Part Number: AUG14C2-A 13.8mm (0.54”) 14 SEGMENT DUAL DIGIT ALPHANUMERIC DISPLAY www.SunLED.com Features ● 0.54 INCH CHARACTER HEIGHT. ●LOW CURRENT OPERATION. ●HIGH CONTRAST AND LIGHT OUTPUT. ● EASY MOUNTING ON P.C. BOARDS OR SOCKETS. ● CATEGORIZED FOR LUMINOUS INTENSITY. ● MECHANICALLY RUGGED. ● STANDARD: GRAY FACE, WHITE SEGMENT. ● RoHS COMPLIANT. Operating Characteristics (TA=25°C) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) UG (GaP) Unit UG (GaP) Unit Forward Voltage (Typ.) Per Segment or (DP) (IF=10mA) VF 2.0 V Forward Voltage (Max.) Per Segment or (DP) (IF=10mA) VF 2.5 V IR 10 uA Reverse Voltage Per Segment or (DP) VR 5 V Forward Current Per Segment or (DP) IF 25 mA Reverse Current (Max.) Per Segment or (DP) (VR=5V) λP 565 nm mA Wavelength of Peak Emission (Typ.) (IF=10mA) λD 568 nm mW Wavelength of Dominant Emission (Typ.) (IF=10mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 30 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 pF Forward Current (Peak) Per Segment or (DP) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation Per Segment or (DP) PT 62.5 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Lead Solder Temperature [2mm Below Package Base] Part Number AUG14C2-A Emitting Color Green Published Date : MAR 13,2008 140 °C 260°C For 3~5 Seconds Emitting Material GaP Luminous Intensity (IF=10mA) ucd min. typ. 1900 7990 Drawing No : SDSA2376 V3 Wavelength nm λP Description 565 Common Cathode. Rt. Hand Decimal Checked : Shin Chi P.1/4 Part Number: AUG14C2-A 13.8mm (0.54”) 14 SEGMENT DUAL DIGIT ALPHANUMERIC DISPLAY www.SunLED.com UG Published Date : MAR 13,2008 Drawing No : SDSA2376 V3 Checked : Shin Chi P.2/4 Part Number: AUG14C2-A 13.8mm (0.54”) 14 SEGMENT DUAL DIGIT ALPHANUMERIC DISPLAY www.SunLED.com AUG14C2-A Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 13,2008 Drawing No : SDSA2376 V3 Checked : Shin Chi P.3/4 Part Number: 13.8mm (0.54”) 14 SEGMENT DUAL DIGIT ALPHANUMERIC DISPLAY www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : MAR 13,2008 AUG14C2-A Drawing No : SDSA2376 AUG14C2-A V3 Checked : Shin Chi P.4/4