pins 2 and 3 must be externally connected together for optimal performance TYPICAL OPERATING CURVES o (TA = 25 C, Unless Otherwise Specified) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0087G DOC