MAXIM MAX4195

19-1468; Rev 0; 4/99
Micropower, Single-Supply, Rail-to-Rail,
Precision Instrumentation Amplifiers
Features
The MAX4194 is a variable-gain precision instrumentation amplifier that combines Rail-to-Rail® single-supply
operation, outstanding precision specifications, and a
high gain bandwidth. This amplifier is also offered in
three fixed-gain versions: the MAX4195 (G = +1V/V),
the MAX4196 (G = +10V/V), and the MAX4197 (G =
+100V/V). The fixed-gain instrumentation amplifiers feature a shutdown function that reduces the quiescent
current to 8µA. A traditional three operational amplifier
configuration is used to achieve maximum DC precision.
♦ +2.7V Single-Supply Operation
The MAX4194–MAX4197 have rail-to-rail outputs and
inputs that can swing to within 200mV of the negative rail
and to within 1.1V of the positive rail. All parts draw only
93µA and operate from a single +2.7V to +7.5V supply
or from dual ±1.35V to ±3.75V supplies. These amplifiers
are offered in 8-pin SO packages and are specified for
the extended temperature range (-40°C to +85°C).
♦ Rail-to-Rail Outputs
See the MAX4198/MAX4199 data sheet for single-supply, precision differential amplifiers.
♦ Low Power Consumption
93µA Supply Current
8µA Shutdown Current (MAX4195/96/97)
♦ High Common-Mode Rejection: 115dB (G = +10V/V)
♦ Low 50µV Input Offset Voltage (G ≥ +100V/V)
♦ Low ±0.01% Gain Error (G = +1V/V)
♦ 250kHz -3dB Bandwidth (G = +1V/V, MAX4194)
Ordering Information
PART
TEMP. RANGE
PIN-PACKAGE
MAX4194ESA
-40°C to +85°C
8 SO
MAX4195ESA
MAX4196ESA
MAX4197ESA
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
8 SO
8 SO
8 SO
Applications
Medical Equipment
Selector Guide
Thermocouple Amplifier
4–20mA Loop Transmitters
Data-Acquisition Systems
Battery-Powered/Portable Equipment
Transducer Interface
PART
SHUTDOWN
GAIN (V/V)
CMRR (dB)
MAX4194
No
Variable
95 (G = +1V/V)
MAX4195
MAX4196
MAX4197
Yes
Yes
Yes
+1
+10
+100
95
115
115
Bridge Amplifier
Pin Configurations
TOP VIEW
RG- 1
IN- 2
8
RG+
REF 1
7
VCC
IN- 2
MAX4194
3
6
OUT
IN+
VEE 4
5
REF
VEE 4
IN+
SO
3
MAX4195
MAX4196
MAX4197
8
SHDN
7
VCC
6
OUT
5
FB
SO
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
________________________________________________________________ Maxim Integrated Products
1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.
MAX4194–MAX4197
General Description
MAX4194–MAX4197
Micropower, Single-Supply, Rail-to-Rail,
Precision Instrumentation Amplifiers
ABSOLUTE MAXIMUM RATINGS
Supply Voltage (VCC to VEE)..................................................+8V
All Other Pins .................................. (VCC + 0.3V) to (VEE - 0.3V)
Current into Any Pin..........................................................±30mA
Output Short-Circuit Duration (to VCC or VEE)........... Continuous
Continuous Power Dissipation (TA = +70°C)
SO (derate 5.9mW/°C above +70°C) ........................... 471mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) ............................ +300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VCC = +5V, VEE = 0, RL = 25kΩ tied to VCC/2, VREF = VCC/2, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA = +25°C.)
