NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter General Description Features The NC7WZU04 is a dual unbuffered inverter from Fairchild’s Ultra High Speed Series of TinyLogic® in the space saving SC70 6-lead package. The special purpose unbuffered circuit design is intended for crystal oscillator or analog applications. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs are high impedance when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage. ■ Space saving SC70 6-lead package ■ Ultra small MicroPak™ leadless package ■ Unbuffered for crystal oscillator and analog applications ■ Balanced output drive: ±8mA at 4.5V VCC ■ Broad VCC operating range: 1.65V to 5.5V ■ Low quiescent power: ICC < 1µA at 5V VCC, TA = 25°C Ordering Information Order Number Package Number Package Code Top Mark NC7WZU04P6X MAA06A ZU4 NC7WZU04L6X MAC06A B5 Package Description Supplied As 6-Lead SC70, EIAJ SC88, 1.25mm Wide 3k Units on Tape and Reel 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel Logic Symbol IEEE/IEC A1 1 Y1 Y2 A2 TinyLogic® is a registered trademark of Fairchild Semiconductor Corporation. MicroPak™ is a trademark of Fairchild Semiconductor Corporation. ©2006 Fairchild Semiconductor Corporation NC7WZU04 Rev. 1.0.3 1 www.fairchildsemi.com NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter March 2006 Pin Descriptions Pin Assignment for SC70 A1 1 6 Y1 GND 2 5 VCC A2 3 4 Y2 Pin Name Description A1, A2 Data Inputs Y1, Y2 Outputs Function Table Y=A (Top View) Pin One Orientation Diagram (Top View) AAA Input Output A Y L H H L H = HIGH Logic Level L = LOW Logic Level Pin One AAA represents Product Code Top Mark – see ordering code Note: Orientation of Top Mark determines Pin One location. Read the top product code mark left to right, Pin One is the lower left pin (see diagram). Pad Assignments for MicroPak A1 1 6 Y1 GND 2 5 VCC A2 3 4 Y2 (Top Through View) 2 NC7WZU04 Rev. 1.0.3 www.fairchildsemi.com NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter Connection Diagrams The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Symbol Parameter Rating VCC Supply Voltage −0.5V to +7V VIN DC Input Voltage −0.5V to +7V VOUT DC Output Voltage −0.5V to +7V IIK DC Input Diode Current @ VIN ≤ –0.5V −50mA IOK DC Output Diode Current @ VOUT < –0.5V VOUT > 0.5V, VCC = GND −50mA +50mA IOUT DC Output Current ±50mA ICC/IGND DC VCC/GND Current ±100mA TSTG Storage Temperature −65°C to +150°C TJ Junction Temperature under Bias 150°C TL Junction Lead Temperature (Soldering, 10 seconds) 260°C PD Power Dissipation @ +85°C 180mW Recommended Operating Conditions(1) Symbol Parameter Rating VCC Supply Voltage Operating 1.8V to 5.5V VCC Supply Voltage Data Retention 1.5V to 5.5V VIN Input Voltage 0V to 5.5V VOUT Output Voltage 0V to VCC TA Operating Temperature θJA Thermal Resistance −40°C to +85°C 350°C/W Note: 1. Unused inputs must be held HIGH or LOW. They may not float. 3 NC7WZU04 Rev. 1.0.3 www.fairchildsemi.com NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter Absolute Maximum Ratings TA = -40°C to +85°C +25°C Symbol VIH VIL VOH VCC (V) Min HIGH Level Input Voltage Parameter 1.8 to 2.7 0.85 VCC 0.85 VCC 3.0 to 5.5 0.8 VCC 0.8 VCC LOW Level Input Voltage 1.8 to 2.7 0.15 VCC 0.15 VCC 3.0 to 5.5 0.2 VCC 0.2 VCC HIGH Level Output Voltage Conditions VIN = VIL VIN = GND VOL LOW Level Output Voltage VIN = VIH VIN = VCC IOH = -100µA Typ Max Min 1.65 1.55 1.65 1.55 1.8 1.6 1.79 1.6 2.3 2.1 2.29 2.1 3.0 2.7 2.99 2.7 4.5 4.0 4.48 4.0 IOH = -2mA 1.65 1.29 1.52 1.29 IOH = -2mA 2.3 1.9 2.19 1.9 IOH = -4mA 3.0 2.4 2.82 2.4 IOH = -6mA 3.0 2.3 2.73 2.3 IOH = -8mA 4.5 3.8 4.24 3.8 IOL = 100µA 1.65 0.01 0.2 Max V V V V 0.2 1.8 0.01 0.2 0.2 2.3 0.01 0.2 0.2 3.0 0.01 0.3 0.3 4.5 0.01 0.5 0.5 IOL = 2mA 1.65 0.10 0.24 0.24 IOL = 2mA 2.3 0.12 0.3 0.3 IOL = 4mA 3.0 0.19 0.4 0.4 IOL = 6mA 3.0 0.29 0.55 0.55 4.5 0.29 IOL = 8mA Units V V 0.55 0.55 IIN Input Leakage Current VIN = 5.5V, GND 0 to 5.5 ±0.1 ±1.0 µA ICC Quiescent Supply Current VIN = 5.5V, GND 1.65 to 5.5 1.0 10 µA VOUT = Open VIN = Adjust for Peak ICC Current 1.8 0.2 2.5 2 3.3 5 5.0 15 ICCPEAK Peak Supply Current in Analog Operation 4 NC7WZU04 Rev. 1.0.3 mA www.fairchildsemi.com NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter DC Electrical Characteristics TA = +25˚C Symbol Parameter tPLH, tPHL Propagation Delay Conditions CIN Input Capacitance CPD Power Dissipation Capacitance Min Typ Max Min Max 1.65 1.5 5.5 9.8 1.5 11.0 1.8 1.5 4.6 8.1 1.5 8.9 2.5 ± 0.2 1.2 3.3 5.7 1.2 6.3 3.3 ± 0.3 0.8 2.7 4.1 0.8 4.5 5.0 ± 0.5 0.5 2.2 3.3 0.5 3.6 3.3 ± 0.3 1.2 4.0 6.4 1.2 7.0 5.0 ± 0.5 0.8 3.4 5.6 0.8 6.2 CL = 15pF, RL = 1MΩ CL = 50pF, RL = 500Ω, –40°C to +85°C VCC (V) Note 2 Figure Units Number ns Figure 1 Figure 3 ns Figure 1 Figure 3 0 3 pF 3.3 3.5 pF 5.0 5.5 Figure 2 Note: 2. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD)(VCC)(fIN) + (ICCstatic). AC Loading and Waveforms VCC Input Output CL* RL tf = 3ns tr = 3ns *CL includes load and stray capacitance. Input PRR = 1.0MHz; tW = 500ns VCC 90% Input Figure 1. AC Test Circuit 90% 50% GND 10% VCC 50% tW tPHL tPLH A 10% VOH Output Input 50% 50% VOL Application Note: When operating the NC7WZU04’s unbuffered output stage in its linear range, as in oscillator applications, care must be taken to observe maximum power rating for the device and package. The high drive nature of the design of the output stage will result in substantial simultaneous conduction currents when the stage is in the linear region. See the ICCPEAK specification on page 2. Figure 3. AC Waveforms Input = AC Waveform; tr, tf = 1.8ns; PRR = 10MHz; Duty Cycle = 50% Figure 2. ICCD Test Circuit 5 NC7WZU04 Rev. 1.0.3 www.fairchildsemi.com NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter AC Electrical Characteristics Tape Format for SC70 Package Designator Tape Section Number Cavities Cavity Status Cover Tape Status P6X Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Tape Dimension inches (millimeters) Package Tape Size Dim A Dim B SC70-6 8mm 0.093 (2.35) 0.096 (2.45) Dim F 0.138 ± 0.004 0.053 ± 0.004 (3.5 ± 0.10) (1.35 ± 0.10) 6 NC7WZU04 Rev. 1.0.3 Dim KO Dim P1 Dim W 0.157 (4) 0.315 ± 0.004 (8 ± 0.1) www.fairchildsemi.com NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter Tape and Reel Specification Tape Format for MicroPak Package Designator Tape Section Number Cavities Cavity Status Cover Tape Status L6X Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Tape Dimension inches (millimeters) 7 NC7WZU04 Rev. 1.0.3 www.fairchildsemi.com NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter Tape and Reel Specification (Continued) NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter Tape and Reel Specification (Continued) Reel Dimension for MicroPak inches (millimeters) Tape Size A B C D N W1 W2 W3 8 mm 7.0 (177.8) 0.059 (1.50) 0.512 (13.00) 0.795 (20.20) 2.165 (55.00) 0.331 + 0.059/−0.000 (8.40 + 1.50/−0.00) 0.567 (14.40) W1 + 0.078/−0.039 (W1 + 2.00/−1.00) 8 NC7WZU04 Rev. 1.0.3 www.fairchildsemi.com NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter Physical Dimensions inches (millimeters) unless otherwise noted 6-Lead SC70, EIAJ SC88, 1.25mm Wide Package Number MAA06A 9 NC7WZU04 Rev. 1.0.3 www.fairchildsemi.com NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A 10 NC7WZU04 Rev. 1.0.3 www.fairchildsemi.com The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FAST® ActiveArray™ FASTr™ Bottomless™ FPS™ Build it Now™ FRFET™ CoolFET™ GlobalOptoisolator™ CROSSVOLT™ GTO™ DOME™ HiSeC™ EcoSPARK™ I2C™ 2 E CMOS™ i-Lo™ EnSigna™ ImpliedDisconnect™ FACT™ IntelliMAX™ FACT Quiet Series™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UltraFET® UniFET™ VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I18 11 NC7WZU04 Rev. 1.0.3 www.fairchildsemi.com NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter TRADEMARKS