PARAMETER
SYMBOL
Supply Voltage Range
VCC
Quiescent Current
ICC
Shutdown Current
I SHDN
Input Offset Voltage
Input Offset Voltage Drift
(Note 1)
VOS
TCVOS
CONDITIONS
Single supply
2.7
7.5
Dual supplies
±1.35
±3.75
µA
8
12
±450
G = +10V/V, VCM = VCC/2, TA = +25°C
±75
±225
G = +100V/V, VCM = VCC/2, TA = +25°C
±50
±225
G = +1000V/V, VCM = VCC/2, TA = +25°C
±50
G = +1V/V, VCM = VCC/2, TA = TMIN to TMAX
±100
±690
G = +10V/V, VCM = VCC/2, TA = TMIN to TMAX
±75
±345
G = +100V/V, VCM = VCC/2, TA = TMIN to
±50
±345
G = +1000V/V, VCM = VCC/2, TA = TMIN to
±50
G = +1V/V
±1.0
±4.0
G ≥ +10V/V
±0.5
±2.0
CIN
VCM = VCC/2
Input Voltage Range
VIN
Inferred from CMR test
VCM = VEE + 0.2V
to VCC - 1.1V,
TA = +25°C,
∆RS = 1kΩ
CMRDC
VCM = VEE + 0.2V
to VCC - 1.1V,
TA = TMIN to TMAX,
∆RS = 1kΩ
VCM = VEE + 0.2V
to VCC - 1.1V,
f = 120Hz
1000
Common mode
1000
Differential
1
Common mode
4
VEE + 0.2
78
95
G = +10V/V
93
115
G = +100V/V
95
115
G = +1000V/V
115
G = +1V/V
73
95
G = +10V/V
88
115
G = +100V/V
90
G = +1000V/V
µV
µV/°C
MΩ
pF
VCC - 1.1
G = +1V/V
V
µA
±100
Differential
UNITS
110
G = +1V/V, VCM = VCC/2, TA = +25°C
I SHDN = VIL, MAX4195/96/97 only
Input Capacitance
2
93
VIN+ = VIN- = VCC/2, VDIFF = 0
VCM = VCC/2
CMRAC
MAX
test
RIN
AC Common-Mode Rejection
TYP
Inferred by PSR
Input Resistance
DC Common-Mode Rejection
MIN
V
dB
115
115
G = +1V/V
85
G = +10V/V
101
G = +100V/V
106
_______________________________________________________________________________________
dB
Micropower, Single-Supply, Rail-to-Rail,
Precision Instrumentation Amplifiers
(VCC = +5V, VEE = 0, RL = 25kΩ tied to VCC/2, VREF = VCC/2, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA = +25°C.)
PARAMETER
Power-Supply Rejection
Input Bias Current
Input Bias Current Drift
Input Offset Current
Input Offset Current Drift
SYMBOL
PSR
CONDITIONS
+2.7V ≤ VCC ≤ +7.5V; VCM = +1.5V;
VOUT = +1.5V; VREF = +1.5V; RL = 25kΩ to
+1.5V; G = +1V/V, +10V/V, +100V/V
6
VCM = VCC/2
15
IOS
VCM = VCC/2
±1.0
TCIOS
VCM = VCC/2
en
G = +10V/V
85
f = 100Hz
75
f = 10KHz
72
f = 0.1Hz to 10Hz
1.4
f = 10Hz
35
f = 100Hz
32
f = 10KHz
31
f = 0.1Hz to 10Hz
0.7
f = 10Hz
32
f = 100Hz
31
f = 10KHz
8.7
f = 0.1Hz to 10Hz
0.6
f = 10Hz
2.4
f = 100Hz
0.76
f = 10kHz
0.1
RL = 25kΩ to VCC/2
VOH, VOL
RL = 5kΩ to VCC/2
Gain Equation
Gain Error
MAX
20
±3.0
nV√Hz
µVRMS
nV√Hz
µVRMS
nV√Hz
µVRMS
pA√Hz
pARMS
30
100
VOL
30
100
VCC - VOH
100
200
100
200
±4.5
MAX4194 only
nA
pA/°C
16
VOL
nA
pA/°C
VCC - VOH
ISC
UNITS
dB
15
f = 10Hz
f = 0.1Hz to 10Hz
Short-Circuit Current (Note 2)
120
VCM = VCC/2
in
Output Voltage Swing
90
IB
G = +100V/V
Input Noise Current
TYP
TCIB
G = +1V/V
Input Noise Voltage
MIN
mV
mA
1+ (50kΩ/RG)
TA = +25°C,
VCM = VCC/2,
RL = 25kΩ,
VEE + 0.1V ≤ VOUT
≤ VCC - 0.1V
G = +1V/V
±0.01
±0.1
G = +10V/V
±0.03
±0.3
G = +100V/V
±0.05
±0.5
G = +1000V/V, MAX4194
±0.5
TA = +25°C,
VCM = VCC/2,
RL = 5kΩ,
VEE + 0.2V ≤ VOUT
≤ VCC - 0.2V
G = +1V/V
±0.01
±0.1
G = +10V/V
±0.03
±0.3
G = +100V/V
±0.05
±0.5
G = +1000V/V, MAX4194
±0.5
%
_______________________________________________________________________________________
3
MAX4194–MAX4197
ELECTRICAL CHARACTERISTICS (continued)
MAX4194–MAX4197
Micropower, Single-Supply, Rail-to-Rail,
Precision Instrumentation Amplifiers
ELECTRICAL CHARACTERISTICS (continued)
(VCC = +5V, VEE = 0, RL = 25kΩ tied to VCC/2, VREF = VCC/2, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA = +25°C.)
PARAMETER
SYMBOL
Gain Temperature Coefficient
(Note 1)
50kΩ Resistance Temperature
Coefficient (Note 3)
TC50kΩ
CONDITIONS
MAX
±1
±8
MAX4196/MAX4197
±1
±15
MAX4194
±16
ppm/°C
±0.001
%
300
pF
CL
G = +1V/V
-3dB Bandwidth
BW-3dB
VOUT ≤ 0.1Vp-p, G = +10V/V
VCM = VCC/2
G = +100V/V
G = +1000V/V
Slew Rate
Settling Time
MIN
VEE + 0.1V ≤ VOUT ≤ VCC - 0.1V, VCM = VCC/2,
G = +1V/V, +10V/V, +100V/V, +1000V/V
Nonlinearity
Capacitive Load Stability
TYP
MAX4194/MAX4195, G = +1V/V
SR
tS
MAX4194
250
MAX4195
220
MAX4194
17
MAX4196
34
MAX4194
1.5
MAX4197
3.1
MAX4194
0.147
VOUT = 2Vp-p, G = +1V/V
0.1%, VOUT = 2Vp-p
0.05
G = +10V/V
0.04
G = +100V/V
5
G = +1000V/V
Total Harmonic Distortion
THD
Input Logic Voltage High
VIH
Input Logic Voltage Low
VIL
Enable Time From Shutdown
ms
7
VOUT = 2Vp-p, G = +1V/V, f = 1kHz
0.001
%
VCC - 1.5
V
VCC - 2.5
V
VEE < V SHDN < VCC
t SHDN
G = +1V/V, 0.1%,
VOUT = +3V
MAX4195/MAX4196/
MAX4197 only
0.5
ms
t ENABLE
G = +1V/V, 0.1%,
VOUT = +3.5V
MAX4195/MAX4196/
MAX4197 only
0.5
ms
1
ms
0.5
ms
Power-Up Delay
On/Off Settling Time
V/µs
MAX4195/MAX4196/
MAX4197 only
SHDN Input Current
Time to Shutdown
ppm/°C
kHz
0.06
G = +1V/V
UNITS
G = +1V/V, 0.1%, VOUT = +3.5V
t ON/OFF
VSHDN = VCC - 2.5V to VCC - 1.5V, G = +100V/V,
0.1%, VOUT = +3.5V
±0.1
µA
Note 1: Guaranteed by design.
Note 2: Maximum output current (sinking/sourcing) in which the gain changes by less than 0.1%.
Note 3: This specification represents the typical temperature coefficient of an on-chip thin film resistor. In practice, the temperature
coefficient of the gain for the MAX4194 will be dominated by the temperature coefficient of the external gain-setting resistor.
4
_______________________________________________________________________________________
Micropower, Single-Supply, Rail-to-Rail,
Precision Instrumentation Amplifiers
MAX4195/MAX4196/MAX4197
SMALL-SIGNAL GAIN vs. FREQUENCY
1
0
-1
G = +1V/V
-2
-3
G = +10V/V
3
G = +100V/V
2
G = +1V/V
0
-1
G = +100V/V
G = +10V/V
-3
-4
-4
-5
-5
-6
1k
1
-2
1k
10k
100k
1M
FREQUENCY (Hz)
100
1k
10k
100k
1M
1
1
10
100
MAX4194
LARGE-SIGNAL PULSE RESPONSE
(GAIN = +100V/V)
MAX4197
LARGE-SIGNAL PULSE RESPONSE
(GAIN = +100V/V)
MAX4194 toc05
MAX4194 toc04
MAX4194 toc06
INPUT
(500mV/div)
INPUT
(5mV/div)
INPUT
(5mV/div)
OUTPUT
(500mV/div)
OUTPUT
(500mV/div)
OUTPUT
(500mV/div)
20µs/div
200µs/div
200µs/div
MAX4194
SMALL-SIGNAL PULSE RESPONSE
(GAIN = +1V/V)
MAX4194
SMALL-SIGNAL PULSE RESPONSE
(GAIN = +100V/V)
MAX4197
SMALL-SIGNAL PULSE RESPONSE
(GAIN = +100V/V)
MAX4194 toc07
20µs/div
1k
GAIN (V/V)
FREQUENCY (Hz)
MAX4194
LARGE-SIGNAL PULSE RESPONSE
(GAIN = +1V/V)
100
10
-6
100
10k
MAX4194 toc03
2
4
MAX4194 toc02-2
NORMALIZED GAIN (dB)
3
NORMALIZED GAIN (dB)
MAX4194 toc01-1
4
0.1% SETTLING TIME vs. GAIN
(VOUT = 2Vp-p)
SETTLING TIME (µs)
MAX4194
SMALL-SIGNAL GAIN vs. FREQUENCY
MAX4194 toc09
MAX4194 toc08
INPUT
(50mV/div)
INPUT
(500µV/div)
INPUT
(500µV/div)
OUTPUT
(50mV/div)
OUTPUT
(50mV/div)
OUTPUT
(50mV/div)
200µs/div
200µs/div
_______________________________________________________________________________________
5
MAX4194–MAX4197
Typical Operating Characteristics
(VCC = +5V, VEE = 0, RL = 25kΩ tied to VCC/2, TA = +25°C, unless otherwise noted.)
Typical Operating Characteristics (continued)
(VCC = +5V, VEE = 0, RL = 25kΩ tied to VCC/2, TA = +25°C, unless otherwise noted.)
COMMON-MODE REJECTION
vs. FREQUENCY
-40
-50
-60
-80
G = +1V/V
-70
G = +10V/V
-80
G = +100V/V
G = +100V/V
-90
-100
-100
-120
G = +1000V/V
-120
10
100
1k
10k
100k
10
100
1k
10k
1
10
100
0.010
MAX4196
G = +10V/V
SUPPLY CURRENT vs. SUPPLY VOLTAGE
MAX4194 toc14
110
100
G = +1000V/V
96
G = +100V/V
94
92
G = +1V/V, +10V/V
90
88
86
1k
10k
2
3
4
5
6
7
SUPPLY VOLTAGE (V)
8
6
4
-15
10
35
60
INPUT BIAS CURRENT vs. TEMPERATURE
10
INPUT BIAS CURRENT (nA)
MAX4194 toc16
8
-40
TEMPERATURE (°C)
MAX4195/MAX4196/MAX4197
SHUTDOWN CURRENT vs. TEMPERATURE
10
84
9
MAX4194TOC17
80
100
FREQUENCY (Hz)
8
6
4
2
2
0
6
100k
SUPPLY CURRENT vs. TEMPERATURE
G = +1V/V
MAX4195
0
-40
10k
98
90
0.001
1k
FREQUENCY (Hz)
SUPPLY CURRENT (µA)
0.100
SHUTDOWN CURRENT (µA)
G = +100V/V
1
100k
120
SUPPLY CURRENT (µA)
MAX4194 toc13
1.000
10
10
FREQUENCY (Hz)
MAX4195/MAX4196
TOTAL HARMONIC DISTORTION PLUS NOISE
vs. FREQUENCY
1
G = +10V/V
G = +1000V/V
FREQUENCY (Hz)
0
100
-110
-140
1
G = +1,000V/V
G = +1V/V
MAX4194 toc15
G = +10V/V
-60
CMR (dB)
PSR (dB)
-40
1,000
VOLTAGE NOISE DENSITY (nV/÷Hz)
G = +1V/V
MAX4194 toc11
-20
-30
MAX4194 toc10
0
VOLTAGE-NOISE DENSITY
vs. FREQUENCY
MAX4194 toc12
POWER-SUPPLY REJECTION
vs. FREQUENCY
THD + NOISE (%)
MAX4194–MAX4197
Micropower, Single-Supply, Rail-to-Rail,
Precision Instrumentation Amplifiers
-15
10
35
TEMPERATURE (°C)
60
85
-40
-15
10
35
60
TEMPERATURE (°C)
_______________________________________________________________________________________
85
85
Micropower, Single-Supply, Rail-to-Rail,
Precision Instrumentation Amplifiers
INPUT OFFSET CURRENT vs. TEMPERATURE
MAX4197
-50
-100
MAX4195
-150
MAX4194TOC19
INPUT OFFSET CURRENT (pA)
MAX4196
0
INPUT OFFSET VOLTAGE vs. TEMPERATURE
100
75
INPUT OFFSET VOLTAGE (µV)
MAX4194TOC18
50
MAX4197
50
MAX4196
25
0
-25
MAX4194
(G = +10V/V)
-50
MAX4194
(G = +100V/V,
G = +1000V/V)
-75
MAX4195
-200
-40
-15
10
35
60
-100
85
-40
-15
TEMPERATURE (°C)
10
35
60
85
TEMPERATURE (°C)
Pin Description
PIN
FUNCTION
MAX4195
MAX4196
MAX4197
NAME
MAX4194
1, 8
—
RG-, RG+
5
1
REF
Reference Voltage. Offsets output voltage.
2
2
IN-
Inverting Input
3
3
IN+
Noninverting Input
4
4
VEE
Negative Supply Voltage
—
5
FB
Feedback. Connects to OUT.
6
6
OUT
Amplifier Output
7
7
VCC
Positive Supply Voltage
—
8
SHDN
FUNCTION
Connection for Gain Setting Resistor
Shutdown Control
_______________________________________________________________________________________
7
MAX4194–MAX4197
Typical Operating Characteristics (continued)
(VCC = +5V, VEE = 0, RL = 25kΩ tied to VCC/2, TA = +25°C, unless otherwise noted.)
MAX4194–MAX4197
Micropower, Single-Supply, Rail-to-Rail,
Precision Instrumentation Amplifiers
Detailed Description
Input Stage
The MAX4194–MAX4197 family of low-power instrumentation amplifiers implements a three-amplifier topology (Figure 1). The input stage is composed of two
operational amplifiers that together provide a fixed-gain
differential and a unity common-mode gain. The output
stage is a conventional differential amplifier that provides an overall common-mode rejection of 115dB (G =
VCC
25k
IN25k
25k
RGOUT
MAX4194
RG+
25k
25k
REF
IN+
25k
VEE
Figure 1. MAX4194 Simplified Block Diagram
VCC
25k
IN-
FB
25k
25k
RG
25k
SHDN
MAX4195
MAX4196
MAX4197
REF
25k
VEE
Figure 2. MAX4195/MAX4196/MAX4197 Simplified Block
Diagram
The common-mode input range for all of these amplifiers is VEE + 0.2V to VCC - 1.1V. Ideally, the instrumentation amplifier (Figure 3) responds only to a differential
voltage applied to its inputs, IN+ and IN-. If both inputs
are at the same voltage, the output is VREF. A differential voltage at IN+ (VIN+) and IN- (VIN-) develops an
identical voltage across the gain-setting resistor, causing a current (I G ) to flow. This current also flows
through the feedback resistors of the two input amplifiers A1 and A2, generating a differential voltage of:
VOUT2 - VOUT1 = IG · (R1 + RG + R1)
where VOUT1 and VOUT2 are the output voltages of A1
and A2, RG is the gain-setting resistor (internal or external to the part), and R1 is the feedback resistor of the
input amplifiers.
IG is determined by the following equation:
IG = (VIN+ - VIN-) / RG
The output voltage (V OUT ) for the instrumentation
amplifier is expressed in the following equation:
VOUT = (VIN+ - VIN-) · [(2 · R1) / RG] + 1
The common-mode input range is a function of the
amplifier’s output voltage and the supply voltage. With
a power supply of VCC, the largest output signal swing
can be obtained with REF tied to VCC/2. This results in
an output voltage swing of ±VCC/2. An output voltage
swing less than full-scale increases the common-mode
input range.
* R1 = R2 = 25kΩ
** RG = INTERNAL TO MAX4195/MAX4196/MAX4197
RG = EXTERNAL TO MAX4194
R2*
VOUT1
VIN-
Input Voltage Range
and Detailed Operation
OUT
25k
IN+
+10V/V). The MAX4194’s gain can be externally set
between +1V/V and +10,000V/V (Table 1). The
MAX4195/MAX4196/MAX4197 have on-chip gain-setting resistors (Figure 2), and their gains are fixed at
+1V/V, +10V/V, and +100V/V, respectively.
A1
R2*
IG
R1*
VIN+ - VIN-
VOUT2 - VOUT1
RG**
A3
OUT
R1*
VIN+
(
VOUT = (VIN+ - VIN-) · 1 +
IG
R2*
A2
VOUT2
2R1
RG
)
REF
R2*
Figure 3. Instrumentation Amplifier Configuration
8
_______________________________________________________________________________________
Micropower, Single-Supply, Rail-to-Rail,
Precision Instrumentation Amplifiers
This disables the instrumentation amplifier and puts its
output in a high-impedance state. Pulling SHDN high
enables the instrumentation amplifier.
CLOSEST RG (1%) CLOSEST RG (5%)
(Ω)
(Ω)
Applications Information
+1
∞*
∞*
+2
49.9k
51k
+5
12.4k
12k
+10
5.62k
5.6k
+20
2.61k
2.7k
+50
1.02k
1.0k
+100
511
510
+200
249
240
+500
100
100
+1,000
49.9
51
+2,000
24.9
24
+5,000
10
10
+10,000
4.99
5.1
* Leave pins 1 and 8 open for G = +1V/V.
VCM vs. VOUT Characterization
Figure 4 illustrates the MAX4194 typical common-mode
input voltage range over output voltage swing at unitygain (pins 1 and 8 left floating), with a single-supply
voltage of VCC = +5V and a bias reference voltage of
VREF = VCC/2 = +2.5V. Points A and D show the full
input voltage range of the input amplifiers (VEE + 0.2V
to VCC - 1.1V) since, with +2.5V output, there is zero
input differential swing. The other points (B, C, E, and
F) are determined by the input voltage range of the
input amps minus the differential input amplitude necessary to produce the associated VOUT. For the higher
gain configurations, the VCM range will increase at the
endpoints (B, C, E, and F) since a smaller differential
voltage is necessary for the given output voltage.
Setting the Gain (MAX4194)
The MAX4194’s gain is set by connecting a single,
external gain resistor between the two RG pins (pin 1
and pin 8), and can be described as:
G = 1 + 50kΩ / RG
where G is the instrumentation amplifier’s gain and RG
is the gain-setting resistor.
The 50kΩ resistor of the gain equation is the sum of the
two resistors internally connected to the feedback loops
of the IN+ and IN- amplifiers. These embedded feedback resistors are laser trimmed, and their accuracy
and temperature coefficients are included in the gain
and drift specification for the MAX4194.
5
COMMON-MODE INPUT VOLTAGE (V)
GAIN (V/V)
MAX4194/MAX4195
G = +1V/V
REF = +2.5V/+1.5V
4
VCC = +5V/+3V
VEE = 0
TA = +25°C
A
3
B
F
C
E
2
1
D
0.03
0
0
1
2
4.97
3
4
5
OUTPUT VOLTAGE (V)
Figure 4. Common-Mode Input Voltage vs. Output Voltage
Rail-to-Rail Output Stage
The MAX4194–MAX4197’s output stage incorporates a
common-source structure that maximizes the dynamic
range of the instrumentation amplifier.
The output can drive up to a 25kΩ (tied to VCC/2) resistive load and still typically swing within 30mV of the
rails. With an output load of 5kΩ tied to VCC/2, the output voltage swings within 100mV of the rails.
MAX4195
OUT
AC-COUPLED
(VDIFF = 2V,
G = +1V/V)
(500mV/div)
Shutdown Mode
The MAX4195–MAX4197 feature a low-power shutdown
mode. When the shutdown pin (SHDN) is pulled low,
the internal amplifiers are switched off and the supply
current drops to 8µA typically (Figures 5a, 5b, and 5c).
SHDN
(5V/div)
50µs/div
Figure 5a. MAX4195 Shutdown Mode
_______________________________________________________________________________________
9
MAX4194–MAX4197
Table 1. MAX4194 External Gain Resistor
Selection
MAX4194–MAX4197
Micropower, Single-Supply, Rail-to-Rail,
Precision Instrumentation Amplifiers
VCC
MAX4196
OUT
AC-COUPLED
(VDIFF = 200mV,
G = +10V/V)
(500mV/div)
IN+
RISO
VOUT
INRL
VEE
RG = ∞
(MAX4194)
(INTERNAL, MAX4195)
VREF
CL
VREF
SHDN
(5V/div)
Figure 6a. Using a Resistor to Isolate a Capacitive Load from
the Instrumentation Amplifier (G = +1V/V)
50µs/div
Figure 5b. MAX4196 Shutdown Mode
INPUT
(50mV/div)
MAX4197
OUT
AC-COUPLED
(VDIFF = 20mV,
G = +100V/V)
(500mV/div)
OUTPUT
(50mV/div)
SHDN
(5V/div)
50µs/div
50µs/div
Figure 5c. MAX4197 Shutdown Mode
The accuracy and temperature drift of the RG resistors
also influence the IC’s precision and gain drift, and can
be derived from the equation above. With low RG values, which are required for high-gain operation, parasitic resistances may significantly increase the gain
error.
Figure 6b. Small-Signal Pulse Response with Excessive
Capacitive Load (RL = 25kΩ, CL = 1000pF)
INPUT
(50mV/div)
Capacitive Load Stability
The MAX4194–MAX4197 are stable for capacitive loads
up to 300pF (Figure 6a). Applications that require
greater capacitive-load driving capability can use an
isolation resistor (Figure 6b) between the output and
the capacitive load to reduce ringing on the output signal. However, this alternative reduces gain accuracy
because RISO (Figure 6c) forms a potential divider with
the load resistor.
OUTPUT
(50mV/div)
50µs/div
Figure 6c. Small-Signal Pulse Response with Excessive
Capacitive Load and Isolating Resistor (RISO = 75Ω, RL =
25kΩ, CL = 1000pF)
10
______________________________________________________________________________________
Micropower, Single-Supply, Rail-to-Rail,
Precision Instrumentation Amplifiers
identical two-element strain gauges) to the inputs of the
MAX4194. The bridge contains four resistors, two of
which increase and two of which decrease by the same
ratio.
With a fully balanced bridge, points A (IN+) and B (IN-)
see half the excitation voltage (V BRIDGE ). The low
impedance (120Ω to 350Ω) of the strain gauges, however, could cause significant voltage drop contributions
by the wires leading to the bridge, which would cause
excitation variations. Output voltage VOUT can be calculated as follows:
VOUT = VAB · G
where G = (1 + 50kΩ / RG) is the gain of the instrumentation amplifier.
Transducer Applications
The MAX4194–MAX4197 instrumentation amplifiers can
be used in various signal-conditioning circuits for thermocouples, PT100s, strain gauges (displacement sensors), piezoresistive transducers (PRTs), flow sensors,
and bioelectrical applications. Figure 7 shows a simplified example of how to attach four strain gauges (two
Since VAB is directly proportional to the excitation, gain
errors may occur.
RG
REFERENCE
RG+
IN+
R
VBRIDGE
VAB = VIN+ - VINR
RG-
IN-
REF
B
R
µP
VEE
R = 120Ω - 350Ω
A
MAX144
ADC
OUT
VCC
R
Figure 7. Strain Gauge Connection to the MAX4194
___________________Chip Information
TRANSISTOR COUNT: 432
______________________________________________________________________________________
11
MAX4194–MAX4197
Power-Supply Bypassing and Layout
Good layout technique optimizes performance by
decreasing the amount of stray capacitance at the
instrumentation amplifier’s gain-setting pins. Excess
capacitance will produce peaking in the amplifier’s frequency response. To decrease stray capacitance, minimize trace lengths by placing external components as
close to the instrumentation amplifier as possible. For
best performance, bypass each power supply to
ground with a separate 0.1µF capacitor.
Micropower, Single-Supply, Rail-to-Rail,
Precision Instrumentation Amplifiers
SOICN.EPS
MAX4194–MAX4197
Package Information
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 1999 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.